How to install glass door hinges

On this video we will show how to install hinges and glass door to SAWO glass front sauna room.
Check also other SAWO sauna room videos:
Assembling SAWO Glass front sauna room ( • SAWO Glass front sauna... )
Electrical wirings ( • Sauna Room Assembly: P... )
More about SAWO Sauna rooms:
www.sawo.com/sa...
Music:
"Point of View" by Nicolai Heidlas
#SAWO #saunarooms #sauna

[@doctorgrafix]

How tight do you tighten the screws? Is there a recommended torque?

[@rashmilulla6823]

Hi thanks a lot for this video ... I have 2 questions , if you could please help me out...
With these hinges , will all the 4 glass doors move to 1 side, keeping the entire window open ? The last door has to be attached to marble (the edging of the window.. So do I have to use 8 hinges (top & bottom) or 4 hinges (centre) ?

[@cwchai2623]

Hi, I have exactly the same type of hinge for my frameless glass door of the common toilet. The top hinge is coming off (the 2 screws can be seen and the door does not close tight). How do I screw them back? do I have to remove the top hinges first?. Thank you

[@KhoirulAnwar-f6g]

Kaca biasa bisa ya bos.. Apa harus tempered

[@pelupelu2a661]

THANK YOU FOR THE UPLOAD

[@pauldubar6014]

Would help to show how to make adjustments

[@cristian82h]

Easy to setup. A little difficult to get used to using.

[@kennydargert8724]

the most important part is HOW TIGHT to make the screws, just says "according to gaskets" thats pretty vague. a few people have asked but no reply.

[@stephenatwood7130]

I have this type of hinge on my shower door. At present it only opens a third of the way. Why is this & how can I fix it?

[@SAWOSauna]

Hi Stephen. Have you checked if your door is misaligned? The weight of the door will sooner put stress on the hinges so that once in a while they need to be tightened or adjusted. Try to reinstall your door, might be some internal part of the hinges is no longer in place.

[@m2simplificationsimply533]

Pls make gap between fixed & door

[@Mfgc24]

Wrong installation.

[@nuqwestr]

Bad, 1st part of video shows all the gaskets on face plate then during install, correctly with half on face plate and other other half on back plate. too bad. It is also apparent that some sort of clear adhesive was used to secure the gaskets in place, but not in video, shame on you.

[@SAWOSauna]

Thank you for your comment. 1st part was showing all the parts of hinges so that people will not miss any pieces. Next is the actual assembly with the door. An adhesive is not needed since the screws will keep the gasket intact.