@@denchikhandmademodels4335 Извините,а пленка с эффектом карбона и металические накладки на арки есть в наборе? Или это отдельные плюшки не входящие в коробку?
Thanks)YES, you often have to adjust plastic or metal, this model turned out to be not very good quality (I did not expect this from tamiya, there was a lot of bad docking, a lot of debris, usually you get pleasure collecting tamiya, but it is with this set that you get pain and torment!)I don't know, maybe I just got one, although I think they have one mold for everyone!)
You can remove the hood and see what's inside)and if you seal it up, you will have to remove the entire body, or make a collapsible front part)and if there are no improvements inside, you can close it up, since there is nothing to look at there)
I understand what you're talking about)I made a radiator out of photo etching there, sensors with wires come from it, to look at it, you need to lift the lid)
![[Full Build] Building a 1/24 scale model of the Sauber-Mercedes C9 - Tamiya](http://i.ytimg.com/vi/S9iAtWd0IxY/mqdefault.jpg)
![[Full Build] Building a 1/24 scale model of the Sauber-Mercedes C9 - Tamiya](/img/tr.png)
Love this build. I'll have to get the detail up set.
Детализация и доработки - выше всех похвал! 👍🏻👍🏻👍🏻 Денчик, безупречная работа! В музей ее! 🎉🎉
Спасибо большое тёска!)
@@denchikhandmademodels4335 Извините,а пленка с эффектом карбона и металические накладки на арки есть в наборе? Или это отдельные плюшки не входящие в коробку?
Здравствуйте!)Скромный набор фототравления с металическими накладками в наборе есть,а вот декали под карбон нужно заказывать отдельно)
@@denchikhandmademodels4335 Спасибо большое за ответ!
Не за что)обращайтесь,если что!)
Очень круто!!!
Обалдеть детализация!!! 😳
Спасибо)
Great job! Did you have to adjust to fit the metal parts?
Thanks)YES, you often have to adjust plastic or metal, this model turned out to be not very good quality (I did not expect this from tamiya, there was a lot of bad docking, a lot of debris, usually you get pleasure collecting tamiya, but it is with this set that you get pain and torment!)I don't know, maybe I just got one, although I think they have one mold for everyone!)
@@denchikhandmademodels4335 I have the same experience!
@@bobwil9903 our business is not easy))
Why does everybody not fill and sand the front piece on this model? The real car had no seam there.
You can remove the hood and see what's inside)and if you seal it up, you will have to remove the entire body, or make a collapsible front part)and if there are no improvements inside, you can close it up, since there is nothing to look at there)
@@denchikhandmademodels4335 I think we are talking about different items. I meant the small flat piece that fits on the front above the radiator.
I understand what you're talking about)I made a radiator out of photo etching there, sensors with wires come from it, to look at it, you need to lift the lid)
@@denchikhandmademodels4335 AH! Now I understand! Nice!!
@@kencreppin2146 ОК!)