The coolant jug is empty way below empty. It’s been 4 years, but it should have been topped up to Max with 50/50 Asian blue and inspected for leaks particularly the heater hose coupler, which is a common place.
Next time you do a belt change on a G they're two holes on the tensioner you stick any sized Allen key through and it locks the tensioner so you don't have hold it with a ratchet.
yeah man and one of the pcv hoses and had to take off the throttle bodies! a ton of other stuff! the only mistake i made is i lost one of my maf sensor screws in the engine bay.... im gonna see if my mechanic can go from under and try to find it, or ill just get a new one -___-
Dude the shit is easy, yea you take the intakes/throttle bodies off but that’s not hard at all. You want hard, try a FWD car where the actual intake manifold has to come off. 30 minutes to 1 hour job. A G is like the easiest car to work on.
Possible drawback would be water getting into something it shouldn’t like a distributor but they don’t have those and most of the time you’re fine. I’d say take it off for heat reasons as all it really does is trap heat
I love the squeaking brakes. Seems all these cars do that in reverse. So, where's the engine splash pan? I put these TBW aluminum pans on both my 350Z and my Q60S. Makes oil and filter changes a LOT quicker.
Yep, the Infiniti 4 piston caliper brakes with original Infiniti pads. Car has 10500 miles on it and has squeaked since new. My 350Z did the same thing. In the Z, when I replaced the pads with after market ones the problem went away completely. I have heard that beveling the edges of the pads helps. It only does this when going very slow and braking lightly. At normal speeds and when stopping normally, it is a non issue.
Excuse Me Miss it’s a timing chain, and it should last the life of the vehicle, unless you have a rattle from the timing area then the guides may need servicing. That only occurs to people who drive them too hard.
Hi I have a 2010 Infiniti G37 what is the kind of oil should I be using...and what is the best kind of gas to use I’ve been using 87 since I’ve had this car
1. You need to use a new oem nussan drain plug gusket each time you change oil 2. The delco belt is crap, and the original belt did not have any visual symptoms for replacement 3. What shit oil did you put in there? For this VQ engine you need to use high quality full synthetic oil preferebly with esters 4. Drain bolt needs be tightened with a torque wrench What a f..ng horrid service!!! That is why i do maintenance myself, rather trust shitheads mechanics
Eugene Tooms I used to work at Toyota of Kirkland and they actually put in full synthetic oil but it ALWAYS depends on management whether cheap shit or good shit
That oil is called CAM2 Super Pro Max 5W-30 Synthetic Blend Motor Oil, what is unique about it and I haven't been able to find it in other oils is that it has something called preignition protection. Since this is a year old I suspect you may have already know what it is. It's seems the G37 suffers from a standing slow start on the gas engine knocking. I search for over a year trying to figure it out and some guy on another vid figured it out. I thought I had an issue with my gas but I use 93 Octane all the time. Since I drive my car like Granpa owns it when I come to a light and start on the gas slowly I get this pre ignition knocking. It's annoying as hell. If I give the gas peddle a little more juice I never hear it. I suspect that the syntehic oil with Esters in it combats the Preignition knocking. But I could never pinpoint the noise related to when I started using Valvoline synthetic.
Could a non-mechanic do this type of job? Serpentine belt replacement on 2009 EX35 and I plan cleaning my throttle bodies.... Anytips.? SO, there is no AC belt for this 2009 EX35 ... right? Could you make a video about throttle bodies for infiniti VQ35HR engines. .. . Thank you ... oh And Happy Turkey Day too btw :)
Gm Mg yes a newbie can do it, just draw out the routing or take a pic, yes it has the 3.5 hr motor which converted to a single belt set up. The tensioner is a 3/8 drive
Gm Mg yes I can make a throttle cleaning video, but mine would be slightly different b/c I have a cold air intake, but if it will help you out I can do it by tuesday. A tip for the throttle job would be remember to plug all lines and connectors back up or the car may not start or may piss coolant.😅
Deez Nuts yes either, mass air flow is going bad or barometer sensor. A temporary fix will be to give it gas as you start it up👍 I upgraded to a cold air intake and that problem never happened again.
@@Tj5XX only reliable as long as the owner took care of the car. You run the risk of having the car break down on you if it wasn’t properly maintained.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Nice to see a G owner such as my self make these type of vids to show maintenance is very important just as modding nice work bro !!!
BRIAN DEKLE thanks I promise better videos coming💪
Man I wish I had a lift like that it would make me WANT to do service on my cars not feel like I have too
The coolant jug is empty way below empty. It’s been 4 years, but it should have been topped up to Max with 50/50 Asian blue and inspected for leaks particularly the heater hose coupler, which is a common place.
It's actually green I have a 2008 g35x and it takes green coolant
Next time you do a belt change on a G they're two holes on the tensioner you stick any sized Allen key through and it locks the tensioner so you don't have hold it with a ratchet.
RzVids thanks brother, I knew that. Just rushing
I just did my spark plugs tonight. Much , much harder than I thought it was going to be
Usman Tahir yeah air intakes in the way 😂
yeah man and one of the pcv hoses and had to take off the throttle bodies! a ton of other stuff! the only mistake i made is i lost one of my maf sensor screws in the engine bay.... im gonna see if my mechanic can go from under and try to find it, or ill just get a new one -___-
Dude the shit is easy, yea you take the intakes/throttle bodies off but that’s not hard at all. You want hard, try a FWD car where the actual intake manifold has to come off. 30 minutes to 1 hour job.
A G is like the easiest car to work on.
RzVids Honda is the easiest to me
Any benefit or drawback of driving without the engine splash shield?
Possible drawback would be water getting into something it shouldn’t like a distributor but they don’t have those and most of the time you’re fine. I’d say take it off for heat reasons as all it really does is trap heat
I’m confused, was the purpose of this video instructional or merely designed to give the viewer a headache?
The 2 air filters looked dirty as hell. Why not replacing too?
I like them that way.
Gives it that aggressive look
I love the squeaking brakes. Seems all these cars do that in reverse.
So, where's the engine splash pan? I put these TBW aluminum
pans on both my 350Z and my Q60S. Makes oil and filter changes a LOT
quicker.
archangele1 pan ripped off low life🤣 and yes the sports brakes bbk always squeak😭
My g37 journey brakes don’t squeak
dan428 you must have the baby brakes🤣
Yep, the Infiniti 4 piston caliper brakes with original Infiniti pads. Car has 10500 miles on it and has squeaked since new. My 350Z did the same thing. In the Z, when I replaced the pads with after market ones the problem went away completely. I have heard that beveling the edges of the pads helps. It only does this when going very slow and braking lightly. At normal speeds and when stopping normally, it is a non issue.
archangele1 once hot they are baby quiet 🤫
Hi! I have a 2013 G37 journey, I'm at 80k miles, when is a good time to change the timing belt?
Excuse Me Miss it’s a timing chain, and it should last the life of the vehicle, unless you have a rattle from the timing area then the guides may need servicing. That only occurs to people who drive them too hard.
@@bukklaog3717 oh ok... thank so much!
Your underecarriage looks mint... mine, on my 2010 fx35 look crazy rusty... NYC winter don't help!
I try to keep her up she’s an old girl now.
@@bukklaog3717 you're doing a great job!
Any tips on what to look for when buying Im buying 1 tomorrow need help anyone
Aye uumm… my infiniti m37 makings a whining noise when i hit the gass what could that be?
And it has a burning smell after hittin full throttle
170k miles 2012
Car was not beat on but also wasnt tooken care of for the past couple months it looks like
Hi I have a 2010 Infiniti G37 what is the kind of oil should I be using...and what is the best kind of gas to use I’ve been using 87 since I’ve had this car
Just Browsing 93 and any full synthetic 5w 30
Thank you
Just Browsing bro I hope you didn’t keep using 87
Please tell me you stopped using 87. Your engine has to be knocking by now if you still are 93 is the best option
@@Rsaint17i have a high mileage 2012 m37 and been using regular should i try something different?
What kind of oil is that ??
Hezha Abdullah cam 2
I thought the same thing lol. Looks cheap tho
Hey man. Just checking out your TH-cam from IG. Keep up the good work! Subscribe!
11:05 Is it normal that it squeaks so much ?
It all depends on pad quality ad rotor surface.
1. You need to use a new oem nussan drain plug gusket each time you change oil
2. The delco belt is crap, and the original belt did not have any visual symptoms for replacement
3. What shit oil did you put in there? For this VQ engine you need to use high quality full synthetic oil preferebly with esters
4. Drain bolt needs be tightened with a torque wrench
What a f..ng horrid service!!!
That is why i do maintenance myself, rather trust shitheads mechanics
and beating the battery cable ends on with a wrench. Cringeworthy!
Eugene Tooms I used to work at Toyota of Kirkland and they actually put in full synthetic oil but it ALWAYS depends on management whether cheap shit or good shit
That oil is called CAM2 Super Pro Max 5W-30 Synthetic Blend Motor Oil, what is unique about it and I haven't been able to find it in other oils is that it has something called preignition protection. Since this is a year old I suspect you may have already know what it is. It's seems the G37 suffers from a standing slow start on the gas engine knocking. I search for over a year trying to figure it out and some guy on another vid figured it out. I thought I had an issue with my gas but I use 93 Octane all the time.
Since I drive my car like Granpa owns it when I come to a light and start on the gas slowly I get this pre ignition knocking. It's annoying as hell. If I give the gas peddle a little more juice I never hear it. I suspect that the syntehic oil with Esters in it combats the Preignition knocking. But I could never pinpoint the noise related to when I started using Valvoline synthetic.
what was that thing you were tightening ?
Can you help me locate the fuel filter
In the fuel tank
@@bukklaog3717 just discovered heater core leak. 6-8$ job..any suggestions?
What’s the name of the place and address where u do maintenance to ur car I live in MD too I saw ur tags
DarkNightCacho85 perryhall firestone
DarkNightCacho85 I am the tech 🤣
Do u guys do any other modifications to the cars or just regulars maintenance
DarkNightCacho85 suspension and bolt on performance parts, no tuning or forced induction.
Is this process similar to the 2009 ex35?
and is there an "AC" belt for the 2009 ex35
Gm Mg same process, there is one singular belt, sorry this video doesn’t go in depth to help you.
Could a non-mechanic do this type of job? Serpentine belt replacement on 2009 EX35
and I plan cleaning my throttle bodies.... Anytips.?
SO, there is no AC belt for this 2009 EX35 ... right?
Could you make a video about throttle bodies for infiniti VQ35HR engines. .. .
Thank you ... oh And Happy Turkey Day too btw
:)
Gm Mg yes a newbie can do it, just draw out the routing or take a pic, yes it has the 3.5 hr motor which converted to a single belt set up. The tensioner is a 3/8 drive
How about cleaning the throttle bodies on these bad boys... Do I have to do that IDLE Relearn stuff?
Gm Mg yes I can make a throttle cleaning video, but mine would be slightly different b/c I have a cold air intake, but if it will help you out I can do it by tuesday. A tip for the throttle job would be remember to plug all lines and connectors back up or the car may not start or may piss coolant.😅
How much did all this cost?
Abram Brown cheap, i did it myself
Wasup man I had a question. I got a G37s coupe as well and when i start it sometimes (not cold start) it will shut off. You know what that could be?
Deez Nuts wassup bud?
Deez Nuts yes either, mass air flow is going bad or barometer sensor. A temporary fix will be to give it gas as you start it up👍 I upgraded to a cold air intake and that problem never happened again.
Yeah thats what i usually do is give it some gas. And when i ran the scanner the mass air flow sensor code came up
Deez Nuts try Cleaning it with brake cleaner before you go and replace it
Bukklao G37 alright thanks for the help bro! Had one more question did you have any rubbing issues with your spacers?
Had a little trouble with the serpentine belt routing huh?
Jeffro243 B maybe 🤣
Aye sabaidee, kun lao over here. I have a black g37 coupe. Nice channel.
Lucas Maximus 🇱🇦 hee la but
How many miles you got on the car ?
180k now
So this car is reliable ? I’m looking to buy one for cheap it has 168,000 miles
@@Tj5XX only reliable as long as the owner took care of the car. You run the risk of having the car break down on you if it wasn’t properly maintained.
Hey what kind of exhaust do you have ?
Bryan Dennison a lot of different shit, isr y pipe berk test pipes and deleted mufflers
@@bukklaog3717 thanks brother
Was this video supposed to be instructive or informative in anyway? What a waste?
Tommy Gunns!
Damien Brown he said why is this thing so loud!!
Damn i wanted to see this video but that camera just goes from left to right too much for me making me dizzy 😵😵💫🫨🫨🫨