This MOD will INSTANTLY make YOUR CUBE BETTER! (Un-Maglev WRM v9)

Hey everyone! This will (most likely) be my final video of 2023! Wishing you all a happy holidays and thank you so much for 500 subs!
Next goal: 1,000 subs
368 days left, 484 subs needed
Original WRM v9: www.thecubicle.com/products/m...
Special Edition: www.thecubicle.com/products/m...
Angstrom WRM v9 Review: • This is the BEST cube ...
Resources:
Moyu Spring-Tensioned Cube
WRM v9 Ball-Core
Screw Driver
Good Core Lube (SCS Lubes, Silk, Weight X, XMT, etc)

[@nivcubing]

2:04 the main thing that will help with corner twists is tightening the cube the speed of the cube is the thing to get used to

[@TWCubed]

while tightening it does help with corner-twists, it then makes the cube too tight which makes you prone to horrible lock-ups

[@nivcubing]

weird, it doesnt happen on my wrm v9@@TWCubed

[@anderscubes]

I can proudly say I watched both vids 😎

[@iiluminiac6217]

If you want a more stable version of the WRM V9 just get the RS3M V5 UV ballcore its almost half the price and the only thing that is missing from it is just that theres no edge magnets

[@TWCubed]

that's not the only difference. while yes, both cubes are amazing, the RS3M v5 has a really cheap feeling compared to the premium feeling of the v9. On top of that, it's not nearly as stable as the WRMv9 on loose tensions, and on tight tensions, it locks up a lot. It's better for the price, but the v9 is a better cube. (MY OPINION)

[@iiluminiac6217]

@@TWCubed I think the stability difference isn't too obvious between the two since a lot people say that the performance of the two is very similar after setup

[@TWCubed]

@@iiluminiac6217 after setup, rs3m v5 still feels cheap. It performs well, but still feels cheap

[@iiluminiac6217]

@@TWCubed ofc it's gonna feel cheaper than the WRM because the WRM has edge magnets that make it feel more magnetic

[@rishideepak-speedcuber]

W vid

[@nivcubing]

i disagree.i like it alot better fast

[@TWCubed]

depends on personal preference. However, from what I've seen, for faster solvers, it's a lot better to use a controllable cube in comp vs a faster cube because under pressure, you are more prone to +2's, misturns, etc. It may feel nicer to have a fast cube, but it doesn't mean you'll necessarily get better times

[@nivcubing]

ok, i do get better times tho@@TWCubed

[@TWCubed]

@@nivcubing how fast do you usually turn? if you turn slower, it may be fine, but if you turn fast, then you are prone to a lot more mistakes (fast meaning 6.5TPS+)

[@nivcubing]

about 8 tps normally@@TWCubed