CUT MDF with a Circular Saw
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2024
- How I accurately and safely cut a 4x8 #MDF board using a #circularsaw. This technique is perfect for both beginners and experienced DIYers, and it helps achieve clean, precise cuts every time.
Check out the short version of this video: • Accurately Cut MDF wit...
In this step-by-step tutorial, I cover:
1. Measuring the MDF board
2. Accounting for the width of my saw plate
3. Using a guide board for a straight cut
4. Securing the guide board using speed clamps
5. Making the cut with my circular saw, ensuring a clean and straight edge
6. Double-checking the measurements after the cut is complete
Follow along as I demonstrate this tried and true method to cut MDF with a circular saw. Don't forget to LIKE, COMMENT, and SUBSCRIBE to DadBuilt DIY for more helpful tutorials and DIY project ideas!
Chapters:
0:00 - 0:28 - Introduction
0:29 - 0:47 - Tools needed
0:48 - 1:08 - Step 1: Measure each side
1:09 - 1:35 - Step 2: Measure the saw plate
1:36 - 1:56 - Step 3: Measure the total depth
1:57 - 2:17 - Step 4: Position the guide board
2:18 - 2:52 - Step 5: Use speed clamps
2:53 - 3:16 - Step 6: Cut MDF
3:17 - 3:35 - Step 7: Check measurements
3:36 - 3:47 - Outro - แนวปฏิบัติและการใช้ชีวิต
I like those saw horses, any videos on those? I don't typically work with larger sheets but might be more inclined to with those. lol
Thanks. They're from Toughbuilt, got them at Lowe's. I like that they have the slots for 2x4s and that you can make into a jobsite table (if I was ever organized enough). Good idea on a video - I'll have to add it to my idea board!
Thanks for watching! Check out the short version of this video: th-cam.com/users/shortsGp-nP5td6Zo
I'd include a suitable blade in the list of needed tools. Fairly important with mdf.
Great call out - what are you throwing on there?
@@DadBuiltDIY I'm getting good results with a cheap Bauer 40T finishing blade from Harbor Freight.
Thanks for sharing.
Is a 60 T blade ok to have a nice edge?
Thanks for watching. 60T should be just fine!