Toyota Corolla Ball Joint Diagnosis and Replacement with Sounds!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this video I replace the ball joint on my 2010 Corolla. Is your ball joint squeaking, knocking or complaining? Here's the tool I used to pop loose the ball joint from the wheel housing. It's called a ball joint separator. This job takes about 1-1.5 hours total for both sides if you don't run into any snags.
The tool used:
-www.harborfrei...
2009-2013 Toyota Corolla Ball Joint Replacement Tutorial. Ball Joint Failure Sound.
![ไปอยู่ไสมา - ช๊อปเปอร์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/sWuVNbRTJbc/mqdefault.jpg)
Wow, first video i saw that made it look so easy. Other videos removed axle and caliper and..🤦
Hey
Man I got a 2010 Corolla and mine makes that noise not all the time but only when my car is going slow and turning like when I back out my driveway or something. Is it the ball joint? Just want to make sure before I even try doing this 😅
You Ball joint Have Zerk / NPT Fitting , that means it's Greaseable, Obviously whoever installed the old ones did not know what they are doing because the NPT or Zerk was never installed and it was probably Never Greased.......
Great video, but next time I strongly suggest you get a camera man so that way we can see close ups and different angles.
Other than that, keep up the good work 👍
Jeremy #1
I have a 2009 Corolla and recently it has clunking noise when stop and when start. Since the ball joint is OEM since day 1, I think it is about time to change it. What brand is your new ball joint? Do you have issue removing the 3 nuts on the ball joint? Thanks for the video.👍
I don't remember the brand, I'm sorry. It wasn't difficult to loosen the 3 bolts with a small breaker bar.
@@ShareXP Not a problem. There is a MOOG brand but it needs to be grease but I don't have grease gun/grease but they have lifetime warranty. The other good brand is Beck Arnley but only 3 years. Your video just save me few hundred dollars plus $$ for Uber drop off and pick up car from repair shop. Thanks again.
Awesome, glad it helped.
Hello, have you had any issues with the ball joint since it's been a year you put it on? I'm torn between getting aftermarket and oem ones, there are videos out in YT which shows wheels bent arkwardly backwards because the ball joint failed catastrophically and disconnected
Nope, no issues!
@@ShareXP Excellent. Thanks!
Thank you, but some lighting could go along way.
I'll keep that in mind for the next one, thank you.
Does the corolla have an upper ball joint as well? Have an '06, lower definitely needs replaced.
Nope, just one I believe. SUV's and trucks generally have 2.
@@ShareXP Figured that was the case since I wasn't finding any uppers online. Thanks for the reply and thanks for the great vid. 👍
Bad video lighting