This video is superior to others because the gentleman is precise and explains why he does what he does. Without his thoroughness, one could easily be unaware of crucial steps. Nicely done Ben! Cheers, John PS I had to modify my refill canister nozzle, with a wee slot to allow the butane entry into the Thermacell, otherwise the gas could not flow.
Same with those propane bottles for camp stoves. They sell refillable versions you can refill from a 20lb tank. Go from $7-8 per bottle to $1 per bottle.
Never had one detonate? I mean I’m about to try it so if I’m a few fingers short I’ll send an update but it’s just staggering how you can’t buy just the butane cartridges for them separately. So you end up with hundreds of extra blue patches if you buy their products as intended, if this works continuously it’s the best money saving method for sure
I thought those canisters contained the chemicals used to repell mosquitos. I never thought they would just contain butane considering their price. Ridiculous. The price of the canisters has kept me from buying one of these things. But knowing this, I will buy one. And refill it like you did. Thank you!
Hej, followed the instructions to the letter and went even to class ohlsson to buy same gas and screws. All goes as planned until I try to refil It massively leaks on the side and barely fills the tank. Any tips on that?
Måste få tajt passning på flaskans smånipplar, test vilken som passar bäst, vänd upp ner på fyllflaskan så du verkligen fyller rakt ner i thrmacell behållaren! Lycka till.
Hittade denna nu, mycket bra video dock lite roligt att du hänvisar till en Philips No:2 skruv när lådan från Clas Ohlson som du visar klart visar att skruvens skalle heter PZ-2 eller i klartext Pozidrive No:2, två olika stjärnmejselspår. 👍👍 Mvh
You should not twist the brass piece any more than you have to to pull it out. It will come straight out. The twisting motion tends to erode the hard plastic & when you push the brass part back in it may not seal as well as it needs to....
I completely disagree with this particular video (but agree in general across TH-cam). He made this video so perfect for beginners. And I really appreciate the detailed info about what surfaces are important not to scratch, and what the risk is if you do. .the demos and closeups were also useful. It's just about a perfect video tutorial tbh
Should be very straightforward. I suggest you put on some gloves to protect your hands and then play around with the injection procedure because if you don’t wiggle it around on the filling tube from your mani bottle, then you quickly have an overpressure inside and excess air will prevent you from filling. So, essentially what you need to do is to try to purge out air while you fill up with liquid.
The problem is that the Pads themselves are more expensive then buying the combo making this not more cost effective. 12 Mats are $15 where 30 with canisters are $39 so roughly the same but you get the fuel too.
Do you have and use a thermocell? I ask because I always have so many blue pads left over when my butane is gone (for a number of reasons that I could explain if you're interested 😂) So if you don't already have one, you might be surprised how much faster the butane goes than the blue pads, making the ability to refill still cost effective and helpful to extend the time between buying refills.
Brilliant , I love reusing consumables . Cost saving is worth it with this product 😊
This video is superior to others because the gentleman is precise and explains why he does what he does.
Without his thoroughness, one could easily be unaware of crucial steps.
Nicely done Ben!
Cheers, John
PS I had to modify my refill canister nozzle, with a wee slot to allow the butane entry into the Thermacell, otherwise the gas could not flow.
How did you add the slot? I can't seem to refill mine.
This is the best instruction I have ever seen for refilling Thermacell cartriges.
Excellent guide, especially the refill part! One must use a fine nozzle that depresses the valve!
This is the best video ever, and I appreciate it sooooo much. You are about to save me about $180 a year and I cant thank you enough
For me it's not even about the money but rather the waste involved with these. I thought there has to be a way to make these less wasteful. Thank you!
Same with those propane bottles for camp stoves. They sell refillable versions you can refill from a 20lb tank. Go from $7-8 per bottle to $1 per bottle.
Superb video, Ben. Excellent video as well, both in quality of the video itself/editing and your audio/narration. Thanks for your help 😊
Much appreciated!
Never had one detonate? I mean I’m about to try it so if I’m a few fingers short I’ll send an update but it’s just staggering how you can’t buy just the butane cartridges for them separately. So you end up with hundreds of extra blue patches if you buy their products as intended, if this works continuously it’s the best money saving method for sure
Cool - thx 4 saving money!
Awesome hack, much cheaper to do it this way!
Awesome video!!...thank you!!
Thank you for kind comment!
I thought those canisters contained the chemicals used to repell mosquitos. I never thought they would just contain butane considering their price. Ridiculous.
The price of the canisters has kept me from buying one of these things. But knowing this, I will buy one. And refill it like you did. Thank you!
The pads that they burn have the chemicals!
The blue pads imitate dragonfly pheromones, dragonflies being a natural predator of mosquitos, they fly away to avoid the danger
Tack så mycket!
Hej, followed the instructions to the letter and went even to class ohlsson to buy same gas and screws. All goes as planned until I try to refil It massively leaks on the side and barely fills the tank. Any tips on that?
Måste få tajt passning på flaskans smånipplar, test vilken som passar bäst, vänd upp ner på fyllflaskan så du verkligen fyller rakt ner i thrmacell behållaren! Lycka till.
Now you czn refil the canisters, but where to buy the bleu plates because you neec them also
I will make video how to make them
@@BenNorwaywhen are you going to do it Ben
@@BenNorwayBen, did you ever make this video?
Hittade denna nu, mycket bra video dock lite roligt att du hänvisar till en Philips No:2 skruv när lådan från Clas Ohlson som du visar klart visar att skruvens skalle heter PZ-2 eller i klartext Pozidrive No:2, två olika stjärnmejselspår. 👍👍 Mvh
You should not twist the brass piece any more than you have to to pull it out. It will come straight out. The twisting motion tends to erode the hard plastic & when you push the brass part back in it may not seal as well as it needs to....
There is NO normal thread so nobody understands…
It always amazes me when 2 minutes of information is crammed into a 10 minute video
It’s because you are so smart! Not everyone is like you!
Haha! Welcome to web 2.0 ;) Next step AI generated websites full of needless fluff.
Very useful 2 minutes of information though.
And yet you were able to watch it and learn something for free. Just say thank you and carry on with your life.
I completely disagree with this particular video (but agree in general across TH-cam).
He made this video so perfect for beginners. And I really appreciate the detailed info about what surfaces are important not to scratch, and what the risk is if you do.
.the demos and closeups were also useful. It's just about a perfect video tutorial tbh
Hi Ben For some
Reason I cannot fill the canister have themacell changed something
I put just the valve on the butane gas and cannot get gas to flow
Should be very straightforward. I suggest you put on some gloves to protect your hands and then play around with the injection procedure because if you don’t wiggle it around on the filling tube from your mani bottle, then you quickly have an overpressure inside and excess air will prevent you from filling. So, essentially what you need to do is to try to purge out air while you fill up with liquid.
Just put some tape on a screw a little bit )
Great modification!
What brand butane canister did you use? The ones I have came across in the stores do not have the different size nozzles.
Elico Camp gas
The problem is that the Pads themselves are more expensive then buying the combo making this not more cost effective. 12 Mats are $15 where 30 with canisters are $39 so roughly the same but you get the fuel too.
Do you have and use a thermocell? I ask because I always have so many blue pads left over when my butane is gone (for a number of reasons that I could explain if you're interested 😂)
So if you don't already have one, you might be surprised how much faster the butane goes than the blue pads, making the ability to refill still cost effective and helpful to extend the time between buying refills.
Does anyone have any ideas on how to reactivate the platelets themselves? Which liquid in which concentration?
@@sirkasper861 just look for permethrin concentrate to “recharge” the pads.