What a GREAT video! I just installed mine and was scratching my head at first. Saw your video with the glue idea and the details on where specifically the bottom bracket mounted to and I had mine installed in 5 minutes!!! Thank you so much for the video!!👍👍
So pleased it worked for you Chris. Brilliant 🤩. Last year I traded in my 1250GS and took everything off because they do not want it and do not pay a penny. Fitted the Lone Rider to my mates 1250GS, had to watch my own video and we did it in minutes👌🏼🤣🤣
@@davebarrowcliffe1289 ha ha, absolutely right Dave. When I fitted all 3 GS’s with the ‘orange’ headlight guards we set off for three days in Snowdon, expecting to get stopped by the first police car that came towards us…nothing😬🤩
I just received mine. The nuts are now welded into the frame. For some reason, they also sent the nuts for the older revision like you have. Having the nuts welded makes this process of installing go so much easier. (Edited) After watching a couple of other videos, I see what happened. You leave the standoffs on the plexiglass. The plexiglass actually fits correctly in the gromets if you remove it from the hinged screen first. That was the part I missed. The standoffs on mine were installed incorrectly from Lonerider but after I switched them to the correct locations I was easily able to snap the plexiglass in place and then close the screen. I did pick up some BLAST brand Silicon Sprays to spray in the gromet holes which made everything go together easier and allowed the standoffs to slide in and out of the grommets easier. Now that it's done, it looks and works great.
Hi Barrett, that is very interesting 🤔. Think Lone Rider must have had a lot of negative comments about the installation. I also agree that their instructions are pretty useless, thought they would have made them much easier to understand 🤷🏼♂️
Also, some say you have to remove panels. You do not. It is easy to just slide the lower bracket underneath the side panel. You might have to use your fingers on the outside to pull the panel out slightly but there is no need to remove any panels. Once you drop the bottom bracket / nut into the hex hole you can simply use your hands and find the opening with the bolt and get it started on the threads. Then switch to the rachet tool to tighten.
I refitted the unit to a mates GS the other week before I px my beloved 1250GS for a Goldwing…which is unbelievable 🤗. Gluing the nut in to the ‘frame’ is just to hold it there and the bolt goes through from the bottom. However I believe they may have changed the design a little🤷🏼♂️
Just a heads-up, if you damage or lose the yellow x part, LoneRider won’t sell it separately. This happened to me so I’ve now removed the whole thing. What a scam!...😡
Hi Norm. I just watched you tube vid of teapot 1 fit one on his 1200 GS . He said it was simple. It looks the same but I guess it Must be much harder on the 1250?
On The 1250 GS 2021 that hexagonal bolt is irrelevant cause the Adaptive headlights extension "Plastic" Inserts go there and it is a Nightmare to get that headlight out without breaking those Nibs
Hi I’ve just bought the same protector. I have a 2022 1250gs with the factory fitted spot lights. Are you saying I do not have the bolt hole for the fixings due to the lights being there ?
Yes Stephen that is exactly right and caught me out for a while. But it is easily sorted. The bolt that devoured the lights is 6mm. Tahoe the nut off that, use the Line Rider 8mm nut as a ‘spacer’ to hold you headlight guard bracket and reuse the 6mm nut to bolt them all together. Works a treat. I also take the ‘mushroom’ studs off the Bottom of the guard so the whole grill and Perspex screen fold down for cleaning and maybe riding at night if you want more light. Hope all that makes sense?
@@stephenhendry447 meant to say Stephen that I took off the side panels and the beak because I just could not find the hexagonal 'hole' that Lone Rider spoke about. Once I took everything off it all made sense. On the GSA you can see the 'hole' straight away because the lights do not use the attachment point but are fixed on the engine bars. but having removed them the whole job was a lot easier because I could see what the problem was with the GS and what to do to solve it. I cannot understand why Lone Rider do not warn GS riders with Lights fitted by BMW what to look out for?
@@normski3091but for the fog lights you have to take the beak off entirely to actually torque down the 6mm nut, right? I cannot find a way to tighten the 6mm with the brackets in place.
What a GREAT video! I just installed mine and was scratching my head at first. Saw your video with the glue idea and the details on where specifically the bottom bracket mounted to and I had mine installed in 5 minutes!!! Thank you so much for the video!!👍👍
So pleased it worked for you Chris. Brilliant 🤩. Last year I traded in my 1250GS and took everything off because they do not want it and do not pay a penny. Fitted the Lone Rider to my mates 1250GS, had to watch my own video and we did it in minutes👌🏼🤣🤣
Any German Policeman would get a chubby on in anticipation of being able to tell you how many ways this is "verboten"...
😂😂😢
@@davebarrowcliffe1289 ha ha, absolutely right Dave. When I fitted all 3 GS’s with the ‘orange’ headlight guards we set off for three days in Snowdon, expecting to get stopped by the first police car that came towards us…nothing😬🤩
I just received mine. The nuts are now welded into the frame. For some reason, they also sent the nuts for the older revision like you have. Having the nuts welded makes this process of installing go so much easier.
(Edited)
After watching a couple of other videos, I see what happened. You leave the standoffs on the plexiglass. The plexiglass actually fits correctly in the gromets if you remove it from the hinged screen first. That was the part I missed. The standoffs on mine were installed incorrectly from Lonerider but after I switched them to the correct locations I was easily able to snap the plexiglass in place and then close the screen. I did pick up some BLAST brand Silicon Sprays to spray in the gromet holes which made everything go together easier and allowed the standoffs to slide in and out of the grommets easier.
Now that it's done, it looks and works great.
Hi Barrett, that is very interesting 🤔. Think Lone Rider must have had a lot of negative comments about the installation. I also agree that their instructions are pretty useless, thought they would have made them much easier to understand 🤷🏼♂️
Also, some say you have to remove panels. You do not. It is easy to just slide the lower bracket underneath the side panel. You might have to use your fingers on the outside to pull the panel out slightly but there is no need to remove any panels.
Once you drop the bottom bracket / nut into the hex hole you can simply use your hands and find the opening with the bolt and get it started on the threads. Then switch to the rachet tool to tighten.
Thanks for the video. Just installed mine and I’m glad I have a GSA
Excellent Matthew...they do look good😀
I don't understand how you attach the bottom bolt where you glued that nut into?
I refitted the unit to a mates GS the other week before I px my beloved 1250GS for a Goldwing…which is unbelievable 🤗. Gluing the nut in to the ‘frame’ is just to hold it there and the bolt goes through from the bottom. However I believe they may have changed the design a little🤷🏼♂️
OK gotcha. Thank you
Just a heads-up, if you damage or lose the yellow x part, LoneRider won’t sell it separately. This happened to me so I’ve now removed the whole thing. What a scam!...😡
Wow Norman, never realised that…makes you never want to buy from them again🥵
Just used this tutorial and glad I found it.
Thanks
Thank you Simon, so pleased it helped😃
Hi Norm. I just watched you tube vid of teapot 1 fit one on his 1200 GS . He said it was simple. It looks the same but I guess it Must be much harder on the 1250?
Yes I also watched it but crucially he does not fit the Perspex screen🤷🏼♂️. That makes it easy peasy🤣
You saved me a lot of work. Thank you
Brilliant 🤩 so pleased it helped🤗
Thanks for the video, saves me some time for sure
On The 1250 GS 2021 that hexagonal bolt is irrelevant cause the Adaptive headlights extension "Plastic" Inserts go there and it is a Nightmare to get that headlight out without breaking those Nibs
The whole thing was a nightmare 😮. Managed to remove it with no problems and fitted it perfectly to my friends 1250GS 😊
Ordered and will be re watching this video to install as I'm not reading those instructions......
Ha ha…I hear they have made them easier to install…will be interesting to see 😵💫
Hi I’ve just bought the same protector. I have a 2022 1250gs with the factory fitted spot lights. Are you saying I do not have the bolt hole for the fixings due to the lights being there ?
Yes Stephen that is exactly right and caught me out for a while. But it is easily sorted. The bolt that devoured the lights is 6mm. Tahoe the nut off that, use the Line Rider 8mm nut as a ‘spacer’ to hold you headlight guard bracket and reuse the 6mm nut to bolt them all together. Works a treat. I also take the ‘mushroom’ studs off the Bottom of the guard so the whole grill and Perspex screen fold down for cleaning and maybe riding at night if you want more light.
Hope all that makes sense?
Sorry about predictive text. Let me know if I need to explain anything 🤔
@@normski3091 that’s good to know. Sounds like an easy fix. Thanks for replying 👍
@@stephenhendry447 meant to say Stephen that I took off the side panels and the beak because I just could not find the hexagonal 'hole' that Lone Rider spoke about. Once I took everything off it all made sense. On the GSA you can see the 'hole' straight away because the lights do not use the attachment point but are fixed on the engine bars. but having removed them the whole job was a lot easier because I could see what the problem was with the GS and what to do to solve it. I cannot understand why Lone Rider do not warn GS riders with Lights fitted by BMW what to look out for?
@@normski3091but for the fog lights you have to take the beak off entirely to actually torque down the 6mm nut, right? I cannot find a way to tighten the 6mm with the brackets in place.
Neat