Love your channel, thanks to you and all your brethren for keeping the lights on! Minor correction, the Forge 6Ah can deliver the same instantaneous output as the High Output 12Ah, but it still only contains 6Ah of energy, it will last about as along as the 6 or 8 Ah packs, but deliver more power especially towards the end of the charge, saw is a great use for it. It is mostly similar to the High Output 6Ah it replaces but with less voltage sag and faster charging, and a little smaller, if you want super long run times from a single battery, and can deal with the weight, the 12Ah High Output is still the way to go until there is a forge version of that.
Appreciate the correction! I totally only noticed after posting that I said "capacity" as opposed to "output". Appreciate the more in-depth explanation very much! Pinned!👊👊🤝
Honestly with a fast charger, I prefer using smaller batteries that will charge in the time I empty the other one. But it really depends on the weight of the tool.
Battery just makes more sense. No fuel to carry around or go bad, instant spin up and lots less noise (so you can actually hear what's going on around you).
I'm glad that our utilities in Western New York are getting more aggressive with tree pruning every year. If trees or branches are going to come down, I'd rather they come down before a storm than after - and reduce the frequency of multi-day outages.
Thanks for your video, Aaron. I really need to check out the high-speed chargers and batteries. The -6 degrees is all yours. Heading to a beach in Costa Rica in the morning for a warm vacation spot.
Our linesman's trucks have isolated PTO-powered hydraulic saws on the booms. they also work with Asplundh, who are able to work in the LOA for primaries.
I have a husquvarna telescopic pole saw and rate it. In very cold weather below about -2 cellcius though it is best to store the 9.5amp batteries somewhere warm overnight if using it right away. Otherwise like the milwaukee the instant high chain speed, low noise and lack of fumes make it better than any gas saw.
A power tool with an extension cord is a poor tool to use on or near power lines. The cord is grounded. A battery tool is isolated from the ground as long as the operator is wearing rubber gloves and/or in a fiberglass bucket.
I own a tree service, and since we’ve switched to ethanol free 90 octane gas in our 2 cycle we’ve had no saw issues. If you don’t use your saw a lot then the premix is great. If you do, just use the ethanol free. Much cheaper and won’t ruin your carb.
3 generation tree guy here. husky is a better saw. good video. you won't find any line guys around here helping out tree guys. called many times months before jobs to schedule line drops.and every time call few days before to confirm. everything good and never show up call back. ohh we don't have time going to have to deal with it WTF. never had any problems like that in 80s 90s. husky t540i is buy far the best battery saw on the market. be safe.
The contractors who do the line work in my area on Long Island, New York do the line clearing as well and if a homeowner has a tree close to the lines they will cut the tree down well past any wires although they leave all the brush at the bottom of the line which makes a huge mess for the home owner although great for people like me who gather firewood since it is free wood
It’s the homeowner’s brush. If they don’t like it or want it then they shouldn’t plant trees under power lines or allow the trees to grow into the lines.
I'm not a lineman but enjoy your educational videos. Having just viewed this video without researching the pole saw, would the rechargeable battery last longer without constantly starting and stopping it when you're trimming one branch right after another? The reason that I'm asking is that I know that my central air conditioning unit draws a lot of current to start the compressor but that drops off after it's running. The electric motor in the saw seems to be similar but on a much smaller scale.
It's a different kind of motor, so the stopping/starting doesn't really affect battery life. The big rush of current you see on a compressor is to get the motor started, but these power tools from the FUEL line are brushless DC motors, meaning they have a little computer that runs them at optimal speed.
So, you are a gardener too. If a tree is causing problems and you cut them, then you are a line worker. But when you do cut them when they are not causing a problem (at that moment) then you are a gardener.
Hey Aaron I'm in South Australia & we use A LOT of ABC & IUC in fire prone areas like the Adelaide Hills,do you use it there in your province?? Also what is that saw rated for kV wise?? Actually I should ask is it rated at all,I mean for accidental contact obviously.🤔
"Minus 6 degrees 😮😮" -- It took me a while. -6C in Canada, but about +21F in US numbers. I'm across the big bay, we didn't have minus(F) yet this winter, but we did hit +23(F) a few days back. Cold enuff for me.
Are your Milwaukee chargers and batteries stored in a heated compartment on your truck? Or is it a cold storage compartment. Maybe you have shown it in a previous video, I apologize if you have. Just curious how well the batteries hold up in the cold weather… will the newer style batteries charge when it’s cold or does the charging lights blink all crazy because the battery is either too cold or too hot. What has your experience been like. Thanks
I bought a similar (lighter-duty) battery pole-saw last month, to prune-down the apple tree. DEFF more convenient and safer than ladders, gas-saw, running power cords out to the (3-tree) orchard, or sawing away with hand pole saw (I don't have Aaron's knack or shoulders). I done a lot with plain battery chainsaws, even felling and lopping 65 foot Spruce weeds.
The current one our crews are using is the Stihl. It's a great saw, no complaints. Finding a battery powered saw that can out power it is something I didn't think we'd ever see!
"Are you a public utility or a private contractor?" Bob/Aaron works for a major power utility in Nova Scotia Canada. "Public?" It seems to be investor-owned but of course regulated by public/government offices.
Hii Bob. I am Jag from G.B.Industries. We are one of the world leading dielectric product manufacturer. Novax was our brand. We would like to contact you in person for further collaboration opportunity. Thank you.
I like the line work videos but the Milwaukee products videos. Ugh I'm sure they work fine and all but it isn't of much interest for me. I'll skip this one I guess.
Yes n no.... I do appreciate the feedback. I try to release a good balance of videos styles that can appeal to everyone. For what it's worth, this video still has lots of instructional information as to what I'm doing around the lines and why. Cheers gentleman! 🤝🍻
Did I mention I am invested in the DeWalt tools? Lol. Just like you I have a number of batteries and ofcourse they are interchangeable. I do not have a chain saw but if I was to get one I'd be looking at get a battery powered one if it would do. Way easier to not deal with gas, 2 stroke oil, choke etc.
We started off with DeWalt, definitely nice tools as well. It would be to make the switch with so much already invested. Appreciate ya being a long time viewer Bert! 👊🤝
![2.35 Horsepower! Milwaukee M18 FUEL Telescoping Pole Saw Video [3013-20]](http://i.ytimg.com/vi/R2HBaFwmTsU/mqdefault.jpg)
Love your channel, thanks to you and all your brethren for keeping the lights on!
Minor correction, the Forge 6Ah can deliver the same instantaneous output as the High Output 12Ah, but it still only contains 6Ah of energy, it will last about as along as the 6 or 8 Ah packs, but deliver more power especially towards the end of the charge, saw is a great use for it. It is mostly similar to the High Output 6Ah it replaces but with less voltage sag and faster charging, and a little smaller, if you want super long run times from a single battery, and can deal with the weight, the 12Ah High Output is still the way to go until there is a forge version of that.
Appreciate the correction! I totally only noticed after posting that I said "capacity" as opposed to "output". Appreciate the more in-depth explanation very much!
Pinned!👊👊🤝
Honestly with a fast charger, I prefer using smaller batteries that will charge in the time I empty the other one. But it really depends on the weight of the tool.
Battery just makes more sense. No fuel to carry around or go bad, instant spin up and lots less noise (so you can actually hear what's going on around you).
I'm glad that our utilities in Western New York are getting more aggressive with tree pruning every year. If trees or branches are going to come down, I'd rather they come down before a storm than after - and reduce the frequency of multi-day outages.
In Australia it is the supply company who has to maintain the trees from the power lines. This is due to the fire hazard.
In California nobody does anything and everything burns to the ground.
I remind customers they own the trees; we are just getting them away from or off of our lines.
Thanks for your video, Aaron. I really need to check out the high-speed chargers and batteries. The -6 degrees is all yours. Heading to a beach in Costa Rica in the morning for a warm vacation spot.
Love Milwaukee
Love all M18 stuff but that pole saw is freaking awesome it's in a class of its own!
Very quick cutting saw and impressive battery life as well. Be safe !
Our linesman's trucks have isolated PTO-powered hydraulic saws on the booms. they also work with Asplundh, who are able to work in the LOA for primaries.
I have a husquvarna telescopic pole saw and rate it. In very cold weather below about -2 cellcius though it is best to store the 9.5amp batteries somewhere warm overnight if using it right away.
Otherwise like the milwaukee the instant high chain speed, low noise and lack of fumes make it better than any gas saw.
I have a chineesium knock off version of that that runs on an extension cord. Works just as good though 😊
A power tool with an extension cord is a poor tool to use on or near power lines. The cord is grounded. A battery tool is isolated from the ground as long as the operator is wearing rubber gloves and/or in a fiberglass bucket.
Always carry an extra battery for ALL your cordless tools
PLUS, have some way to recharge them all in your truck.
!
I use pre mix 50:1 fuel in my gas saws and it stay good for 2 years although it is expensive to buy, it is worth it
I own a tree service, and since we’ve switched to ethanol free 90 octane gas in our 2 cycle we’ve had no saw issues. If you don’t use your saw a lot then the premix is great. If you do, just use the ethanol free. Much cheaper and won’t ruin your carb.
3 generation tree guy here. husky is a better saw. good video. you won't find any line guys around here helping out tree guys. called many times months before jobs to schedule line drops.and every time call few days before to confirm. everything good and never show up call back. ohh we don't have time going to have to deal with it
WTF. never had any problems like that in 80s 90s. husky t540i is buy far the best battery saw on the market. be safe.
Just have to convince my telecom to purchase this now...
Looking for a battery for my Quik-lok pole saw as I bought a tool only set.
The Forge looks like the one! Thanks for posting!
The contractors who do the line work in my area on Long Island, New York do the line clearing as well and if a homeowner has a tree close to the lines they will cut the tree down well past any wires although they leave all the brush at the bottom of the line which makes a huge mess for the home owner although great for people like me who gather firewood since it is free wood
It’s the homeowner’s brush. If they don’t like it or want it then they shouldn’t plant trees under power lines or allow the trees to grow into the lines.
They should do that test to compare Stihl and Milwaukee at -20 to -30 and see how long will it take to charge lithium batteries at that temperature
Milwaukee needs to create a m18 powered 40’ extendo stick. My shoulders need a break.
🤣🤣 That's actually an excellent ideA!!!
Good morning
Gotta, say... Woof @ Jake
I'm not a lineman but enjoy your educational videos.
Having just viewed this video without researching the pole saw, would the rechargeable battery last longer without constantly starting and stopping it when you're trimming one branch right after another? The reason that I'm asking is that I know that my central air conditioning unit draws a lot of current to start the compressor but that drops off after it's running. The electric motor in the saw seems to be similar but on a much smaller scale.
It's a different kind of motor, so the stopping/starting doesn't really affect battery life. The big rush of current you see on a compressor is to get the motor started, but these power tools from the FUEL line are brushless DC motors, meaning they have a little computer that runs them at optimal speed.
The 15 minute charge is also known as the coffee break charge.
Good job
So, you are a gardener too. If a tree is causing problems and you cut them, then you are a line worker. But when you do cut them when they are not causing a problem (at that moment) then you are a gardener.
Hey Aaron I'm in South Australia & we use A LOT of ABC & IUC in fire prone areas like the Adelaide Hills,do you use it there in your province?? Also what is that saw rated for kV wise?? Actually I should ask is it rated at all,I mean for accidental contact obviously.🤔
🌲 beauty. we love you canada! 😄
The only downside is a 3 year warranty . I had my shindaiwa over 26 years . Never had a problem with it .
milkwaukee probably had some really dull chains on that gas saw for the demo :D
Minus 6 degrees 😮😮
"Minus 6 degrees 😮😮" -- It took me a while. -6C in Canada, but about +21F in US numbers. I'm across the big bay, we didn't have minus(F) yet this winter, but we did hit +23(F) a few days back. Cold enuff for me.
@@PRR1954 +,23.degrees 🥶🥶 . That is well past the temperature of which i will enjoy. I can take 40degrees any time
What’s freezing cold it was -21f here at 0:730
Are your Milwaukee chargers and batteries stored in a heated compartment on your truck? Or is it a cold storage compartment. Maybe you have shown it in a previous video, I apologize if you have. Just curious how well the batteries hold up in the cold weather… will the newer style batteries charge when it’s cold or does the charging lights blink all crazy because the battery is either too cold or too hot. What has your experience been like. Thanks
Not insulated? Great product though. Be safe brother. Im a Trouble man also here in the states.
Correct - not insulated. Would love it if they come out with one!
Cheers brother!🍻🤝 Be safe !
@@Bobsdecline I worked with a few Canadian boys in Hurricane Sandy back in 2012. Quebec Hydro, BC and Manitoba Hydro. All the best to you also.
Dude, Im buying that thing and I don't even do line work.
That's how I feel about their plumbing tools lol!
I bought a similar (lighter-duty) battery pole-saw last month, to prune-down the apple tree. DEFF more convenient and safer than ladders, gas-saw, running power cords out to the (3-tree) orchard, or sawing away with hand pole saw (I don't have Aaron's knack or shoulders). I done a lot with plain battery chainsaws, even felling and lopping 65 foot Spruce weeds.
👍👊‼️
Did this Milwaukee Forge Charger come in a Packout Box??
This one's a demo, I don't think they normally do
Thanks for the reply. Stay safe!!
What brand of telescopic saw are you using ? Not the Milwaukee
The current one our crews are using is the Stihl. It's a great saw, no complaints. Finding a battery powered saw that can out power it is something I didn't think we'd ever see!
Thanks bro 👍
Are you a public utility or a private contractor?
"Are you a public utility or a private contractor?" Bob/Aaron works for a major power utility in Nova Scotia Canada. "Public?" It seems to be investor-owned but of course regulated by public/government offices.
сколько человек у вас в бригаде?
Goods
Hii Bob. I am Jag from G.B.Industries. We are one of the world leading dielectric product manufacturer. Novax was our brand. We would like to contact you in person for further collaboration opportunity. Thank you.
I hate 2 stroke engines with a passion.
I like the line work videos but the Milwaukee products videos. Ugh I'm sure they work fine and all but it isn't of much interest for me. I'll skip this one I guess.
Yes n no.... I do appreciate the feedback. I try to release a good balance of videos styles that can appeal to everyone.
For what it's worth, this video still has lots of instructional information as to what I'm doing around the lines and why.
Cheers gentleman! 🤝🍻
@Bobsdecline OK I'll give it a watch. Thank you.
Did I mention I am invested in the DeWalt tools? Lol. Just like you I have a number of batteries and ofcourse they are interchangeable.
I do not have a chain saw but if I was to get one I'd be looking at get a battery powered one if it would do. Way easier to not deal with gas, 2 stroke oil, choke etc.
We started off with DeWalt, definitely nice tools as well. It would be to make the switch with so much already invested. Appreciate ya being a long time viewer Bert! 👊🤝