You do not need two controllers. You can play with a controller and keyboard and mouse. Follow these steps and they will get you there but if you are having trouble with movement just go to edit keys and buttons and plug in your buttons for your keyboard, and no this will not mess up the buttons for your controller. Me and My little brother did this and it worked perfectly fine.
For those having issues getting a single keyboard/mouse+ controller setup to work, enable gamepad, go in a game with both players connected, go to controls, set to default, use the console command in_forceuser 1, change all the keybinds to keyboard from gamepad, enjoy. (worked for me at least)
You set to default by going into controls and clicking default. Its abit of a procedure but do it in a step by step fashion and you should work it out fine.
Thank you so much man. Been wanting to do this for months to play with my bro but the other tutorials seemed like a hassle. Had to pull out two controllers but it still feels better than the Xbox version. Can't thank you enough for the tutorial.
Appreciate that👍 took less then 15min to figure that out. Just bought the game to play on GeForce streaming for co op specifically and realized it had no option now I got it.
Im able to force into user but when I shoot using controller it resets back to one user. I think if you enable steam input you can change it so that you become 2-4th player
I have one issue When I tested it out one controller could make character look up and down but another controller can’t do that. Is there any way to fix that?
I have the same problem as many below, I put the commands and then It works for while, but after the control and the keyboard control de the same player, Can anyone help me please?
An issue I had was the other screen wouldn't connect. So I pressed ESC., options, keyboard/mouse, and then enabled gamepad. Then I went back and it all worked. Edit: For some reason the keyboard controlled player wouldn't move. Eventually I changed something, maybe I turned off and on the switch joysticks setting, turn off click done, settings again and turned back on. Then it let me connect another controller and it worked fine.
for anyone who have in_forceuser 1 change back to in_forcuse 0 whenever go to Steam big picture under game management controll option make sure to "forced off" steam input per game setting
Please help : For some reason the mod will work for like 10 seconds then it will collapse both controller and m+k back to just one screen... So i go back into console command, then input the "in_forceuser 1" it works for another 10 seconds and then back to both controller and m+k on onescreen. Tried and tried to get it to work to no avail
When i was really going to play doesn't work, my mouse and keyboard is controlling the same person that the xbox one controller, I put all commands the same way you did in the video but doesn't work
@@Swashed_ In the first time works, but again the same problem come back, its looks like that when I shoot this happening, so I try to change the keybind but the problem still here
Can you please help me I did everything and it worked but the game treats my controller as a joystick and where ever I moved the screen moves as well and it doesn't let me shoot
Yeah its possible that your controller didn't get all the controls to set in automatically. This kind of sucks because you have to go into the controller settings and map each button one by one manually.
This works but my player two can’t move the x and y axis up and down to look only side to side any ideas to fix it without having to download a bunch of mods ? Thank you
I tried to download the workshop mods, but when I click on workshop, it just says, "sorry, there was an error communicating with the network. Please try again later."
Thank you ao much! This worked like a charm! Only problwm I have ia the xbox control sticks switched. I tried changing options in the aetting but didnt fix it xD
Can you help me? I did all of the steps but whenever I shoot and jump using the xbox controller, both keyboard and gamepad switches to player 1 all of a sudden.
I cant get my controller to connect, but i got my mouse and keyboard to switch to the other screen like you mentioned in the video. Any suggestions to fix this?
nothing n_forceuser 1 ends up going to n_forceuser 0 I've done everything basically that oriented more every time I press the keyboard and mouse turning ending a so with player 1 and player2 without if n_forceuser 1 doesn't change if it would be good if someone knows something to breaking this helps not only me but many others... so far no one wants to help anyone who has the same problem as me.
For everyone having this issue, I think the solution is that your button bindings are still showing up for the other user's controls and you'd have to (unfortunately) go into control settings and map each button manually and individually before getting to use splitscreen.
another same, any updates? lol once we hit any of the "x a o y" buttons it controls one player, even after putting the commands in multiple times and refixing the issue, then it breaking the same way.
sadly this is not working i wanted to play a share screen or splitscreen game from steam with my girlfriend and since i already had this game i wanted to try this method but even if i used the commands exactly how you did and said in the video we both have control only on player 1 on controller and mnk
got everything working just one tiny problem that kinda sucks in a way..... whenever my controller disconnects then all my keybinds for my keyboard and mouse just resets and clears itself... so i would have to reassign them everytime it disconnects which is a problem but not major. Any solutions ?
These are the commands to make the game work locally in split-screen with both a controller and keyboard. The issue is that when you press a button on the controller, both the keyboard and controller revert to controlling the same player. SOLUTION! Go to the following game folder "C:\Steam\steamapps\common\Left 4 Dead 2\left4dead2\cfg," make a copy of a .cfg file, rename it to "splitscreen.cfg," and in this new file, insert the following code: alias loop_config "sv_cheats 1; in_forceuser 1; wait 1; loop_config" loop_config Open the game and execute the command "exec splitscreen.cfg." This way, it will be possible for one player to play with the keyboard and the other with the controller. --- Esses são os comandos para fazer o jogo funcionar localmente splitscreen com controle e teclado. O problema é que quando clica em algum botão do controle, o teclado e o controle voltam a controlar o mesmo player. SOLUÇÃO! vá até a seguinte pasta do jogo "C:\Steam\steamapps\common\Left 4 Dead 2\left4dead2\cfg", faça uma cópia de um arquivo .cfg, renomeie para "splitscreen.cfg", nesse novo arquivo coloque o seguinte código: alias loop_config "sv_cheats 1; in_forceuser 1; wait 1; loop_config" loop_config Abra o jogo e execute o comando "exec splitscreen.cfg". Dessa forma será possivel que um player jogue com o teclado e o outro com o controle.
It’s a bit more complicated. You’d have to load the map with commands. 1. ss_map mapname Then load in player two with commands 2. connect_splitscreen localhost 2 I don’t have two controllers so I can’t test this but that shoooould work
@@Swashed_ yeah the split screen work, but the second controller has a problem, on the first controller it's fine, I can point the camera up and down right and left, and can move freely... while in the second controller when I want to move using the left analog it turns the camera and can only aim to the right and left, then on the right analog it's even to move. I've used the same controller on both (xbox 360 controller)
@@Frederick27 I happen to know that xbox 360 controller is actually the easiest to work with. There is a program called x360ce (www.x360ce.com/) that gives you A LOT of control for how your controller should work in the game. It works with other controllers too but if you have xbox 360 controller you install this program and it crates like a config file you drop into your game folder and it makes everything work like magic
Hi, I have been playing Left 4 Dead 2 with my sibling. I have already played Campaign maps, and now playing Custom maps. But, still now, I couln't solve a problem. While playing different maps, I see that the brightness of Player 2 is not same as Player 1. On daylight maps, the brightness of Player 2 becomes overbright than Player 1. Whereas, in dark maps, the brightness of Player 2 becomes gradually darker and darker until it becomes impossible to see anything. I really like Left 4 Dead 2. So, I want to solve this problem. So, do anyone know the solution to this problem? Can it be fixed?
You can force the console to open when you launch the game, then you can use a command to bind a key to open it. In steam under launch settings, add “-console” then start the game. It’ll open a console. Then type (with quotes): bind “~” “toggleconsole” Quit game and open again
Oh man I wish I saw this comment before making my next tutorial video haha. I just made one showing how but not for people with nosteam. For no steam, you need to find where the application (exe file) is, right click on it and click on properties. At the end of the file location (c:/program files/steam/left4dead2.exe) you will just add "-console" to the end of that. It's the same process but it just has a few more steps
Hello, I tried everything and it worked, however theres on simple annoying problem which is whenever i use the direction pad or my square X O triangle pad on my controller, it switches back to in_force 0. Do you know how to fix that?
is there a way for keyboard + mouse play as player 1? i installed a mod which allows you to command bots using chat, but because im player 2 i can't control the bots only player 1 can
Late reply but yes you can, just tried it. Some limitations and quirks: - Player 2 is not able go to the pause menu, it has to be done by player 1. But I assume that the player 1 can adjust the sensitivity settings for the second controller as well in the steam deck settings. - Also the game doesn't stop when you're on the pause menus. - If player 2 is using a PS5 controller and presses the touchpad, it fires the gun of player 1. But yeah for the most part it seems to work just fine. Definitely better than playing the 360 version split-screen with it's awful 20fps cap.
Nothing works. I did as the video said but either the controller or the pc player is locked and can only look around. I tried remapping stuff but nothing. It's like the game is trying to keep them binded to the same character but be separated at the same time??? I looked at all the replies and tried it all but can't figure this out
I downloaded the workshop add on and enabled console commands but nothing even happened when I booted up a mission. On top of that once I put in connect_splitscreen localhost 2 it ends the mission and says duplicate commands input ending session. Any idea on why its doing that?
Did you start a single player mission and activate Splitscreen after? I’m not sure but it sounds like that’s what happened. If this is the case, you have select coop splitscreen from the main menu/title screen
You do not need two controllers. You can play with a controller and keyboard and mouse. Follow these steps and they will get you there but if you are having trouble with movement just go to edit keys and buttons and plug in your buttons for your keyboard, and no this will not mess up the buttons for your controller. Me and My little brother did this and it worked perfectly fine.
❤❤love u… everybody finna need this comment… glad I didn’t give up
Goat
@@px8 LMAO U HAVING THIS PROBLEM TOO RN BRO I PRAY U AND YUR BOI HAVE A GOOD TIME 🙏🏼
ay you saved my gaming night with my bro, cheers
@ i got chu
For those having issues getting a single keyboard/mouse+ controller setup to work, enable gamepad, go in a game with both players connected, go to controls, set to default, use the console command in_forceuser 1, change all the keybinds to keyboard from gamepad, enjoy. (worked for me at least)
setting to default just leaves everything on blank, what should i do?
@@apuru. been awhile since i used it, but when their blank fill them in with the keyboard, controller should still work
I'm a bit confused. Where do you do "set to default" and "change all the keybinds to keyboard from gamepad"? I apologize for I'm new to this.
You set to default by going into controls and clicking default. Its abit of a procedure but do it in a step by step fashion and you should work it out fine.
@@Greavence420 I see I see. Thanks
You are an American Hero!
Finally got it to work. That steam plug took a bunch of commands out.
Thank You!
I’d say Canadian but that’s technically American still
@@Swashed_ absolutely Sir! I got it ready for the stream tonight. Seriously, this video was clutch.
Thank you so much man. Been wanting to do this for months to play with my bro but the other tutorials seemed like a hassle. Had to pull out two controllers but it still feels better than the Xbox version. Can't thank you enough for the tutorial.
Awesome man have fun playing 😁
Appreciate that👍 took less then 15min to figure that out. Just bought the game to play on GeForce streaming for co op specifically and realized it had no option now I got it.
Awesome dude I’m glad it helped :)
when i shoot with the controler both players come back to the first character (that is supposed to be the keyboard+mouse)
same, cant find a single fix
@@RockLeeTypeBeat have you happen to see a fix?
Doesn’t work. It just switches back to default
This.
@@BreakOutOfYourTranceany solution yet?
It support for 2 controlled
This video will hold a special place in my heart forever.
as soon as controller uses grab command we get put on the same character
Same
2022 and they still haven't released an add on for 4 players :(
:(
Honestly it’s sad 😢
Try nucleus co-op
GUYS!! You need 2 controllers. You can’t do keyboard and controller :(
after making your keyboard the second screen you have to change the controls back to keyboard settings by editing your keybindings. worked for me
@@catatak3582 how do you complete this ?
Im able to force into user but when I shoot using controller it resets back to one user. I think if you enable steam input you can change it so that you become 2-4th player
yes u can play it!! using two controller. Thankss..
I can hook to controller but the second one doesn't move vertical, you know I can fix it ?
u are king dude! lovely information I get from you.
When I type the command in_forseuser 1 it just change the side of the screen it dont make both screen playable
same here wtf
I have one issue
When I tested it out one controller could make character look up and down but another controller can’t do that. Is there any way to fix that?
Try typing "cmd2 +jlook" in console (without the " of course)
thank you so much. they should have just add it on the split screen add on
Yeah I agree!
"in_forceuser 1" only works for a while for me. And then both controller and keyboard eventually uses the same player
same
do you have the solution?
@@agungandriansyah1518 unfortunately i do not
Same. It’s so frustrating
@@jaykenarn6223 i know the solution now, you just have to play the left 4 dead through steam big picture first..
Bro this is way easier than what I was seeing open the console atleast 5 times just to play split screen👍
It’ll work until one of the triggers on my controller is pressed then I control player 1 on keyboard
I have the same problem as many below, I put the commands and then It works for while, but after the control and the keyboard control de the same player, Can anyone help me please?
Thanks for watching! Smash subscribe 💥
th-cam.com/users/Realswashed
CONSOLE COMMANDS MUST BE ENABLED FIRST.
FROM MAIN MENU:
1. OPTIONS
2. KEYBOARD/MOUSE
3. ALLOW DEVELOPER CONSOLE -> ENABLED
An issue I had was the other screen wouldn't connect. So I pressed ESC., options, keyboard/mouse, and then enabled gamepad. Then I went back and it all worked.
Edit:
For some reason the keyboard controlled player wouldn't move. Eventually I changed something, maybe I turned off and on the switch joysticks setting, turn off click done, settings again and turned back on. Then it let me connect another controller and it worked fine.
THANK YOU SO FUCKING MUCH. PC MASTER RACE BITCHES
bro need help
afteri type in_forceuser 1
it work but then after sometime it keep changing back to only controlling the player 1
was this resolved already?
valve literally so insane to make commands in every game but not the option directly lmao
It was a different time :p
thanks!!! first time it's not working but make something in the configs and it's works!!!
thank you bro it worked ❤
for anyone who have in_forceuser 1
change back to in_forcuse 0 whenever
go to Steam big picture under game management
controll option
make sure to "forced off" steam input per game setting
i try it but now the controller wont respond
@@MultiJuanito5 manco no puso pared
my controller wont work now
Very helpful guide! Also, left 4 dead is always fantastic 😀
CLASSIC. No Mercy best map
@@Swashed_ have you played back 4 blood yet?
@@shadzyg he hasn't
Please help : For some reason the mod will work for like 10 seconds then it will collapse both controller and m+k back to just one screen... So i go back into console command, then input the "in_forceuser 1" it works for another 10 seconds and then back to both controller and m+k on onescreen. Tried and tried to get it to work to no avail
Same here! tell me when yyou figure it out please
Having the same issue
You the goat bro I been trying to find a clean guide that gets down to the point on this for ages. Now my girl & can run through hordes
Thanks bro, subbed.
🥳🥳🥳
its very good, but when in my joystick i shoot, the game restart de commands and y control the same screen with the joystick and the keyboard
When i was really going to play doesn't work, my mouse and keyboard is controlling the same person that the xbox one controller, I put all commands the same way you did in the video but doesn't work
in first we can control different persons, but when we start to move or shoot, we go back to control the same person
This sounds really frustrating. Try this command:
joy_remap_player_for_controller1 2
@@Swashed_ In the first time works, but again the same problem come back, its looks like that when I shoot this happening, so I try to change the keybind but the problem still here
@@Swashed_ same with the original comment it works the first time but goes back to controlling 1 player for both controller and keyboard/mouse
can you show how to do dual screen so so every player has a screen for himself?
thank u bro i was trying to play with my dad I appreciate it
Have fun :)
I dont understand why my character cant shoot.I followed step by step but It didnt work.I can only move, cant interact and cant shoot.
well after typing in_forceuser 1 only the mouse is moving and i cannot select the character
same proben
Can you please help me I did everything and it worked but the game treats my controller as a joystick and where ever I moved the screen moves as well and it doesn't let me shoot
Yeah its possible that your controller didn't get all the controls to set in automatically. This kind of sucks because you have to go into the controller settings and map each button one by one manually.
You have to disable steam input with controllers then it works
This works but my player two can’t move the x and y axis up and down to look only side to side any ideas to fix it without having to download a bunch of mods ? Thank you
it works. it took some tinkering but it worked
How?
how did it work? after sometime my keyboards goes back to controlling the player that the controller is controlling
@@myFirstDespair15any solution?
I'm having issues using a Xbox and PS4 controller they seem to be controlling the same player forever no matter what I do, any solutions?
This doesn’t work it’s just switches back after everytime I pick up an item
I got my controllers to work but I can’t shoot with the second controller just move and it won’t reconnect
i need help!! the screen on the right doesn’t go up and down
I can't move both the players
im able to get it to work for about 10 seconds then it goes right back to controlling the same player.
Same
You need 2 controllers
@@Resident_evil_on_top you need 2 controllers
@@NothingSpecialItsJustMe wrong you just need to enable gamepad and put back all the kbm keybinds
@@noob64_0thatsme8 Didn't work
I tried to download the workshop mods, but when I click on workshop, it just says, "sorry, there was an error communicating with the network. Please try again later."
is there a way to make this mod do 4 players? if so what are the commands to do that?
Thank you ao much! This worked like a charm! Only problwm I have ia the xbox control sticks switched. I tried changing options in the aetting but didnt fix it xD
thank you so much I subscribed and like
Woo thanks for the sub 🥳🥳
Can you help me? I did all of the steps but whenever I shoot and jump using the xbox controller, both keyboard and gamepad switches to player 1 all of a sudden.
Is there a way to have the screen split vertical and not horizontal?
I think it’s based on your screen size. Try different resolutions
Thank you, have a nice day
Thanks you too
The Logitech controller can withstand pressures of over 12,000 feet.
Bruh
@@Swashed_ LMAOOO
Easy and helpful, thank you :D
Why it switches back to default???? It works for 20 seconds
I cant get my controller to connect, but i got my mouse and keyboard to switch to the other screen like you mentioned in the video. Any suggestions to fix this?
nothing n_forceuser 1 ends up going to n_forceuser 0 I've done everything basically that oriented more every time I press the keyboard and mouse turning ending a so with player 1 and player2 without if n_forceuser 1 doesn't change if it would be good if someone knows something to breaking this helps not only me but many others... so far no one wants to help anyone who has the same problem as me.
For everyone having this issue, I think the solution is that your button bindings are still showing up for the other user's controls and you'd have to (unfortunately) go into control settings and map each button manually and individually before getting to use splitscreen.
@@Swashed_ dude we go idle then we control the same person we dont want to go idle
Hi, could you fix it?
Hey man! Does it allow LAN?
And how can we play splitscreen on versus mode?
Whenever I press the ~ nothing happens
I pressed the “utility” button and I can’t get to the command section
Once I click buttons on my controller. It controls the same character from my keyboard and mouse. And only 1 character is moving. What can I do
Did you put the commands? Sv_cheat 1 and in_forcuser 1? Those switch which player is controlled by keyboard
@@Swashed_ yes, it works when i load from the start. But whenever i click things from my controller i lose control with the other character
@@Swashed_ same thing
same here... any new updates?
another same, any updates? lol once we hit any of the "x a o y" buttons it controls one player, even after putting the commands in multiple times and refixing the issue, then it breaking the same way.
Doesn’t work, my controllers are both on and none of the controls are working
Thanks Bro you help so much
You're welcome dude I'm happy it helped you!
sadly this is not working
i wanted to play a share screen or splitscreen game from steam with my girlfriend and since i already had this game i wanted to try this method but even if i used the commands exactly how you did and said in the video we both have control only on player 1 on controller and mnk
Same boat homie... Me and the gf kinda sad atm
Same man smh just wanted to play
Same here playin with my girl too
got everything working just one tiny problem that kinda sucks in a way..... whenever my controller disconnects then all my keybinds for my keyboard and mouse just resets and clears itself... so i would have to reassign them everytime it disconnects which is a problem but not major. Any solutions ?
Thanks very useful!!
I tried this but for some reason the mouse and keyboard controls don't work. You can only look but you can't move or interact. What should i do?
Escape > Options > Keyboard/Mouse > Edit Keys/Buttons
Sadly, you're gonna have to map all the keys manually but this does work.
Hope this helped :)
Reminds of when I could only play on the Xbox 360
This is one game I was so bad at 😂 especially split screen, I also trash.
My friend always had ten times more kills than me but we had fun 😁
Does the split screen mod work normally with skin add ons?
These are the commands to make the game work locally in split-screen with both a controller and keyboard. The issue is that when you press a button on the controller, both the keyboard and controller revert to controlling the same player. SOLUTION! Go to the following game folder "C:\Steam\steamapps\common\Left 4 Dead 2\left4dead2\cfg," make a copy of a .cfg file, rename it to "splitscreen.cfg," and in this new file, insert the following code:
alias loop_config "sv_cheats 1; in_forceuser 1; wait 1; loop_config"
loop_config
Open the game and execute the command "exec splitscreen.cfg." This way, it will be possible for one player to play with the keyboard and the other with the controller.
---
Esses são os comandos para fazer o jogo funcionar localmente splitscreen com controle e teclado. O problema é que quando clica em algum botão do controle, o teclado e o controle voltam a controlar o mesmo player. SOLUÇÃO! vá até a seguinte pasta do jogo "C:\Steam\steamapps\common\Left 4 Dead 2\left4dead2\cfg", faça uma cópia de um arquivo .cfg, renomeie para "splitscreen.cfg", nesse novo arquivo coloque o seguinte código:
alias loop_config "sv_cheats 1; in_forceuser 1; wait 1; loop_config"
loop_config
Abra o jogo e execute o comando "exec splitscreen.cfg". Dessa forma será possivel que um player jogue com o teclado e o outro com o controle.
tutorial for controller and controller?
it's work thank you
you are a hero this is the one fix that works
hey, what about controller and controller, I want play with my friends but we both using controller
It’s a bit more complicated. You’d have to load the map with commands.
1. ss_map mapname
Then load in player two with commands
2. connect_splitscreen localhost 2
I don’t have two controllers so I can’t test this but that shoooould work
@@Swashed_ yeah the split screen work, but the second controller has a problem, on the first controller it's fine, I can point the camera up and down right and left, and can move freely... while in the second controller when I want to move using the left analog it turns the camera and can only aim to the right and left, then on the right analog it's even to move. I've used the same controller on both (xbox 360 controller)
@@Frederick27 I happen to know that xbox 360 controller is actually the easiest to work with. There is a program called x360ce (www.x360ce.com/) that gives you A LOT of control for how your controller should work in the game. It works with other controllers too but if you have xbox 360 controller you install this program and it crates like a config file you drop into your game folder and it makes everything work like magic
HOW DO I START PLAYING AS THE OTHER PLAYER, THE CONTROLLER LETS ME MOVE THE THE MOUSE AND KEYBOARD WONT LET ME CHOSE SOMEONE JUST SHOWS IDLE
For some reason I can only use a wireless controller if I use my keyboard and mouse
this doesnt work it just resets back after 10 seconds
Guys how can we play 4 players local split screen?is it possible?Because the video is for 2 players only
bro u can play splitscreen with another people, using VPN and host *~*
i need help, my problem is now that i cant do anything with m&k i need 2 controllers to play how can i fix it
Hi, I have been playing Left 4 Dead 2 with my sibling. I have already played Campaign maps, and now playing Custom maps. But, still now, I couln't solve a problem. While playing different maps, I see that the brightness of Player 2 is not same as Player 1. On daylight maps, the brightness of Player 2 becomes overbright than Player 1. Whereas, in dark maps, the brightness of Player 2 becomes gradually darker and darker until it becomes impossible to see anything. I really like Left 4 Dead 2. So, I want to solve this problem.
So, do anyone know the solution to this problem? Can it be fixed?
When i press ~ the console wont open even when the "allow developer console" is enabled , how can i change the key bind to open the console ?
You can force the console to open when you launch the game, then you can use a command to bind a key to open it.
In steam under launch settings, add “-console” then start the game. It’ll open a console. Then type (with quotes):
bind “~” “toggleconsole”
Quit game and open again
@@Swashed_ how to force the console to open ? *PS: my game is nosteam
Oh man I wish I saw this comment before making my next tutorial video haha. I just made one showing how but not for people with nosteam. For no steam, you need to find where the application (exe file) is, right click on it and click on properties. At the end of the file location (c:/program files/steam/left4dead2.exe) you will just add "-console" to the end of that. It's the same process but it just has a few more steps
@@Swashed_ thank you 🥰
THANK YOU SO MUCH
Thank YOU for watching! 😀
so the commands work but only one person can control the movement
The mod works btw i prolly shoulda comment that
then it clearly didn't work
@@captainflowers748 wOw rEaLlY?
@@DexGen2002 though I very wish co-op was a thing on the PC, games that has co-op on the console should also be on the PC one by default
On my ps4 controller anytime I did anything the mouse and keyboard took over again
only says 0 for both and it still did nothing
So how does this affect performance? I wanted to try this on a steam deck lol
I’m pretty sure steam deck can handle split screen l4d2 :p
For some reason why game just closes after playing 5 minutes with the mod can anyone help?
Hello, I tried everything and it worked, however theres on simple annoying problem which is whenever i use the direction pad or my square X O triangle pad on my controller, it switches back to in_force 0. Do you know how to fix that?
Did you find a fix
me work once but i cant remeber how i do that
same
yeah this is the problem with me
It works for me but i don't know why when the gamepad player shoots it all resets :(
same problem
is there a way for keyboard + mouse play as player 1?
i installed a mod which allows you to command bots using chat, but because im player 2 i can't control the bots only player 1 can
can you change controls of the gamepad and not let it interfere with the keyboard's?
Hey can i get some help with this? Its working but the game only lets me look left and right and not up and down.
amazing, can you do this on the steam deck?
Late reply but yes you can, just tried it. Some limitations and quirks:
- Player 2 is not able go to the pause menu, it has to be done by player 1. But I assume that the player 1 can adjust the sensitivity settings for the second controller as well in the steam deck settings.
- Also the game doesn't stop when you're on the pause menus.
- If player 2 is using a PS5 controller and presses the touchpad, it fires the gun of player 1.
But yeah for the most part it seems to work just fine. Definitely better than playing the 360 version split-screen with it's awful 20fps cap.
Thank u so much 😎can u make a tutorial for left for dead 1 as well for split screen on pc ?
Do yk why it won't let me look up or down? When connected to Bluetooth
Yo this is sick! ALso I reccomend connecting your pc to a tV and playing on 2 controllers on a couch( I did that and it was hella fun)
Yeahhh couch coop is the bomb
Nothing works. I did as the video said but either the controller or the pc player is locked and can only look around. I tried remapping stuff but nothing. It's like the game is trying to keep them binded to the same character but be separated at the same time??? I looked at all the replies and tried it all but can't figure this out
Got the same issue over here bud
I wish there was a way to select our characters :(
You can change characters
I downloaded the workshop add on and enabled console commands but nothing even happened when I booted up a mission. On top of that once I put in connect_splitscreen localhost 2 it ends the mission and says duplicate commands input ending session. Any idea on why its doing that?
Did you start a single player mission and activate Splitscreen after? I’m not sure but it sounds like that’s what happened. If this is the case, you have select coop splitscreen from the main menu/title screen