20:23 that is one of the best features of any radio on the market :) - Thank you for the walk through on this radio, I previously tried to adjust the EPA's on channels 5-7 without success. I will try again but maybe I got a bad radio.
It doesn’t has the real time voltage and temperature reading function. Basically it is the transmitter has a balance port for 2s and 3s Lipo for you to check the battery voltage and a temperature sensor to plug to the transmitter. So the receiver is just like other normal receiver which doesn’t has any connection to sensor
Im using dumborc controller for my new mn rc...day 1 me buy and install the receiver dumborc to my mn rc..after sucess install n play around 30 minutes...day 6 i want to play with my rc n switch on the dumbo rc with the receiver on..ill found out my rc cannot go to right just go to the left and straight..n someone check for me my new dumborc controller..yes the controller is faulty...what happen
Depending on your need, if u need to have different setup for each model, the turbo racing is better option. Other than that, the dumborc is pretty decent for its cost as it has very fast responses and long range control. I personally prefer the feel of the dumborc.
Aro800 Turbo Racing 7ch transmitter can takes 2s Lipo and the battery tray can fit for 1200mah easily. And I used 2s 850mah and 1000mah (a bit tight) for dumborc.
I personally prefer the dumborc as it is cheaper and quite ergonomic to me, my rc mainly are crawler, so the dumborc does the job well to me. The other one have more settings function at higher price tag.
20:23 that is one of the best features of any radio on the market :) - Thank you for the walk through on this radio, I previously tried to adjust the EPA's on channels 5-7 without success. I will try again but maybe I got a bad radio.
Hi,
The box say Telemetry does it have telemetry?
Thanks!
It doesn’t has the real time voltage and temperature reading function. Basically it is the transmitter has a balance port for 2s and 3s Lipo for you to check the battery voltage and a temperature sensor to plug to the transmitter. So the receiver is just like other normal receiver which doesn’t has any connection to sensor
@@jeffreytfl5832 thanks, for the explanation.
Also do you think the receiver would fit in a SCX24?
@@theflyerpr40d I dun have the scx24, the size of the receiver is approximately abt 3.6x2.6x1.6cm
@@theflyerpr40d I took the receiver apart and did not use the casing. I double sided taped the board and it works fine.
How this TB-X2 comparing to Radiolink RC6gs? which would you prefer?
Im using dumborc controller for my new mn rc...day 1 me buy and install the receiver dumborc to my mn rc..after sucess install n play around 30 minutes...day 6 i want to play with my rc n switch on the dumbo rc with the receiver on..ill found out my rc cannot go to right just go to the left and straight..n someone check for me my new dumborc controller..yes the controller is faulty...what happen
Check the adjustment knob on the top of transmitter for channel 1, it should be at center position if your rc steering is set correctly
@@jeffreytfl5832 alredy check bro but still same😂
alguno de ustedes consiguio emparejar con radio sanwa?
did any of you get paired with radio sanwa?
I didn't have any sanwa so I don't have the chance to try
@@jeffreytfl5832 thanks guy
@@ramonsalvadorgonzalezcampo721 you're welcome
Good video keep it up ! Varie clear good explanation of everything! Subbed
Christopher Last Name Thank you very much!
@@jeffreytfl5832 no problem!
very clear and comprehensive explanation. I like it very much! so useful! GOOD
Which one is better in performance?
Depending on your need, if u need to have different setup for each model, the turbo racing is better option. Other than that, the dumborc is pretty decent for its cost as it has very fast responses and long range control. I personally prefer the feel of the dumborc.
How many cells and mAh is the lipo you use for the hobby porter. What is the max volts cannot handle?
Aro800 Turbo Racing 7ch transmitter can takes 2s Lipo and the battery tray can fit for 1200mah easily. And I used 2s 850mah and 1000mah (a bit tight) for dumborc.
so who's the winner ..i got choice to make
It depends on what you want, but for general crawling rc, I think dumborc is better value for money
Personally, which one is better feel in hands and better built quality and performance? Im still stuck between the 2 😑 thanks in advance.
I personally prefer the dumborc as it is cheaper and quite ergonomic to me, my rc mainly are crawler, so the dumborc does the job well to me. The other one have more settings function at higher price tag.
Thanks for the info👍
You are welcome
PLEASE UPLOAD MORE VIDEO...