ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
2003-2007 GMC Sierra Front Bumper Removal
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2012
- This is a video showing the process for removing the front bumper from a 2003-2007 GMC
Sierra. Check my channel for another video showing how to remove the chrome top piece of the bumper if you need to do that as well.
Thanks for posting this. Same year truck, same rust point. Going to tackle this myself thanks to this video!
Probably the newest comment on here but I have the same yr truck, and the same rust spot. I am replacing it right now so thank you for the guidance!
@@TKB379 Welcome, glad it helps!
thanks for uploading the video, I smashed the front end of my truck 03 sierra 1500 and gotta remove the whole front end and replace it .. was waiting to get a chance to go and get it done with my buddy in his buddies heated garage ..(-20 deg celsius outside) but since I have a day off tomorrow i'll attempt it myself outside. can't wait to start now! watched both of the sierra videos for now! THANKS!
Killer, you guys rock. I have a 2006 GMC Sierra with a wrecked front bumper. Now replacing it will be a breeze.
Thank you very much for posting this!! I needed to change the lower valance on my 2004 GMC and this made it a breeze!! Thank you!!
I removed my bumper using your exact same instructions. Thanks for the vid.
Great video.....just had snow in my city and I slid into a guard rail and damaged my first bumper and this will save me a lot of money so I'm not going to the body shop now,woohooo!!!!! thanks man.
Dude really good video. My girlfriend rammed my '06 into a fence and now I gotta replace it. Thank you very much!!
My mom too hit my 07 and that's helps too
Thank you. This video will be helpful for when I need to remove my bumper
Welcome!
Ok just done yesterday and it worked just ad you dain and look beautiful THANKS AGAIN
Nice vid. Was wondering if that same bumper you took off would fit on my 2001 Sierra 1500 SLE?
With those push pins what can i use to pop them iff
Thanks for the video fixing to it the same way
Welcome
I only need to remove the bottom plastic part of the bumper , would I need to remove the whole bumper like you did? thank you
Is there no air bag sensors near the bumper? Anyway, I was trying to find a grill removal video and accidently went to this one....but I did find what I needed! Thanks!
I have a 04 Chevy avalanche I can't find any videos on how to remove the bumper I assume this is the closest I can get but how long do you think it took you to replace the bumper
Great video! No B.S. Just how to go about it. 👍
So that chrome bumper unbolts from the bottom black bumper cover that was attached to it? Great video by the way...i have an 04
Thanks for the video! I have a snowplow on my 2005 2500HD SLT. There's no rust on the truck itself except for on that piece and I plan on removing it. Where did you get your new piece from?
Do you know the size of all the bolts you took off I’m looking to buy them but idk what’s the size
Are the 03 yukon and 03 tahoe bumpers interchangeable
thank u
what year is your truck temptation 2
Did you put the 2003 front bummer on a 2000-02 truck cause I have a 01 and I am wondering if the 03-06 front bumper will fit my truck
gotta rip my bumper off cuz I got in an accident and the bumper is bent into the wheel well on the right side and it scrapes against my tire when I make left turns
I have a 2006 Chevy 3500, I have a brand new OEM bumper from a 2006 GMC, what modifications will be needed to put it on my Chevy?
I have the same truck and it had a sagging bumper and was wondering how do you fix that? Do I have to do all this?
How much different is it for a 99 Silverado
I just bought an 04' 2500 and the chrome bumper is dented and pushed in. I'm sure the brackets are bent. The bumper is about 130.00 bucks. iOS it possible to bend the brackets back straight again? Or just buy new ones???
You must live somewhere where it snows a lot lol or near the coast that thing rusted thru bad!
Would it be around the same for a silverado?
Where did you get that grill?!? I need that for my gmc i had one on my powerstroke and
perfect video. some douche backed into my bumper on my '01 sierra and took off.
The '03+ bumper and grill should just pop right on my '01 frame right?
did it?
Mark Martinez
No, I need to get '03+ frame horns and weld them on my '01 for the '03 bumper to bolt up.
i have a 99, i guess it'll be the same process right?
what size sockets used in video?
Thanks for the video... my question is this. On each end is a metal clip that supports the ends of the grill. These are not easily accessible. Please give us the process (secret) to do this part of the job. Going back is simple, you just push the grill toward the vehicle.
Mr BreakRAK I'd recommend you to just take the top headlights out if you're having trouble with the side clips
What size are the bolts ?
will a 2003 GMC sierra 1500 bumper and grill fit in a 2001 gmc sierra 1500 ???????
plz reply
Does work for a 2005 chevy tahoe
Did u get rid of ur ram
I need to know where to get front and back bumpers for a 2003 z71 Tahoe.
Check car parts dot com it searches junk yards across the country and you can sort parts by grade. Otherwise look online for new ones.
what tools do i need for this removal
The right ones
same thing happened to mine
any videos on a 05 Silverado front bumper removal?
+Mauricio Garcia No sorry, i've been too busy working in Oil fields the last 2yrs to make many videos. Hopefully someone else will post one!
+temptation2003 are these the same steps for an 01 !?
how do i remove the 2nd lights not the headlights or the fog lights the 2nd lower bumper lights
remove the headlights completely to have more room then on the side facing away from the center of the truck push in the clip holding it on with a flathead
The weld on one of the top belts broke
Does this bumper fit on 2000 GMC sierra? Or it's different
Will this work for a silverado too
Did it?
Will it be the same steps for a 2004 chevy silverado??
MrJaygarcia214 yes
Good video but where is the other half? You half assed it and now I don't get to see your final product. Dammit
I tried looking for a video for the 1999 GMC Sierra, do you know if the steps are similar?
my job is GMC saprprt