Inside Out Carburetor Tricks!!!
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- amzn.to/2MiyWOt 12Pack Brake Parts Carb Cleaner
amzn.to/397fvAZ 6Pack WD40 with Nozzle Can
amzn.to/2MlOkcD Ultrasonic Cleaner 3 Liter
amzn.to/39W8IcB Fine Grit Sandpaper Assortment
amzn.to/3qEVJmi Wooden Q-Tips
amzn.to/2Y9GuWd Torch / Carb Cleaner Needles
In this video I show you a few tips that I use when cleaning a carburetor on a snowblower, lawnmower, or tractor.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC. - บันเทิง
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
![แฮงแงงแฮงงาม - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/vCGJTy9ZeP8/mqdefault.jpg)
some very helpful tips in this video , with the needle on oil
I did a video over 2 years ago on the Q-tip with toothpaste or fine valve grinding compound. Its called leaky honda style carb cleaning, or something like that, LOL. But I have never considered doing what you did with the needle! Absolutely GENIUS Bob!!!! I cant wait to try it...
I will have to check out your toothpaste video, Some comments are talking about using toothpaste, I thought it may have been Taryl, but after looking at his teeth, I don't think so. Really appreciate the sub. and hanging out on the chats. Bob
Hi guy's
These are great tips for stopping the leaks we seem to be getting more of nowadays.
I've been using the q-tips a lot since you made your video Steve, it works great but i have never seen the way you cleaned your needle before Bob.
Another tip i picked up a while ago was using a stick on the seat, any stick with a point on it works but a cuticle stick works best for me.
Because its only wood its not going to damage the metal seat but at the same time its hard enough to remove any crusty build up.
Its worked every time and took my carb cleaning to a new level.
Thanks Bob, reconditioning the needle is ingenious
Great tips Bob. Thanks for sharing them.
Great tips. I think I saw Taryl on Taryl fixes all, do the Q-tip trick. Thank you
You are so welcome!
good idea! and save some money reconditioning the needle,
I guess TH-cam can read my thoughts now. I recently was suspecting my float needle was leaking on my Cub Cadet. Going to have to try this thanks Bob.
I actually gave you credit for the seat polishing idea on my TH-cam video. 👍
Nice work!
Nice tips thx double wide
No problem 👍
Toothpaste works too. I learn the qtip trick from forums years ago
good to know softer than grinding compound.
Oh for God sakes where have these tips been all my life? Thank you for sharing these with us. The needle honing one is going to save me this afternoon Sir! Thank you so much.
You are so welcome!
First time ⏲️I even that that is awesome
Great tips to know ! Thanks
great video thanks for sharing !!
Great job Bob. Nope never seen anyone do that with the needle, cool trick. Yep I keep a container of Qtips on my carburetor bench. Thanks Doublewide6
Right on
Thanks for the tips.
You bet!
Good one I agree not sure if it Mustie1 first but he is quite ingenious with what he does when he doesn’t have the proper tool. Keep up the great tips Doublewide6!
Absolutely
Great tips! Never seen the needle “honing” before. Thanks for sharing!
Glad it was helpful!
Great tips thanks Bob
You bet!
Nice tip! I might add if you dont mind , a cycle guy told me that when it's really bad, you can use acetone for the seat! Nice one about the needle thanks and I thoroughly enjoyed your live feed last night!
Thanks for the info!
As usual excellent tips. Thanks for the video.
Thanks for watching!
Nice tips!! Thanks!!
No problem!
Good advice mate and as always a great video
Glad you enjoyed it. Rumor has it that you are looking for a Mr. January. I'm in.
@@doublewide6 lol fantastic.. I will sort something out..
This is how I use my PB Blaster with the WD40 straws. Honestly, it's the only good thing about WD40 lmao. Cheers Bob! Zip~ Hugs to the little man.
Hey Bob just wanted to add that when you have rust on the stainless needle or any kind of crusty stuff! I take a dremel and wire brush wheel and you can make that needle look brand new again !
I
Great tip,s young man.i found p.b blaster in the nee style spray can see you later young man and your family
Right on
@@doublewide6 oh one other thing I got my powr kraft mower back in running shape
Wow! I haven't ever saw that needle trick! Thanks!
Happy to help!
Great tips, DW6. I'm like you (& a lot of other TH-cam fix-it guys), I always try to rescue equipment without spending $. That's the fun of it. But recently I simply had to buy a Briggs lawn mower carb & I got one from Amazon for about $9. Hard to justify the time required to save a carb vs. these low prices, I gotta admit. BTW, I closely examined the nine buck unit & it is extremely well-machined. I haven't run it yet because it's winter here, but I've used aftermarket parts for years with great success.
Very true! Sometimes the gaskets are cheap, but machined metal is machined metal.
If you use valve compound make sure it's all flushed out. Doesn't take much to block main jet. I know from experience. Lol
Just tried that out (future video).
A lot of great tips in this video Bob. Should help a lot of people. I enjoyed the live the stream sorry I had leave. Have a great weekend. God Bless!!
Thanks, you too!
amzn.to/2MiyWOt 12Pack Brake Parts Carb Cleaner
amzn.to/397fvAZ 6Pack WD40 with Nozzle Can
amzn.to/2MlOkcD Ultrasonic Cleaner 3 Liter
amzn.to/39W8IcB Fine Grit Sandpaper Assortment
amzn.to/3qEVJmi Wooden Q-Tips
amzn.to/2Y9GuWd Torch / Carb Cleaner Needles
!!!!!!!! Your link to the 6Pack WD40 with Nozzle Can is the same as the 12Pack Brake Parts Carb Cleaner.
@@LunkerFishing Thanks I will fix it.
Those newer WD40 nozzles are great but would probably cost a lot more if on all cans.
I agree, but they could send one nozzle with a spray can kit of 12 cans.
@@doublewide6 Yeah, that would be awesome.
Great tips ! TKS.👍👍
5:45 .....that's what she said!
Better talk to Big Lou!
Awesome tips. I've had a few rubber needle issues. I'll try this. Thanks
I think it will work just great for you.
Ouch on using valve grinding compound on carb seats. I use Flitz as it is much less abrasive
Love the other tricks BTW
Great tip! Toothpaste works. also there are very fine grits of valve grinding compound.
never seen a spray nozzle like that, But i have not purchased WD40 in years still have some left from the can i bought 20 years ago thanks... I watch Mustie1 as well
Great point!
I bought 2 cans of Supertech brake cleaner at Walmart last week, $1.99 a can.
Haven’t used it yet, though. 6” magnetic parts bowl was also$1.99. Unfortunately, the magnet is backwards fro the HF ones. So it won’t nest with them. No biggie.
Great video and tips.
Good stuff
Do you possibly have a video on how to install lights on an exmark zero turn lawnmower rollover bar?
By the way hope all is well ?
Spray tip is a great and Q- tip is good tip , really like the needle in the drill tip .
Glad it was helpful!
Great tips and thanks for the vid.
You bet!
Pretty cool stuff DW6, thanks! Enjoyed your live stream yesterday! 👍👍
Thanks for coming
That's a first for me - never seen anyone recondition the needle rubber tip. Great stuff - thanks for sharing
Thanks for watching! Did I see you on Mick's live last week?
@@doublewide6 yep im there most saturdays. My channel is HobbyMotor
Always look forward to your videos and thanks for the tips.
I am looking into ultrasonic cleaners. Looks like you have a 10qt. cleaner. It would be great if you could do a video regarding your ultrasonic cleaner.(That is if you haven't already done so) It would beneficial to know-
What cleaning solutions you use? How you use the cleaner ? And how to choose the right ultrasonic cleaner ? Thanks again
Steve and Donyboy and Taryl have good videos on ultrasonic cleaner solutions. I will make one sometime soon.
The first one
Great tips!! Any idea how to rescue a carb that's been damaged by the oxygenated ethanol gas we're forced to use now? As in cleaning out the tiny passages that get clogged with the crystallized fuel? I've tried piano wire on one and it was OK afterwards, but I have a really bad one that may not clean up with that trick.
Let it soak for a couple days try vinegar to remove the oxidation.
@@doublewide6 Thanks!
Spray can yes👏 float needle 🤦♂️ That ring you are seeing is a coating on the viton...nothing more. That’s all you removed. I’ve been in this carb business along time. I have seen viton tip grooved bad and to get a customer by in a pinch what I do with my seat tools is open up the circumference of the seat...give unused rubber on the tip a place to contact new seat ring. This is a trick I started doing on old brass tip needle and seats. Viton was a major improvement. I’ve never used qtips, nor a ultra sonic cleaner. Just assortment of wire brushes, simple green, paint gun cleaning brushes, and my own homemade seat tools.
I'm very interested in your homemade seat tools could you send a pic. or forward a link to what it may look like. I always have issues with Briggs intek engines with leaky needle and seats. Thanks
Hi double wide how you doing, how's your son doing I hope he's been doing well?
I just want to say your tip on using the dw40 oil aerosol caps. I've seen this guy on Hank's Garage demonstrating that first a few years ago on on his TH-cam Channel. I don't know if you seen his video clips or familiar with him. I've been watching his videos as long as I've been watching yours and donny-boy 73, Bruce shop, mustie1 and others Small Engine TH-camrs. Just wanted to give you a heads-up that I've been using the dw40 aerosol caps on my aerosol cans for a while now.
I thought either the carbs had a little rubber seal that meets with the needle valve or the needle valve had a little rubber tip on it?????
I never thought it was a metal to metal seal.
When you first did the test it popped off at 10, after you honed it it was popping at 3-5 less.
Bob i wished i had known that about the wd40 cap trick as i dont know how many of those cheap nozzles i have broken. Nice tip also on the needle fix. Great tips. Thanks! 🇺🇸👍🍺 Roger
Glad to help
Bob did you test the needle with a Mityvac afterwards? I’d be curious how it holds pressure after the Re-dressing. Thanks for the tip. I had one of those last week and drove 25 miles to get a good used needle!!! Timing is everything. The last time I tried “cleaning” the rubber tip it broke off!!
I didn't mityvac it. But it seems to be holding just fine. I don't know if the vitral tip has a coating on it or not. The customer said it was leaking gas, the tank was empty when I got it. Looking at the ridge in the needle it was closed so it should not have been leaking. I'm thinking the guy was priming like mad because it would not start and that is where the leak came from. For what it is worth I did it again yesterday on a lawnmower and that seems to be holding just fine (but this one was not leaking originally).
Some have the gray Teflon coating on them. Love the tip I will try with a few old ones I have laying around!
Good stuff man. I guess if you spray carb cleaner on your hands for years, it may cause cancer. I know it really dries out your hands and need lotion.
I is mainly breathing it that is really bad.
What do you use as cleaning fluid in you ultrasonic? And is there any difference in what works best for price?
any degreaser or dawn soap. sometimes gas in a jar to clean the outside of a carb, then the dawn treatment.
@@doublewide6 is the dawn treatment 50/50 dawn and water? I'm new to ultrasonic and trying to learn.
Ethanol fuel is a real killer of free breathing fuel systems
It causes so many problems, that I'm not sure if it justifies its use.