This was not a profitable flip, but it did cover my time. Here are my numbers: Costs Price - $7.41 Legs - $35 Veneer - $75 Liners - $10 Supplies - $50 Invested 12+ hours Sold for $700 Gross profit $522.59
@@ivylane-home thank you for your reply. My father had an "antique" store in the 80's, he refinished furniture too but preferred stains. He also enjoyed refinishing boats and motor-home interiors (wood and upholstery) .
Hi there great job 👍the black rubber bloks you used when you sand in your hans what do the calls? I haved never ever seen them before and I just think that they are brilliant because I noticed you where meshing up whit the right highness to sand with the black Bloks 👍💪 thanks for watching and get me even more and more crazy crazy DIY ideas 😂😂😂🎉💡😅 hugs from little coooold Denmark
I saw someone use a marine paint on the top of an antique dresser she turned into a sink cabinet. She only used marine paint on the top, where water would be likely touching the top from wet washclothes to wet tooth brushes. It looked fantastic, and match the rest of the cabinet paint color.
I am so glad that you showed this video. It is so hard to learn when people only show perfection and leave out the tricky or problematic steps and solutions.
@@ivylane-homecould you have maybe use a roller to put the glue on? Sometimes you can get a more even coating. Just thinking ! Wow you must of been very frustrated, keep up the good work. Please keep trying different ways, because you will find what’s best for you. Much love and keep doing what you’re doing ♥️♥️♥️ Just saw the end, IT’S AMAZING ♥️♥️♥️
Your honesty on this piece, the struggle with the top, was appreciated. This work isn’t always easy. Love the fact you weren’t willing to sell it on an iffy quality glue adhesion. That’s integrity. 👍
Hi! Great job! One tip for doing veneer sheets. When you’re done ironing (you can iron directly on like a 4-5 setting so mid setting) take a wet cloth or sponge and wipe it down this will show you the spots that didn’t glue down all the way 🫶🏼 then iron those out! But great job! Super helpful to watch you do this!!
I was able to iron the spots down, but I was concerned about the long term. That is why I decided to take it off. It was just a fail all the way around 😩
came here to post this, its normal to not get all the glue set on the first go when doing it like this, you'll want to wipe it down with water and check for your lifted spots and iron those down, let it set, then do that a couple more times till you feel like you've got them all. worse case scenario they will show when you put on your final varnish/wax/etc and you'll have to iron it then re varnish the area
You need contact cement for the veneer. And for the bondo…use a 3” plastic spatula.. also on the veneer you need something to smooth out the bubbles. Been there, done it and it works great 👍🏻
@ivylaneinteriors a hard roller to press it down and get the bubbles out. Even a straight, wooden rolling pin could be used as you stick it down, going from one end to the other in one pass. It helps if someone else holds the veneer up as you roll it down. A hand roller is easier to work with for final pressing. Occasionally, a tiny hole made with a sewing needle allows you to push bubbles out.
No one gets through a new process without hiccups. Thanks for your transparency. Your pieces always look fab and I appreciate that you didn’t want to sell a flawed piece. Your resolution was spot on.
I use rubber cement to glue the veneer. In a well ventilated space, apply cement to both furniture surface and veneer back. Let both dry thoroughly. Space out long, thin dowel rods on surface. Align veneer on top. Working from the center, pull the middle rod out and smooth outward. Remove rods, one at a time, and smooth as you go. Once down, it will not come off! So make sure you are lined up!!! This method never fails me. You talked about the veneer lifting. I've never had that to happen with rubber cement.
@@ivylane-homealso, cutting the edges from below is usually best, like a partying knife. Those little edges you dealt with are a pain, though. It's best to leave a millimeter or so, then and it off, then accidentally cut to much off. Beautiful piece, though!
I’m SOOOO glad you made this suggestion! I used to watch The Furniture Guys on PBS some 30 years ago and could’ve sworn Joe - the professional furniture refinisher - used the same contact adhesive that you use for Formica countertops. He laid strips of cardboard across the piece so that when he flipped the veneer on top it didn’t stick. This way he could situate the veneer where he wanted it without problem. Then he pulled out the cardboard strips one by one - starting at the center and working outwards - and used a rubber roller to work the surface smooth. I learned so much from those shows - and I use the reupholstery skills I picked up from Ed to this day. I’m pretty sure those episodes are now available on TH-cam.
This is how a friend of ours who makes cabinets and desks for the state. Except he didn’t use rubber cement either, he use a specially made glue that you let dry and then used a pretty hot tool. Not a household iron. He put wool piece like you did the sheet to protect and really put some weight in it - he was tall big man. But the other thing I noted he said your bottom surface must be sound and very flat or it will dip and carry one during adhesive or when you finished it was down for the next 50 years but if not flat and he used these powerful lamps that painters use to make sure there aren’t any missed spots that had to be filled. And if they found a spot that wasn’t even with the rest of the piece he fixed it. He said if you didn’t, it would always show in the final piece, sometimes it’s best to start with a new base and even then you have to watch for spots. Wood glue isn’t appropriate I don’t know if the guy told the right thing. Did it say to use it in this situation? What did you use, will have to go back and look. Can’t remember now.
I really appreciate you showing your "flop" -- I like to think we can all learn from each other in this community. So thank you! And the finished product is GORGEOUS! A+ work! 🏆
I love that you took your time with this, you ran into problems and showed us how you can find another route. You did show the patience it takes to refinish. So many diy videos are chopped and makes it look so easy. It's not good work takes time
Holy Cow, what a transformation!! Really appreciate your sharing the ENTIRE process, especially the 'trials and errors'. I learned a great deal. Thank you.
this was one of the best videos i've watched for furniture flip because of the fact that you did not hide your learning curve. that is so appreciated for those of us learning too! the other great part is the actual outcome of your hard work and adapting to the hiccups seriously so good
I know, it’s really true. The veneer is a really common failure point. But to have that damaged particle board underneath? My heart sank for you. But I knew you’d overcome it, and I was so curious to see what you had done. Amazing.
Thank you for sharing the whole story. I learned a lot from your reflections on how things worked and why they might not have worked as you wanted, how you problem solved to get a more desired result, and I appreciated learning about the different products you tried. I think this illustrated how we sometimes learn the most through challenges . . . 😌
What a labor of love, so much hard work you put in but WOW, it’s gorgeous. Thank you for being humble enough to share even the ‘flops’ as it’s so helpful. Awesome flip and tutorial - huge thanks!!
Very nice work! The next time that you work with veneer use Weldwood contact cement, and use dowels to place it onto the mating surface. When you were using the Titebond I was hoping that it would work. I really like how you adapted and made the necessary adjustments. Nice work!
Hi from Cambridge UK. This is now quite, quite lovely. Well done for not giving up. You deserve a medal for persistence and for ensuring that the finished article is perfect
Thank you! Yes, my main concern was for the future owner. I didn’t want that veneer to lift on them down the road. I’ll figure it out on a future project…I hope! 😅
So beautiful! The legs were perfect for the piece. I really love your perseverance and honesty. A joint knife or taping knife would definitely help with smoothing out filler on larger areas. And as a few others have said, contact cement may be the way to go in the future. The painted top looks as good as the stained wood veneer, though. Wonderful job.
Since there's obvious wax on this piece, clean that I would suggest the following: clean off all the wax you can with your scraper and vacuum whatever, cover the waxed areas with a couple of layers of paper towels then using a pretty warm, warm iron go over the wet, the paper towels and see how much wax they can pull out of the wood with the heat And the paper towels to absorb the wax. You might be very surprised at how much you can get out of the surface that way. I tried this once, and it pretty much took almost all the wax out of the surface very easily. I've also raises the nap on the surface of the wood, which takes out, minor gouges and scrapes.
I'm usually not a fan of painted furniture, but this looks spectacular. It's not just the wonderful job you did with the surfaces, but the addition of the legs really puts the shine on that apple. I'd buy that piece in a heartbeat!
I love how you show your trial and errors. It gives all of us the courage to do the same. I also like how you show how each product works….good and bad. You give us the courage to try!! Thank you for your candid videos. We are all restoration warriors.
Добрый день. На ваш канал попала случайно и это первое видео просмотрено мною. Работа просто класс. Пойду смотреть другие Ваши видео. Лайк и подписка. Привет из России!
Sometimes, what we have projected in our heads, the piece has a mind of its own. After all that preserveranc and hard work, it paid off. STUNNING!! Very informative.
Thank you for saving this piece! I loved the vibe of this one, turned out fabulous. You are talented and so very patient. This was one of my favorites!!
WOW ! You are amazing , relentless and courageous . I loved loved loved this video . Your honesty is soooo refreshing . Gosh , I wish more videographer were this honest . I can't describe how terrific this presentation was. The end result was jaw dropping gorgeous. Thank you , so glad this appeared on my thread. P.S. this was worth $2500 easily .
Nothing beats the make and sturdiness of old furniture. I love my rock maple bedroom set that my great grandmother gave me. I would pick older furniture over any of the new things being sold. There are few artisans that make old world furniture now. Your finished remake is beautiful! Have to confess though, I love the beautiful wood on the drawers.
I admire your courage to admit to a fail. It’s how we all learn. Good for you and for us. Your honesty is refreshing. It’s a learning curve. And the piece is beautiful!!! Bravo 👏
I really love watching these “flips” . Taking old unloved furniture and bringing it back to life is such a positive and artistic thing to do. I admire the work you do and the care you take. You deserve every cent you make 😊😊😊
It turned out GORGEOUS! Such a petty you had so much trouble with the veneer application... I don't know the cost of the veneer you bought but it is probably more expensive than painting. And yes, you should use a large spatula to apply the bonds. The top was really challenging to becoming even but YOU NAILED IT! Thanks so much for sharing .
This is a positive comment - it was great to see your struggle and process in handling the problems, especially the top. So many videos make flipping look so simple, easy, and inexpensive. This flip was real, the best I have seen, and greatly appreciated. Thank you!
I had a similar problem painting my kitchen cabinets. The wood had split on some of the cabinet doors because of the sun. To say I used a ton of wood filler and wood putty is an understatement. But in the long run three years later my kitchen cabinets still look fantastic. That piece turned out beautifully. You did an outstanding job! Good for you, love that color.
I haven’t read through all the comments to see if anyone else offered any help, but the Flipping Drawers and Transcend channel furniture refinish artists are highly recommended from my point of view for learning how to do veneer work. They are amazing! You gave it a heck of a try and you are awesome for putting yourself out there so tip of the hat on showing your boo boo and how you overcame it. I subscribed for more. You were a pleasure to watch from my armchair!
Wao! Bravo! For me, this is a great persistence lesson. I liked Your humbleness, admitting the errors, trying to figure out what was going wrong. But, I was inspired for not quitting, for being compromised, and learning more and more in life, no matter how long you've been in an apparently "failed" project. Thanks, thanks, and thanks!
I really have great respect for all the hard work you put into this project. I loved the finished product. With today's selection of colors in homes, the Grey's and whites, it will fit in modern to farm house to Victorian. Truly a prized piece of furniture. Could be put in many different locations of a home. Dining room, den,living room, in a large fouier with a mirror placed above it . A bountiful bouquet of flowers or a nice art piece in the center. Possibilities are endless. Would love to own this piece.
I just have to tell you that, your a tremendously talented lady! I love how you made this a teachable moment, and the two things I think is a must is clean under the furniture base, and no over spray you took care of both! Bravo love it
I love this channel because she explains everything and shows where she succeeds and where she should have done something differently. She's so honest and real
Two things. I love Bondo spreaders. They work great. Second was did you weigh down the veneer like with weights books etc? I would have maybe tried to flip it upside down to dry? Awesome end result tho!
Yes, I have multiple Bondo spreaders, but I didn’t use them until later. 🥴 The ironing was supposed to take the place of weighing it down. 🤷♀️ I read later not to use yellow wood glue, but that was what they recommended. Lessons learned 🙌🏼
You did a beautiful job ... but the amount of work you put into it was extreme. If you saw another piece that would require a similar amount of intense effort, would you go for it? Or pass? You are a WARRIOR! Thank you for sharing your experience with this piece!!! 🧡
I really appreciate you showing us how things go wrong. I was watching carefully as i have veneer to replace on top of a cabinet. Not as large but still the same process. Will skip the wood glue and use a proper veneer adhesive
There is a really awesome little tool for trimming veneer (look up Chamfer plane) - they have different types that can tackle different types of edge. You can also just leave a lot of extra edge - just cutting off excess - then SAND it to the edge, which can be slower but worth it - as it has an extra bit of safety to it.
8:13 - 10/31/24 I loved watching this. You are amazing and did a beautiful job on this piece. It took you a long time but you did an amazing job explaining and even with your details of something not working. You explained every detail, what you were using, what worked, what didn’t, why and what you were going to do to fix it and what not to do. Thank you so much. I read what messages people wrote and they were all impressed like I was. Thank you for showing us what it takes to do over a piece of furniture that you got for almost nothing but put your heart and soul into it despite the trouble it caused you. We are your cheerleaders.
Way to persevere! I would have tucked it away after the first scrape of wax and probably not have pulled it out again for a year. Hah! You did an amazing job!
It is GORGEOUS! I could never have refinished it. It would have been perfect in my kitchen! I’ve been looking for extra counter space in my small kitchen. Something like this would work and give me more storage. Thank you for sharing! You did a wonderful job on it. God bless you!❤
The outcome is nice. I guess a real carpenter would have replaced that pressboard on top with a real wooden board. That would have cost more money but you would've saved the money for the veener and the glue.
Beautifully done. Love the quality of your patience. I have a small house, so something this large would take up too much room. Blessed are those who have the space to place this beautiful drawer piece in thier house.
You go girl! It looks and is amazing! I commend you big time for hanging in there and persevering through all your trial and errors! I learned a lot and thank you for taking us along on your journey. I only wish things had went smoother for you but we appreciate learning along with you. I also commend you for redoing the top so the person who bought it would not have issues down the road. I think I would have been in tears more than once. But in the end the buffet turned out beautiful!
I am 85 and have restored recycled etc. Also I am a woman. There are two other options for the top . No veneer but feill and a really good paint base. Then hand painted to look like marble. A marble scrap added to top or a glass top.
thanks for showing your flops! I soooo needed that. I watch the other videos that show how perfect each application they do the first time and it looks wonderful. I was not having that success and started to give up. But your flops inspired me to keep going. thank you.
Great job! This piece was simply gorgeous. I appreciate your humbleness and honesty even when making mistakes but finishing this project, and it looks amazing. Enjoyed watching the whole process. I definitely SUBSCRIBEd to your channel and am looking forward to watching more videos. Great job❤
Wow, what a beautiful finished piece! The transformation is remarkable in spite of all the hick ups! Also, what a profit, that in itself had to be so gratifying!
You did a beautiful job on this piece! You’ve inspired me to work on a Drexel dresser I bought used many years ago. Thank you for your knowledge and expertise.
This was an AMAZING flip, and yes, the listing price was a bargain, especially with all the hours and materials put in to update it. The final outcome was lovely, and it was done in a way where it will remain a timeless piece for many years to come.
Beautiful work and bravo on your patience. The veneering on the original piece did not stand the test of time. So smart moving ditching the veneering. And while this piece had endured much abuse, veneered pieces that have been babied can also bubble, lift and become brittle. I know I own them. 700.00 was a super great find for the buyer. You bought this piece many many years to come. Job well done!!
The moment the compressed wood/veneer top was revealed - I was inspired with the idea to replace the top with double the depth solid wood to create a two sided desk. Removal of center. Extending both sides with drawers to open from both sides.
My goodness, a Drexel piece brought back to life and not relegated to the garbage dump! Beautiful job! I grew up where Drexel furniture was manufactured in NC. Unfortunately, Drexel no longer exists thanks to NAFTA. It's top notch quality furniture made from American wood (not press board like so much junk furniture made in Asia today). Kids, take care of your parents' good furniture from the past. Do not put candles and crap on the tops to ruin it. Recycle it and make it gorgeous.
Drexel is usually such a great brand. I was surprised to find pressed board under the veneer on top, but the body was solid wood. I love vintage furniture 🤩
Nothing wrong with humility - sharing it is another thing all together 😏 You’re amazing and I love watching you work I’ve learned and loved so many of your pieces! Thanks for keeping it real🫶🏻✌🏻
It looks stunning I am happy you never gave up, so so happy God bless you keep up the good work, IN LIFE NEVER GIVE UP, I am so thrilled it came nicer than before🙏❤️🙌👌
Your project turned out beautiful! Thank you so much for airing your mistakes, you could have left those out and no one known the difference. Very brave, thank you so much! ❤
It turned out beautiful; you did a really good job on it, despite the trouble with the top. Plus you made an excellent deal on it price wise... Good Job!!!
Having worked with Bondo on vehicles a wide plastic flexible spreader would be best. There is a knack to it but just like finger waves and french braids once you get it you got that knack forever. If you watch a few auto body repair videos using Bondo you'll see the techniques that are actually easier and harder to learn at the same time. Kind of like using joint compound on drywall once you have the feathering technique by feel you got it.
You stated your purchase price. I was curious about the total cost of products purchased to fix, how many hours of labor, and the final sold price.
This was not a profitable flip, but it did cover my time. Here are my numbers: Costs
Price - $7.41
Legs - $35
Veneer - $75
Liners - $10
Supplies - $50
Invested 12+ hours
Sold for $700
Gross profit $522.59
@@ivylane-home thank you for your reply. My father had an "antique" store in the 80's, he refinished furniture too but preferred stains. He also enjoyed refinishing boats and motor-home interiors (wood and upholstery) .
What website did you use to sell it or did you put it in a store/antique booth/craft show ?
Hi there great job 👍the black rubber bloks you used when you sand in your hans what do the calls? I haved never ever seen them before and I just think that they are brilliant because I noticed you where meshing up whit the right highness to sand with the black Bloks 👍💪 thanks for watching and get me even more and more crazy crazy DIY ideas 😂😂😂🎉💡😅 hugs from little coooold Denmark
I’m
That was a lot of work. Good for you sticking with it.
Yes it was! Thank you! 😊
I saw someone use a marine paint on the top of an antique dresser she turned into a sink cabinet. She only used marine paint on the top, where water would be likely touching the top from wet washclothes to wet tooth brushes. It looked fantastic, and match the rest of the cabinet paint color.
I’ve never tried marine paint 🤷♀️
My daughter said marine paint needs to be cured with direct sunlight.
I am so glad that you showed this video. It is so hard to learn when people only show perfection and leave out the tricky or problematic steps and solutions.
It’s not easy to share the fails, but it’s definitely realistic - at least for me 🤣
@@ivylane-homecould you have maybe use a roller to put the glue on? Sometimes you can get a more even coating. Just thinking ! Wow you must of been very frustrated, keep up the good work. Please keep trying different ways, because you will find what’s best for you. Much love and keep doing what you’re doing ♥️♥️♥️
Just saw the end, IT’S AMAZING ♥️♥️♥️
Your honesty on this piece, the struggle with the top, was appreciated. This work isn’t always easy. Love the fact you weren’t willing to sell it on an iffy quality glue adhesion. That’s integrity. 👍
Thank you! Yes, I felt strongly to make it right for the new buyer. 🙌🏼
Looks GREAT
Yeah. Honesty is a fast disappearing thing these days. We appreciate your good nature. No one wants to buy a lemon!
That's what I thought...an unvarnished view of the process is extremely valuable.
Beautiful
Thanks for being humble and sharing your mistakes. That way we all learn. Great job. It turned out beautifully 😊
Oh gosh, it is humbling, but I hope it helps. 🫶
I'm no wuss but your courage at tackling that veneer is commendable. RESPECT.
I tend to be a bit overconfident 🫠🙃
Hi! Great job! One tip for doing veneer sheets. When you’re done ironing (you can iron directly on like a 4-5 setting so mid setting) take a wet cloth or sponge and wipe it down this will show you the spots that didn’t glue down all the way 🫶🏼 then iron those out! But great job! Super helpful to watch you do this!!
I was able to iron the spots down, but I was concerned about the long term. That is why I decided to take it off. It was just a fail all the way around 😩
They would have stayed down. The moisture didn’t cause the lifting, it just revealed where you don’t have a good bond.
came here to post this, its normal to not get all the glue set on the first go when doing it like this, you'll want to wipe it down with water and check for your lifted spots and iron those down, let it set, then do that a couple more times till you feel like you've got them all. worse case scenario they will show when you put on your final varnish/wax/etc and you'll have to iron it then re varnish the area
Cement glow much better
I would have covered the top with laun
Your tenacity on this project is inspiring. It's very easy to give up, but to keep on going like you did, shows true character. Great job!!
Thank you so much! 😊 🙌🏼
Came out BEAUTIFUL
Bless your heart. I would have fallen over on top of the piece and cried! You are amazing.
It was tempting 🫠 Thank you! 😊
You need contact cement for the veneer. And for the bondo…use a 3” plastic spatula.. also on the veneer you need something to smooth out the bubbles. Been there, done it and it works great 👍🏻
Yes, contact cement seems to be the consensus. I have multiple Bondo spreaders. I just forgot to use them until later. 🤦♀️
Oh…good to know! Thank you! 👍🏼
@ivylaneinteriors a hard roller to press it down and get the bubbles out. Even a straight, wooden rolling pin could be used as you stick it down, going from one end to the other in one pass. It helps if someone else holds the veneer up as you roll it down. A hand roller is easier to work with for final pressing. Occasionally, a tiny hole made with a sewing needle allows you to push bubbles out.
@@DL-wm5quThank you those are such good tips!
No one gets through a new process without hiccups. Thanks for your transparency. Your pieces always look fab and I appreciate that you didn’t want to sell a flawed piece. Your resolution was spot on.
Thank you so much! 😊
You really slayed that beast. I enjoy watching your work but felt your pain. It turned out great.
@@robertheffernan1188 ha, yes!! 🤣Thank! 🙌🏼
I really enjoyed her work, as well
Match sticks work well to they are a little softer . It is looking good though . You should have used a wet cloth and iron it again .
Wow $700 that person was blessed!
You did fantastic work! I enjoyed learning from you!
Thanks for watching! 🤩🙌🏼
I use rubber cement to glue the veneer. In a well ventilated space, apply cement to both furniture surface and veneer back. Let both dry thoroughly. Space out long, thin dowel rods on surface. Align veneer on top. Working from the center, pull the middle rod out and smooth outward. Remove rods, one at a time, and smooth as you go. Once down, it will not come off! So make sure you are lined up!!! This method never fails me. You talked about the veneer lifting. I've never had that to happen with rubber cement.
Thank you for the detailed suggestion 🙌🏼😊
@@ivylane-homealso, cutting the edges from below is usually best, like a partying knife. Those little edges you dealt with are a pain, though. It's best to leave a millimeter or so, then and it off, then accidentally cut to much off. Beautiful piece, though!
@@DL-wm5qu thanks! 😊🙌🏼
I’m SOOOO glad you made this suggestion! I used to watch The Furniture Guys on PBS some 30 years ago and could’ve sworn Joe - the professional furniture refinisher - used the same contact adhesive that you use for Formica countertops.
He laid strips of cardboard across the piece so that when he flipped the veneer on top it didn’t stick. This way he could situate the veneer where he wanted it without problem. Then he pulled out the cardboard strips one by one - starting at the center and working outwards - and used a rubber roller to work the surface smooth.
I learned so much from those shows - and I use the reupholstery skills I picked up from Ed to this day.
I’m pretty sure those episodes are now available on TH-cam.
This is how a friend of ours who makes cabinets and desks for the state. Except he didn’t use rubber cement either, he use a specially made glue that you let dry and then used a pretty hot tool. Not a household iron. He put wool piece like you did the sheet to protect and really put some weight in it - he was tall big man. But the other thing I noted he said your bottom surface must be sound and very flat or it will dip and carry one during adhesive or when you finished it was down for the next 50 years but if not flat and he used these powerful lamps that painters use to make sure there aren’t any missed spots that had to be filled. And if they found a spot that wasn’t even with the rest of the piece he fixed it. He said if you didn’t, it would always show in the final piece, sometimes it’s best to start with a new base and even then you have to watch for spots.
Wood glue isn’t appropriate I don’t know if the guy told the right thing. Did it say to use it in this situation?
What did you use, will have to go back and look. Can’t remember now.
I really appreciate you showing your "flop" -- I like to think we can all learn from each other in this community. So thank you! And the finished product is GORGEOUS! A+ work! 🏆
It’s hard to share the failures, but I hope it helps others! Thank you. 🫶
Absolutely beautiful. THANK YOU for sharing. I love watching these before and afters.
This piece turned out beautifully and video was very helpful! 😊
It looks amazing, We all learned from your mistake. Thanks for sharing, I enjoyed it
I love that you took your time with this, you ran into problems and showed us how you can find another route. You did show the patience it takes to refinish. So many diy videos are chopped and makes it look so easy. It's not good work takes time
Good work definitely takes time! Well said 🙌🏼😊
Holy Cow, what a transformation!! Really appreciate your sharing the ENTIRE process, especially the 'trials and errors'. I learned a great deal. Thank you.
Thank you! It’s not easy sharing failures but I hope it helps. 😩😊🫶
this was one of the best videos i've watched for furniture flip because of the fact that you did not hide your learning curve. that is so appreciated for those of us learning too! the other great part is the actual outcome of your hard work and adapting to the hiccups seriously so good
Aw, thank you! Such kind words. 🫶 I appreciate it.
I know, it’s really true. The veneer is a really common failure point. But to have that damaged particle board underneath? My heart sank for you. But I knew you’d overcome it, and I was so curious to see what you had done. Amazing.
Stunning ❤
Looks gorgeous 👏👏👏👏
Thank you for sharing the whole story. I learned a lot from your reflections on how things worked and why they might not have worked as you wanted, how you problem solved to get a more desired result, and I appreciated learning about the different products you tried. I think this illustrated how we sometimes learn the most through challenges . . . 😌
You are so welcome! Thanks for your feedback. 🙌🏼😊
What a labor of love, so much hard work you put in but WOW, it’s gorgeous. Thank you for being humble enough to share even the ‘flops’ as it’s so helpful. Awesome flip and tutorial - huge thanks!!
Thank you! It’s definitely humbling to share the fails, but I hope it helps others. 🫶🤩
Watched this at 11:00 pm at night to relax me before bed. Your voice and work is peaceful! I could never do this but I enjoy watching transformations!
Well, no one has ever said that. 😅 Glad to hear it’s relaxing though 😬🙌🏼
Me, too
Maybe you could use more glue?
Excellent work you did. I liked the piece when I first saw, all the details, and the sculpture is so beautiful, now I see it's beauty much much better
Thanks so much!! 🤩🙌🏼
Very nice work! The next time that you work with veneer use Weldwood contact cement, and use dowels to place it onto the mating surface. When you were using the Titebond I was hoping that it would work. I really like how you adapted and made the necessary adjustments. Nice work!
Yes, that seems to be the consensus 🙌🏼 Thank you! 😊
Hi from Cambridge UK. This is now quite, quite lovely. Well done for not giving up. You deserve a medal for persistence and for ensuring that the finished article is perfect
Thank you! Yes, my main concern was for the future owner. I didn’t want that veneer to lift on them down the road. I’ll figure it out on a future project…I hope! 😅
You make DIY’ing look so therapeutic and fun to do. Thank you for being transparent and humble! Your work is amazing ❤
Sometimes it’s therapeutic and sometimes it’s a headache 🤣 Thanks so much!! 🤩🙌🏼
After you were done it looked like a beautiful classic piece of furniture! Thanks so much for including the parts that you had to struggle through.❤❤❤
You’re welcome! This is more of a learn with me channel 🤣 Thanks so much! 🙌🏼
So beautiful! The legs were perfect for the piece. I really love your perseverance and honesty. A joint knife or taping knife would definitely help with smoothing out filler on larger areas. And as a few others have said, contact cement may be the way to go in the future. The painted top looks as good as the stained wood veneer, though. Wonderful job.
Thanks so much! Yep, I need a better tool. I even have a Bondo spreader but didn’t use it until later 🤦♀️
Since there's obvious wax on this piece, clean that I would suggest the following: clean off all the wax you can with your scraper and vacuum whatever, cover the waxed areas with a couple of layers of paper towels then using a pretty warm, warm iron go over the wet, the paper towels and see how much wax they can pull out of the wood with the heat And the paper towels to absorb the wax. You might be very surprised at how much you can get out of the surface that way. I tried this once, and it pretty much took almost all the wax out of the surface very easily. I've also raises the nap on the surface of the wood, which takes out, minor gouges and scrapes.
Sadly, it had already ruined the veneer
You know the project is done accurately when the quilting rulers come out 😂😂. This turned out beautifully!
Ha, you know it! 🤣 Thanks so much!! 🤩🙌🏼
I'm usually not a fan of painted furniture, but this looks spectacular. It's not just the wonderful job you did with the surfaces, but the addition of the legs really puts the shine on that apple. I'd buy that piece in a heartbeat!
The legs really helped this piece. Thank you! 🤩
Thank-you so much for being humble and sharing with us your mistakes. You are amazing!
It’s kinda hard, but I hope it’s helpful. Thank you! 🫶
I love how you show your trial and errors. It gives all of us the courage to do the same. I also like how you show how each product works….good and bad. You give us the courage to try!! Thank you for your candid videos. We are all restoration warriors.
Добрый день. На ваш канал попала случайно и это первое видео просмотрено мною. Работа просто класс. Пойду смотреть другие Ваши видео. Лайк и подписка. Привет из России!
My pleasure! 🙌🏼😊
Sometimes, what we have projected in our heads, the piece has a mind of its own. After all that preserveranc and hard work, it paid off. STUNNING!!
Very informative.
Oh gosh, isn’t that true! So many times these pieces have a mind of their own . 🫠 Thank you SO much. 🤩🙌🏼
Thank you for saving this piece! I loved the vibe of this one, turned out fabulous. You are talented and so very patient. This was one of my favorites!!
Aw, thanks Rachel!
WOW ! You are amazing , relentless and courageous . I loved loved loved this video . Your honesty is soooo refreshing . Gosh , I wish more videographer were this honest . I can't describe how terrific this presentation was. The end result was jaw dropping gorgeous. Thank you , so glad this appeared on my thread.
P.S. this was worth
$2500 easily .
Well, that is so kind of you to say. Thank you! 🤩🙌🏼
I love to see all the outfit changes to see just how many days you worked on this! lovely result 😀
Ha! For real! It was a process. 🙃🫠
Nothing beats the make and sturdiness of old furniture. I love my rock maple bedroom set that my great grandmother gave me. I would pick older furniture over any of the new things being sold. There are few artisans that make old world furniture now. Your finished remake is beautiful! Have to confess though, I love the beautiful wood on the drawers.
I agree! I love vintage furniture. The quality is hard to beat!
Your hard work paid off
I admire your courage to admit to a fail. It’s how we all learn. Good for you and for us. Your honesty is refreshing. It’s a learning curve. And the piece is beautiful!!! Bravo 👏
Thanks Kathleen! Not easy to share the fails, but you’re right, that’s how we all learn! Thanks so much!! 🤩🙌🏼
I really love watching these “flips” . Taking old unloved furniture and bringing it back to life is such a positive and artistic thing to do. I admire the work you do and the care you take. You deserve every cent you make 😊😊😊
Aw, thank you!!
It turned out GORGEOUS! Such a petty you had so much trouble with the veneer application... I don't know the cost of the veneer you bought but it is probably more expensive than painting. And yes, you should use a large spatula to apply the bonds. The top was really challenging to becoming even but YOU NAILED IT! Thanks so much for sharing .
Yes, the veneer was a pricey mistake, but I’m keeping it to use for veneer repairs 🙌🏼 Thank you!
This is a positive comment - it was great to see your struggle and process in handling the problems, especially the top. So many videos make flipping look so simple, easy, and inexpensive. This flip was real, the best I have seen, and greatly appreciated. Thank you!
Thanks Deborah. 🫶 It’s not easy sharing fails, but it’s real life and things rarely go to plan - well, for me anyway 😅
I had a similar problem painting my kitchen cabinets. The wood had split on some of the cabinet doors because of the sun. To say I used a ton of wood filler and wood putty is an understatement. But in the long run three years later my kitchen cabinets still look fantastic. That piece turned out beautifully. You did an outstanding job! Good for you, love that color.
Thanks so much! 🤩
I haven’t read through all the comments to see if anyone else offered any help, but the Flipping Drawers and Transcend channel furniture refinish artists are highly recommended from my point of view for learning how to do veneer work. They are amazing! You gave it a heck of a try and you are awesome for putting yourself out there so tip of the hat on showing your boo boo and how you overcame it. I subscribed for more. You were a pleasure to watch from my armchair!
Thank you! Yes, a few others mentioned them as well. Always something to learn ☺️ Welcome, glad you’re here 🙌🏼
Wao! Bravo!
For me, this is a great persistence lesson. I liked Your humbleness, admitting the errors, trying to figure out what was going wrong. But, I was inspired for not quitting, for being compromised, and learning more and more in life, no matter how long you've been in an apparently "failed" project. Thanks, thanks, and thanks!
Aw, thank you! It’s not always easy sharing the fails, but it’s real life. 🤷♀️
I really have great respect for all the hard work you put into this project. I loved the finished product. With today's selection of colors in homes, the Grey's and whites, it will fit in modern to farm house to Victorian. Truly a prized piece of furniture. Could be put in many different locations of a home. Dining room, den,living room, in a large fouier with a mirror placed above it . A bountiful bouquet of flowers or a nice art piece in the center. Possibilities are endless. Would love to own this piece.
Thank you! 🫶 It was a very popular color 🤩
I just have to tell you that, your a tremendously talented lady! I love how you made this a teachable moment, and the two things I think is a must is clean under the furniture base, and no over spray you took care of both! Bravo love it
Aw, thank you! 🫶
I love this channel because she explains everything and shows where she succeeds and where she should have done something differently. She's so honest and real
You're so sweet! Thanks so much!! 🤩🙌🏼
Tons of respect for showing your veneer flop. I’ve never done veneer, but Jon Peters has a great video on doing large veneers (on a cabinet he built).
It’s not easy showing failures. I have a lot to learn but I will get it one of these days. 🙌🏼
Great job, I’m in awe of your determination to keep at it till it’s done, you are a machine! 🤗
Aw, thank you. 🫶
Well done! I love that these are long form videos and that you share what doesn’t work as well as what works.
Thank you! It’s hard to share the fails, but I hope it can be helpful too. 😊
Two things. I love Bondo spreaders. They work great. Second was did you weigh down the veneer like with weights books etc? I would have maybe tried to flip it upside down to dry? Awesome end result tho!
Yes, I have multiple Bondo spreaders, but I didn’t use them until later. 🥴 The ironing was supposed to take the place of weighing it down. 🤷♀️ I read later not to use yellow wood glue, but that was what they recommended. Lessons learned 🙌🏼
OMG, I love the way this piece turned out. You did an amazing job...❤
Thank you so much! 😊
You did a beautiful job ... but the amount of work you put into it was extreme. If you saw another piece that would require a similar amount of intense effort, would you go for it? Or pass?
You are a WARRIOR! Thank you for sharing your experience with this piece!!! 🧡
I think I would pass. 😅 I did make for a good video though 😂
I really appreciate you showing us how things go wrong. I was watching carefully as i have veneer to replace on top of a cabinet. Not as large but still the same process. Will skip the wood glue and use a proper veneer adhesive
You’re welcome. Hard to share, but we learn so much in the failures too. 😊🙌🏼
You put a tremendous amount of work into this piece! Well done..it’s beautiful ❤
Aw, thank you! 😊 🙌🏼
There is a really awesome little tool for trimming veneer (look up Chamfer plane) - they have different types that can tackle different types of edge. You can also just leave a lot of extra edge - just cutting off excess - then SAND it to the edge, which can be slower but worth it - as it has an extra bit of safety to it.
I’ll look it up, thanks!! 🙌🏼
New here and WOW, this turned out stunning!! Thank you for showing us your mishaps, for those of us just starting out. ❤😊
Thank you! 🫶
I'm new to your channel. Considering all the work you put into it, the finished product came out amazing, beautiful and you didn't give up.
Thank you so much, Maria! 🫶🤩
I agree the added feet gave it a whole new look. I admire your dedication to doing a really good job. I'm glad you did well on the sale.
I agree! The feet really helped! Thanks so much. 🙌🏼
“Super pleased”??? That is an understatement. A miracle!!!
Aw, thank you! 🫶🤩
I like how the accordion detail "popped" when painted!
me too!
8:13 - 10/31/24
I loved watching this. You are amazing and did a beautiful job on this piece. It took you a long time but you did an amazing job explaining and even with your details of something not working. You explained every detail, what you were using, what worked, what didn’t, why and what you were going to do to fix it and what not to do. Thank you so much. I read what messages people wrote and they were all impressed like I was. Thank you for showing us what it takes to do over a piece of furniture that you got for almost nothing but put your heart and soul into it despite the trouble it caused you. We are your cheerleaders.
Aw, you are so sweet! Thank you for your kind words 🫶😊
Way to persevere! I would have tucked it away after the first scrape of wax and probably not have pulled it out again for a year. Hah! You did an amazing job!
Ha! It was tempting, but it’s so big I needed to finish it so I could get it out of my garage! 🤣 Thank you!
Looks great! I've got to get a paint sprayer, that's a game changer!
Paint sprayers are a big help in getting a factory like finish. 🤩
It is GORGEOUS! I could never have refinished it. It would have been perfect in my kitchen! I’ve been looking for extra counter space in my small kitchen. Something like this would work and give me more storage. Thank you for sharing! You did a wonderful job on it. God bless you!❤
Thank you! 😊
The outcome is nice. I guess a real carpenter would have replaced that pressboard on top with a real wooden board. That would have cost more money but you would've saved the money for the veener and the glue.
Probably 😊🙌🏼
You know. The piece was not an expensive one. Therefore I think she did the right thing. Real carpenter or not.
What a job!! I bet you were pulling your hair out over that top 😖 It turned out very nice and elegant so it paid off 🤗
Oh gos, yes! So frustrating 😩
Beautifully done. Love the quality of your patience. I have a small house, so something this large would take up too much room. Blessed are those who have the space to place this beautiful drawer piece in thier house.
Thanks so much!! 🤩🙌🏼
where is your like button I wonder, you have a dislike button and an unlike button :/
☺️🙌🏼
OMYGOSH! I found it 😂 I'll just leave this here for a laugh🤣
@@angelaforsyth1092 🤣
You go girl! It looks and is amazing! I commend you big time for hanging in there and persevering through all your trial and errors! I learned a lot and thank you for taking us along on your journey. I only wish things had went smoother for you but we appreciate learning along with you. I also commend you for redoing the top so the person who bought it would not have issues down the road. I think I would have been in tears more than once. But in the end the buffet turned out beautiful!
Thank you! It was a rough journey, but I loved the final product 🤩
I am 85 and have restored recycled etc. Also I am a woman. There are two other options for the top . No veneer but feill and a really good paint base. Then hand painted to look like marble. A marble scrap added to top or a glass top.
Those are good options too! 😊🙌🏼
thanks for showing your flops! I soooo needed that. I watch the other videos that show how perfect each application they do the first time and it looks wonderful. I was not having that success and started to give up. But your flops inspired me to keep going. thank you.
You are so welcome! It’s not easy to share the mistakes, but I hope it’s helpful 😊
Turned out beautiful! You did an amazing job on it!
Many thanks! 😊
Great job! This piece was simply gorgeous. I appreciate your humbleness and honesty even when making mistakes but finishing this project, and it looks amazing. Enjoyed watching the whole process. I definitely SUBSCRIBEd to your channel and am looking forward to watching more videos. Great job❤
Aw, such kind words 🫶 I appreciate it and welcome! I’m glad you’re here 🤩🙌🏼
Yes I appreciate your willingness to be honest about your mistakes ...we all get to learn from them thanks a million
I appreciate that. Thank you! 😊
Wow, what a beautiful finished piece! The transformation is remarkable in spite of all the hick ups! Also, what a profit, that in itself had to be so gratifying!
Thanks so much!! 🤩🙌🏼 I’m thankful for a quick and profitable sale.
Absolutely beautiful!! Thanking for sharing how you made decisions along the way, learning as you went. Great video
Thank you so much! 😊
You did a beautiful job on this piece! You’ve inspired me to work on a Drexel dresser I bought used many years ago. Thank you for your knowledge and expertise.
Awesome! You’re welcome and good luck on your project! 🙌🏼😊
You had a lot of fun with this piece .🤓it’s a real beauty , great job .
Hm, fun? Not sure about that! 😅 Thank you! 😊
Your perseverance and drive produced an absolutely beautiful result! Congratulations!
Thank you so much! 😊
This was an AMAZING flip, and yes, the listing price was a bargain, especially with all the hours and materials put in to update it. The final outcome was lovely, and it was done in a way where it will remain a timeless piece for many years to come.
Thanks so much!! 🤩🙌🏼
Looks flawless and perfect! Amazing job!
Aw, thank you! 🤩🫶
@@ivylane-home yes so awesome! you so welcome:).
Beautiful work and bravo on your patience. The veneering on the original piece did not stand the test of time. So smart moving ditching the veneering. And while this piece had endured much abuse, veneered pieces that have been babied can also bubble, lift and become brittle. I know I own them. 700.00 was a super great find for the buyer. You bought this piece many many years to come. Job well done!!
Aw, thank you for your kind words. 🫶
The moment the compressed wood/veneer top was revealed - I was inspired with the idea to replace the top with double the depth solid wood to create a two sided desk.
Removal of center.
Extending both sides with drawers to open from both sides.
Well, that is an option too ☺️
My goodness, a Drexel piece brought back to life and not relegated to the garbage dump! Beautiful job! I grew up where Drexel furniture was manufactured in NC. Unfortunately, Drexel no longer exists thanks to NAFTA. It's top notch quality furniture made from American wood (not press board like so much junk furniture made in Asia today). Kids, take care of your parents' good furniture from the past. Do not put candles and crap on the tops to ruin it. Recycle it and make it gorgeous.
Drexel is usually such a great brand. I was surprised to find pressed board under the veneer on top, but the body was solid wood. I love vintage furniture 🤩
Beautiful job ❤ a lot of hard work, put the results are amazing 👏 ❤
Thank you so much! ☺️
Nothing wrong with humility - sharing it is another thing all together 😏
You’re amazing and I love watching you work
I’ve learned and loved so many of your pieces!
Thanks for keeping it real🫶🏻✌🏻
Candace, you are too kind 🫶🤩
BRAVO!!!
Good attitude and working determination -
wins every time!
Thanks so much!! 🤩🙌🏼
Glad to see the original knobs..gorgeous.
They were so lovely restored! 😊
Wow. I would have never seen the potential in that piece. And your tenacity is most impressive. Lady!
Aw, thanks!😊
A labor of love. ENJOY anyway. Some people yet are not having the opportunity to explore their gifts 'n hobbies!! DON'T SWEAT. ENJOY 'N SOAR❗❗❗✨✨✨
Thanks Bonita! I always learn something on each project ☺️
Beautiful and hard work. The outcome is outstanding.
The off white color is so nice.
That turned out beautiful! For all the work you put into it, I'm very impressed!!❤
Thanks so much!! 🤩🙌🏼
It looks stunning I am happy you never gave up, so so happy God bless you keep up the good work, IN LIFE NEVER GIVE UP, I am so thrilled it came nicer than before🙏❤️🙌👌
I’m glad I didn’t give up too! 🙌🏼😊
Your project turned out beautiful! Thank you so much for airing your mistakes, you could have left those out and no one known the difference. Very brave, thank you so much! ❤
Thanks! Yep, never easy showing mistakes, but they do happen! 😬
It turned out beautiful; you did a really good job on it, despite the trouble with the top. Plus you made an excellent deal on it price wise... Good Job!!!
Thanks so much! 😊 Indeed! 🙌🏼
Oh WOW!!!! You did a fantastic job! The legs made a huge difference!! Knowing what products to use also helps a ton. Great job! It's beautiful!
Thank you! I agree the legs helped so much! ☺️
Awesome job! Determination is key and experience, of course . I loved watching your video. Thanks for sharing.
Thanks for watching! I appreciate it 🫶🤩
GREAT JOB! You gave me some new ideas! I’m glad you saw the potential in this piece. Looks FANTASTIC!
Thanks so much!! 🤩🙌🏼
Having worked with Bondo on vehicles a wide plastic flexible spreader would be best. There is a knack to it but just like finger waves and french braids once you get it you got that knack forever. If you watch a few auto body repair videos using Bondo you'll see the techniques that are actually easier and harder to learn at the same time. Kind of like using joint compound on drywall once you have the feathering technique by feel you got it.
Yep, that’s what I need! That and practice 😉
That turned out spectacular!!!
Aw, thank you!