hello and thanks for your video. As for me I have an issue with this printer that is always adding large margins to all document, so the impression are always partial. Do you know how to solve this or reset the printer to constructor settings?
Gracias por el tip amigo en verdad soy muy feliz no se como agradecerte en verdad me funciono tu video y lo mejor de todo el firmware fue el correcto anduve buscando por todas partes y tu video fue la solucion exacta muchas muchas muchas gracias saludos
thank you for the good article. I have done all the steps almost one year ago and everything went fine. now when i replaced the cartridges with compatible ones from the same brand, I faced the same issue. so, I followed the same steps again. but the problems did not resolve. after installing the old firmware, the printer initializes as it should but the message "supply problem" persists. the message "unauthorized ....." doesn't appear. I am not sure what the solution could be!!! any help???
Make sure that did you install the right number of toner cartridge. Sometimes local Chinese toners also may not detectable. So insert old toners and check the printer status.
Hi, i managed to download the firmware on windows machine, old firmware 20200612 but when i connect the USB to my machine, it shows the smile emojo but '' it does not show the ''Progamming''. basically its not updating the firmware. I checked the firmware on the printer its the latest one still, 20201021. i would appreciate your advice
Try to turn off the printer's WIFI. Then turn the printer off. Then turn the printer ON. Next, try to install the firmware again, with the WIFI (blue button) off. Only turn the wifi on AFTER updating the firmware. It worked for me.
Hi, I just followed this video and downloaded the firmware, but I am still getting the supply problem. I already installed the correct number of cartridges, and my cartridge is from the same brand it was before too! Could you please help me? Thank you.
I downloaded the downgrade firmware and send as shown but the printer is not responding to the programme.im using USB cable for it on my desktop PC is there anything else I need to do to make it work? The cartridge policy and protection was set to off.
Hi, I have a HP M182nw and the error that comes out is error code 57.0i, how can I fix it when the printer does not comes with a FAN to change. Please help me to fix it. Best Regards.
I have a M452 printer and it will not print black on the supply page. I have exchange the toner with another toner and no black print. It will print the black arrow on the cleaning page but it will not print any text on the configuration page, supply page or any other internal reports. I have also updated the firmware. Any ideals on how to fix this?
I don't have the specific MFP M181fw application on my PC but only the HP Smart App and I cannot find the settings that you show in there. How do I do?
You can download the app from google.. www.google.com/url?sa=t&source=web&rct=j&url=support.hp.com/us-en/drivers/selfservice/hp-color-laserjet-pro-m180-m181-multifunction-printer-series/14135030/model/14142485&ved=2ahUKEwirq7KOiqLwAhVUoVwKHTuNAYcQFjAAegQIBhAC&usg=AOvVaw3jrGPNzm-WwhsjMIf6z5hN
Hi, i have done all like that but still it is showing error as 59.C0 error, i only change the black cartridge which i purchased original from Hp from online
Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears.
@@BilalKhalid I inserted one by one and checked still it is showing same error, Now i have ordered HP toner from HP website itself, But i don't know whether it is toner problem or printer problem how to find out
"NOTE: HP Toolbox is no longer available for download from HP. However, if you are using printing software that was installed prior to 2018, open Toolbox from the Tools section of your printing software or from the preferences tab in the printer driver." I need your help with that note
my black toner is compatible one, other one are same, other color are printing. but black one is not working well, printing is not well, it is not dark, ples help me
i cant get the downgraded firmware to download, i could only get the firmware of 21102020 which is the update causing the problem, how do i go about the downgrade
Thank you. The problem first happened with me 6 months ago, and this solution fixed. Now it came back with error 11. I found the firmware version 20200612 is already installed. I did the same fix, and the supply problem still persists . Is there a way to solve this ? Is HP forcing it somehow ?
Check the firmware version first from tool box, either its june 2020 or december 2020. If its june 2020 then no need to downgrade it. Second your printer should be connected with computer before you start the process
Hi, i managed to download the firmware on windows machine, old firmware 20200612 but when i connect the USB to my machine, it shows the smile emojo but '' it does not show the ''Progamming''. basically its not updating the firmware. I checked the firmware on the printer its the latest one still, 20201021. i would appreciate your advice
Hola Descargué el archivo y lo instalé pero no me funciona la impresora. Me dice consumibles no compatibles porque no son marca HP. Hay alguna cosa mas que pueda hacer? Quizá algo con el chip? o sabe como podría rellenar el polvo de un cartucho con el que no funciona? Muchas gracias. Mónica
Tuve éxito cuando apagué el butón del wifi, (butón azul de la pantalla) después apagué la impressora. Encendi la impressora novamente, hice la atualizacion del firmware (aún con el butón del wifi apagado) y solo después volví a encender el wifi. Si revolve su problema, avisa a los otros usuarios.
Its working perfectly with me, i just tried. Might be your computer have antivirus issue, Disbale any antivirus your pc has and then try again. Hopefully, it’ll work
To download the firmware click on the link below
www.mediafire.com/file/fb07kvf81jf8hcj/HP_LaserJet_M181fw_Downgrade_link.exe/file
Worked superbly. Techs make sure that the Printer is connected to your Laptop through the IP Address not "WSD"
Thank you kindly from 2023. Worked first time :)
Glad it helped
Sono riuscito a risolvere il problema. Grazie mille per la spiegazione chiara e precisa. Complimenti.
Sei il benvenuto, signore
Finally someone with the right drivers! Thanks a lot!
Our pleasure!
hello and thanks for your video. As for me I have an issue with this printer that is always adding large margins to all document, so the impression are always partial. Do you know how to solve this or reset the printer to constructor settings?
Me ajudou muito, minha impressora voltou a funcionar. Muito obrigada ❤️
Você é muito bem-vindo
Thanks a lot. Working perfectly - Problem solved.
Gracias por el tip amigo en verdad soy muy feliz no se como agradecerte en verdad me funciono tu video y lo mejor de todo el firmware fue el correcto anduve buscando por todas partes y tu video fue la solucion exacta muchas muchas muchas gracias saludos
Bienvenida
Hello sir Do you replace the chip with a new one or use the original chip from the cartridge? Info please
Hi there, I am using a Macbook and am unable to find any firmware version to install. I changed the supply settings, but it hasn't worked.
Works perfectly. Thank you
Glad to hear
thank you, it works very well, we continue with these educational videos,
thank you for the good article. I have done all the steps almost one year ago and everything went fine. now when i replaced the cartridges with compatible ones from the same brand, I faced the same issue. so, I followed the same steps again. but the problems did not resolve. after installing the old firmware, the printer initializes as it should but the message "supply problem" persists. the message "unauthorized ....." doesn't appear.
I am not sure what the solution could be!!! any help???
Make sure that did you install the right number of toner cartridge. Sometimes local Chinese toners also may not detectable. So insert old toners and check the printer status.
I cannot extract the file after download. I Get "No Archived Found" error message.
Download again nd chk the file size
@@BilalKhalid It's 16.7mb
Hi I have the hp color LaserJet pro 400 it’s printing blank after I fixed 59.c0 solenoid, can you help me?
check the points on high voltage board that connect with the toner. These points are not connecting well with the toner.
BIG THANKS
You’re welcome
Thank you very much. It works perfectly now :)
Wc
Thx! Works perfectly!
Hi, i managed to download the firmware on windows machine, old firmware 20200612 but when i connect the USB to my machine, it shows the smile emojo but '' it does not show the ''Progamming''. basically its not updating the firmware. I checked the firmware on the printer its the latest one still, 20201021. i would appreciate your advice
I am having the same problem
Try to turn off the printer's WIFI. Then turn the printer off. Then turn the printer ON. Next, try to install the firmware again, with the WIFI (blue button) off. Only turn the wifi on AFTER updating the firmware. It worked for me.
Hi, can i use this firmware for MFP 183fw ?
Regards
Same question here, pls answer
bilal bhai am not able to resolve this problem bcoz its asking for a passward as you shown in the video when i entered 0000 it not working
Sorry am getting an error 122: The data area passed to a system call is too small, kindly assist
Hi
is this also for HP Color Laser Jet Pro M254nw ?
will this driver work for m182nw?
Hi, I just followed this video and downloaded the firmware, but I am still getting the supply problem. I already installed the correct number of cartridges, and my cartridge is from the same brand it was before too! Could you please help me? Thank you.
Change the brand and check
I downloaded the downgrade firmware and send as shown but the printer is not responding to the programme.im using USB cable for it on my desktop PC is there anything else I need to do to make it work? The cartridge policy and protection was set to off.
Check the connectivity with the computer, or try to connect your printer with another computer. Nothing else to do
Hi, I have a HP M182nw and the error that comes out is error code 57.0i, how can I fix it when the printer does not comes with a FAN to change. Please help me to fix it. Best Regards.
If the toner lights are blinking with that error, then you need to downgrade the firmware
Does anyone still have this firmware installed on their computer, just got a m180nw and I can't find the FW anywhere to download it.
I have a M452 printer and it will not print black on the supply page. I have exchange the toner with another toner and no black print. It will print the black arrow on the cleaning page but it will not print any text on the configuration page, supply page or any other internal reports. I have also updated the firmware. Any ideals on how to fix this?
did you install the original toner
@@BilalKhalid Yes, I have HP toner.
I have try and follow the step. When I run the firmware no change to problems fix in my printer screen. Anything wrong with my step?
Yes, try to change your computer and try again.
Please sir will this work file work on M180 ??
Thank you so much, the problem is solved.
Glad it helped!
Thanks brother, it worked!!
I don't have the specific MFP M181fw application on my PC but only the HP Smart App and I cannot find the settings that you show in there. How do I do?
You can download the app from google..
www.google.com/url?sa=t&source=web&rct=j&url=support.hp.com/us-en/drivers/selfservice/hp-color-laserjet-pro-m180-m181-multifunction-printer-series/14135030/model/14142485&ved=2ahUKEwirq7KOiqLwAhVUoVwKHTuNAYcQFjAAegQIBhAC&usg=AOvVaw3jrGPNzm-WwhsjMIf6z5hN
I already done that firmware update...
But now coming another error indicated cartridges blocked for containing a non hp chip
disable supply protection from settings
Do you have a firmware downgrade for the HP Color Laserjet Pro MFP M180nw. I tried the M181fw and it did not solve the problem.
th-cam.com/video/37CDMoujNo0/w-d-xo.html
You save my life, thanks a lot.
merci tu nous a sauvé
De rien monsieur
Bro I’m getting the issue is
Hp color laser jet m181 error is used or counterfeit supplies in use
Please need your help
this is the issue with your toners. Did you change the toners? What you did exactly ?
Bro do you have a older firmware for Hp 5640 All in one Printer?
Sorry I dont have
@@BilalKhalid ok mate. Thanks for the reply
Hi, i have done all like that but still it is showing error as 59.C0 error, i only change the black cartridge which i purchased original from Hp from online
Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears.
@@BilalKhalid I removed all the toner and start up now it is showing as Install Supplies
ok insert toner again and check
@@BilalKhalid even i removed the chip from old toner and installed in new toner but it is showing as black cartridge is low
@@BilalKhalid I inserted one by one and checked still it is showing same error, Now i have ordered HP toner from HP website itself, But i don't know whether it is toner problem or printer problem how to find out
"NOTE: HP Toolbox is no longer available for download from HP. However, if you are using printing software that was installed prior to 2018, open Toolbox from the Tools section of your printing software or from the preferences tab in the printer driver." I need your help with that note
What is the issue ecactly?
Thank you. This was perfect
Me resultó perfecto. Saludos desde Chile
Thanks a lot. Helped me a lot
my black toner is compatible one, other one are same, other color are printing. but black one is not working well, printing is not well, it is not dark, ples help me
Change the black toner
i cant get the downgraded firmware to download, i could only get the firmware of 21102020 which is the update causing the problem, how do i go about the downgrade
Link is provided for downgraded firmware in the description
I’m having issue trying to locate the downgrade firmware
Hi sir, Any particular compatible cartridges for 181fw printer
Not yet, Just downgrade the firmware and it'll fix the issue of compatible cartridges.
Thank you for your efforts,please where can I get the downgrade firmware file to use for the downgrade.
In the description
@@BilalKhalid where is the description?
Can you please send the link, thank you.
@@iweorahemekeadebayo8527 description of this video is available right down the video
Thank you. The problem first happened with me 6 months ago, and this solution fixed.
Now it came back with error 11. I found the firmware version 20200612 is already installed.
I did the same fix, and the supply problem still persists .
Is there a way to solve this ? Is HP forcing it somehow ?
Might be there is a problem with the toner actually. Try another set of toners and check.
@@BilalKhalid yes I replaced the toners and they worked, but i am sure they had a lot of ink remaining
@@MrMh996 might be memory chip of toners have an issue
@@BilalKhalid yes I have thought about this. Can't we solve this issue by replacing the memory chip of toners? 😅
@@MrMh996 yes you can replace the chips. Find it in the toner refilling shop
I have a HP Color Laser Jet Pro MFP 283fdw has error message which say supply problem
th-cam.com/video/jDRim6O9Vto/w-d-xo.html
Can you share firmware file for hp laserjet pro M254nw
i am not getting 181 series after downloading firmware
Worked for me. Thank you!
Hi there, im having problems with link you gave, could you please help ?
What is the problem exactly?
when i do this in my printer dont show "programming". What can i do?
Check the firmware version first from tool box, either its june 2020 or december 2020. If its june 2020 then no need to downgrade it. Second your printer should be connected with computer before you start the process
@@BilalKhalid Connected directly with usb or ethernet cable in the router?
@@BilalKhalid Also can i use my printer with only the black color supply?
@@WarThomas46 yes directly with usb cable, and yes you can print only black as well but other 3 color toner should be present in the drawer.
Hi, i managed to download the firmware on windows machine, old firmware 20200612 but when i connect the USB to my machine, it shows the smile emojo but '' it does not show the ''Progamming''. basically its not updating the firmware. I checked the firmware on the printer its the latest one still, 20201021. i would appreciate your advice
Could you do this actually showing the top menu and maybe give us more than a tenth of a second to see what you are doing ? thanks
En serio muchas gracias me funciono!!!! buen video!!
السلام عليكم ، كيف يمكنني نسخ الورقة من جهتين على طابعة recto verso hp m181fw
Is there duplex in the printer?
@@BilalKhalid لا اعرف المهم لدي نفس الطابعة التي عندك ، وأريد ان انسخ الورقة من الجهتين ، هل يمكنك مساعدتي
Muitas Gracias - THANKS THANKS THANKS
Sir mera printer firmware k installlation k bad error nahi de raha, tu kiya me cartridge protection aur authorisation ko off karo
Nai zarorat nahi hay, agar koi error nai to use it as it is.
@@BilalKhalid thankyou sir
Hola
Descargué el archivo y lo instalé pero no me funciona la impresora. Me dice consumibles no compatibles porque no son marca HP. Hay alguna cosa mas que pueda hacer?
Quizá algo con el chip? o sabe como podría rellenar el polvo de un cartucho con el que no funciona?
Muchas gracias.
Mónica
Tuve éxito cuando apagué el butón del wifi, (butón azul de la pantalla) después apagué la impressora. Encendi la impressora novamente, hice la atualizacion del firmware (aún con el butón del wifi apagado) y solo después volví a encender el wifi. Si revolve su problema, avisa a los otros usuarios.
Pero antes de todo esso, hay que cambiar la POLITICA DE SUPRIMIENTOS, hay desativala en las configuraciones.
Tips for Mac?
Thank you. I am trying to opening the rar file but I get a message back saying it is either in an unknown format or is damaged. Please help
Ok let me check
Its working perfectly with me, i just tried. Might be your computer have antivirus issue, Disbale any antivirus your pc has and then try again. Hopefully, it’ll work
Is there a file for a Color LaserJet Pro MFP M182nw Printer?
Yes,
hi cant get the link for downloading the farmwire
check in description
What about HP Color LaserJet Pro MFP M183fw Printer Supply Error?
Very soon will make a video on MFP M183fw
정말 고마워~ 업데이트 잘 되네요
Hello, please kindly send me the link to downgrade file. Thanks
www.mediafire.com/file/fb07kvf81jf8hcj/HP_LaserJet_M181fw_Downgrade_link.exe/file
There is a downgrade for 182 printer?
yeah
Thanks, can you tell me how or where i could find these downgrade?
obrigado amigo. salvou meu dia
Thanks alot brother.. ❤
hello pls
How to Fix HP Color LaserJet Pro MFP M183fw Printer Supply Error
hi sir, how to fix HP Color LaserJet Pro MFP M181fw Printer Supply
Thanks it worked
WORK FINE !!!!! 👍👍👍👍👍👍🥇🥇🥇🥇🥇🥇
Sir incompatible supplies message ko kya karna chahiye solutions dijiyena
downgrade kare firmware.link description mei hay
@@BilalKhalid The firmware.link is invalid, kindly provide the new link
@@GovernorReservation
www.mediafire.com/file/fb07kvf81jf8hcj/HP_LaserJet_M181fw_Downgrade_link.exe/file
@@GovernorReservation www.mediafire.com/file/fb07kvf81jf8hcj/HP_LaserJet_M181fw_Downgrade_link.exe/file
Color is not showing only black color showing and print is also not coming
Is it showing any error?
How to download update firmware
Check the link in description
salut jaimerais aussi avoir 283FDW
Ok I will upload it soon
@@BilalKhalid ok bro thanks
THANKS - DON'T KNOW HOW TO APPRICIATE
Always welcome
tenes para la 182
yes
@@BilalKhalid será q me lo podrías pasar el archivo
Your short link is incredibly dodgy and links to scam websites
I will update the link soon,
mega.nz/file/HvpQTDRR#_tBpWRUWTtT4OjdpDavy_zp9IwdqWo9Hh2rUVvwMNgk
AQUI TENEIS LA SOLUCION @t
Está corrompido!
Take the damn mask off when doing videos! It's hard to hear you.
Thanks a lot. Working perfectly - Problem solved.