ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Well ladies and gentlemen the time has come the project accord has finally hit the dyno! we ran into a few issues some of which I didn't get a chance to record but the distributor was badd and the vetec solenoid was badd which caused issues tuning but we got everything worked out motor wise and she drives like a champ!
Tuner: Carlos Tuning
Current Setup:
Bone stock JDM H22a
93 pump gas
1000cc precision injectors
AEM fuel rail
Walbro 255
"eBay" GT3582x (Boostedboi turbo)
BMR (Blueridge Motorsports) TopMount manifold
Stage 5 competition clutch
11lbs Flywheel
Built Motor Setup:
Golden eagle Sleeves 87.5mm bore
Aries 9:0 Pistons
Eagle Rods
ARP head studs and rod bolts
Type s head Crower Springs and retainers
70mm throttle body
KS balance shaft removal kit
Stage 5 competition clutch
Walbro 255
FOLLOW MY NEW INSTAGRAM PAGE WITH PICS AND UPDATES ON THE BUILD: R3TV_
LIKE SHARE & SUBSCRIBE!
![[UNCUT] "เสรีพิศุทธ์" แฉยับ! งัดหลักฐานใหม่ชั้น 14 ได้นอนคุกสมใจแน่!! I คนดังนั่งเคลียร์ I 2 ก.ย.67](http://i.ytimg.com/vi/O1SSg4p9Izs/mqdefault.jpg)
![5 Things That Kill Turbo Engines ⚠️ [WARNING]](/img/n.gif)
Awesome my brother. Who else finds themselves turning their head when the camera's turned sideways?
Thank you! Hoping to have an updated dyno video soon!
Very good numbers. Think I will bring extra dizzy when I go for tuning.
Thanks bro! Yeah I had problems with the dizzy and the vtec soleniod... Besides that everything went perfect motor wise!
Sup Aj
@@UNDERFUNDEDGARAGE nothing much just plugging away at the cb7. How about your lexus.
You get your no vtec and no speedo figured out? Right after my swap (USDM H22 into 1990 accord completed in 2002) I had the same issue, ended up being a small wire harness on the drivers side by the fire wall was unplugged.
Damn... I had got my cb7 h22a built & tuned by blueridge motorsports in hickory. Too bad they closed down now
Such a sick ride. I just picked up 92 Accord Ex as a project car. I’m looking to go H22. How is the engine working for you after all this time?
Thank you much! These cars are fun to work on. I'm still having a few issues with the fully built engine but that's expected. Overall you can't beat an H22 in a CB7. Go for it!
@@R3TV how long did it last bone stock under boost?
Honda TH-cam builders unite!!
Yes sir! Love your channel man I watch all the time!
You need a better exhaust. That thing sounds like every eBay d series on the road. I went with vibrant through and through
This is a vibrant muffler and 3 “ resonator
Love it bro! Can't wait almost want to run the same setup
Wow!! That's on a stock bottom end?
Yeah it was bone stock from head to oil pan! I was pretty surprised too!
@@R3TV how long did it last ?
@@DG-gr7qf only a few months because my oil pump went out and spun a bearing. The rest of the motor was super healthy when I inspected it.
@@R3TV that’s cool nice build
Woohoo! You did it! Man, you are so close to 1000 subscribers. I want you to be able to make some cash! What is your total watch hours over the past year?
Wassup man!!
I can't believe I finally did it man! I'm at like 6000 hours over the last year I just need about 100 more subscribers to get me there!
@@R3TV You can do it bud.
Not bad numbers for the setup, mine made 460hp on the gate with a similar setup
Bro I just checked out your channel... please make some more videos of the accord! That thing is sick!
@@R3TV I will get some more video. My car had a fuel problem on the dyno and melted the pistons. Waiting on my block now, should be back in a few weeks
What is the name of the turbo that you can find on eBay like the boostedboiz one ?
Is it any name brand gt3582x ?
I went with the CX racing Brand. Honestly have to complaints at all.. Not sure what the prices are now but I paid $450 shipped for mine
I have an h swapped EJ1, picking up a turbo kit this weekend. Got a 60mm turbo on the way with a 38mm waste gate.
First time going turbo so my question is does the dyno show bhp or whp? I know I got 220whp N/A rn but dont know if the dyno will show whp or bhp
Nice!!
The DYNO will show you Whatever power you're making to the wheels. Bhp is usually what you make to the crank and some if the power is lost before it actually "makes it to the wheels". Most bone stock h series are in the 300-400whp range when you through a turbo kit on with a good tune.
So in this video no cams or anything? I just stock block, stock head? I’m getting very close to throwing my turbo and everything on my prelude and just getting an idea about what I’m looking at
100% Bone stock H22a engine. Only upgrade was 1000cc injectors and walbro 255 fuel pump. I wouldn't go any higher than 300-350whp if you're gonna keep it stock but its definitely worth it
Yeah I wasn’t really planning on going crazy. I’m still up in the air about building my head or not. I would like to but on a budget since I’m saving a for a house right now. Appreciate the reply tho man. Thank you
i mean it's a closed deck h22a, so it isn't that surprising that it holds 400hp, but other open deck models aren't as good
Was this tune on the current setup listed in the description? Just trying to get a ball park on where my numbers can potentially be with my build after tune. My setup is a jdm h23a bluetop precision 1000cc injectors aem fuel rain and fpr. Walboro 255 fuel pump. Skunk2 intake manifold and 70mm throttle body. Skunk2 pro1 cams and cam gears supertech valve train and just a turbo setup pieced together with some ebay parts. Just need to get it all together
Yes this tune was on the bone stock h22a with 1000cc injectors and 255 fuel pump. I ended with about 350-360 on 11psi. So you should definitely be able to hit that no problem with your setup! What manifold and turbo are you running? That's gonna have the most affect.
@@R3TV Ebay cast manifold and a godspeed turbo that's is supposedly comparable to a gt35r
How are those 1000cc injectors holding up im tryna turbo my H22 atm
How’s the turbo holding up n also you have the link to it ?
So far so good not many miles on it yet but I'm sure its gonna last a while...
Here's the link: www.ebay.com/itm/GTX3582R-V-Band-82-Turbo-Dual-Ball-bearing-GTX35R-Anti-Surge-CNC-Wheel-Charger/112988364387?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Just subscribed!!
I got a h22 cb7 on my channel too!!
Damn Carlos tuned my accord too! Haha where you located bro?
He's a good tuner man one of the best around! I live in Ocala bro
@@R3TV I'm on Jacksonville. Hit me up on fb. My name is Joshua Fackler
Records himself with no seat bealt on..😂
How much boost? And also how did you get it to rev all the way to redline with outh the speed sensor working?
That was between 8 to 10 psi running off the wastegate and I was able to rev it out all the way without the speed senor I just couldn't setup 2 step
Ahh ok thanks brother
What size is your charge piping? 2.75?
I'm running 2.5. It works great. I may go a little larger when I upgrade my intercooler set up though
What manifold, bov/wastegate
Blueridge Motorsport Topmount, Tial 38mm wastegate and HKS BOV
If its built it aint stock lmao
Stock block
This motor is 100% stock from head to valve cover except injectors and walbro 255
Stock built bro 😎