Christ that must have been a very special screwdriver in it's day to deserve that amount of "mucking about"😮. I can appreciate that not everyone has access to new tools etc' so it's lucky he had a hot glue shop just up the road😊
Стоимость палочек плюс потраченное время и усилия равно тому, чтоб пойти купить новый инструмент. Причем надёжный. А за идею спасибо! Думаю, что пригодится.
@@user-wj7sx7wj2o ты не европеец, потому делаешь все с лучшим результатом и меньшими расходами. А европейцы деляют это для самоутверждения, и не важно какой ценой.))))
@@user-pd1ou8nd9h что за деревяшки в составе подумал я... Оказывается автор делает из них форму. Меня заинтересовало в этом видео попытка получить твердый материал самостоятельно, который мне мог бы пригодится. Жаль что мне данный полученный материал не подходит, но несмотря на это я благодарен автору за идею.
I personally would have used a hot glue gun in conjunction with a heat gun. I would have wrapped the non-handle side with a cloth. Then while spinning the rod with one hand & adjusting the angle I would apply layers of glue. In a glass blowing fashion I would mold the shape of my handle. Id use the heat gun to reheat a whole area of the handle which will make the surface smooth as glass. You can also quick cool in a tall cup or tub of water. Using this method you can add different types of glues in whatever order you like giving you a nice layered effect. The smoother the surface cools the more transparent it will be when completely cooled. Its a very fun and cheap material to craft with. I've been using hot glue for all kinds of crafts for years! It all comes down to controlling heat and using gravity to your advantage.
Дорогое удовольствие. Из нарезанной на ленты пластиковой бутылки от напитков ручка хорошая получается. Расход только на прогрев уже готовой ручки. Но идея мне понравилась, где-то пригодится.
Compared to the cost of silicon and chisels and the effort put in, it's actually several times better than buying a new one. It's still good, but you also created a video to get attention. It's great. Wishing you continued success.
усложнили простейшее дело ..чтобы сделать такую ручку к клеевому пистолету нужен только кусок фольги ..и вообще можно не тратить деньги а получить более красивый вариант из цветных пластиковых крышек от бутылок ..
I have rheumatoid arthritis and just to be able to make the handle just right for my hands will be something I will be doing from now on. Thank you for sharing your ideas. Very clever 👏 👌
I would not waste my glue sticks on this. If im in a middle of a project its quicker / easier to buy another. And this is coming from a person that likes crafting/ putting stuff together.
Baking soda is great with all types of glues, you just have to test it with different glues to find out the results. You will be surprised which work and which don't. 👍🇮🇪💚🙏🏼
Вместо термоклея намного дешевле и эффектнее было бы расплавить все золотые, серебрянные и платиновые изделия в доме для такой ручки, а для электроизоляции дополнительно обмотать её матерчатой черной изолетнтой в 6 слоев.
@@user-lz3wg1qs4h В истории Великой Руси всегда было 2 критерия оценки: цена и качество. Никто не отрицает подобного решения задачи, но не такой ценой: и на телеге можно ехать на квадратных колесах, однако этого нет в жизненной практике, т.к противоречит закону созранения энергии!!!
Excellent idea I love it and have several chisels I need to do myself thanks for sharing. On a side note you could also add food colouring if you want to be fancy 😊
I’ve considered doing something similar to make a replacement handle, but with melted down HDPE instead. However, sanding it down to smooth it out creates even more microplastics, which I’m not eager to contribute to as there is so much in our environment and bodies already, so if I do, maybe I’ll mold it by hand instead. I do love finding more uses for things that would otherwise be thrown into the landfill and repairing things with what’s already at hand.
Sig Wong 2 part epoxy resin. If you're able to invest in glue sticks and see this, get the resin instead. this is accidentally a neat little molding course fit with a mold box and all haha well done. hot glue dried doesn't come even close to how hard a 2 part epoxy is. I love the recycled tool use though.
This would be better aimed at making easy grasping handles for tools, eating utensils, toothbrushes etc. You could also make a cool faux antler handle for a knife
I'm not sure how the glue and baking soda would work, but I like this idea using epoxy resin instead and maybe turn it on a lathe or drill press to shape it.
@@kathyjones274 there quite literally is no commercial adhesive even in the same league as 2 part epoxy. epoxy resin chemically does a lot more than you think. I'd be curios where your troubles are with it - but it's also fairly simple to use but there are scenarios it won't work as well. This is not one of them. it's made to do this usually with a shaleD of atleast 80. That's work site hard hat material by comparison
Seem like a good idea at the time ... until it stay in the car on a hot summer day lmao . I believe there is better alternative that don't Melt so easy . i suggest you use gaffer tape to bring it to desired size and coat it with few layers of Dry Fast rubber .
Mucho trabajo para un simple mango de una erramienta se puede hacer más fácil sin utilizar tantas otras erramientas que a veces no las tienes,Pero igual esta muy bueno el video amigo saludos de Carlos de Montevideo Uruguay 🇺🇾🇺🇾🇺🇾
Por dios si expandimos el cerebro nos damos cuenta de lo fácil que podemos reparar con esta mescla por ejemplo la montura de un lente roto,sellar un orificio en la pared,unir un objeto de porcelana rota,inclusive sellar para siempre las manecillas de los gavetero para ropa y mas.gracia me gusto el vídeo.
Лучше бы на отвёртку "родные" деревянные щёчки приклепал, хорошая была когда то отвёртка... А вот зубило никакое, ну если только медный провод рубить, который обычно все перекусывают, удобнее как то, тем более бокорезы есть .
Good idea. I imagine it fits anything that has a broken handle. Depending on the price of a new one, you might be able to save a lot of money, so thanks for the idea.😁👍❤️
You could have chucked it in a drill and turned it like a lathe using sandpaper. I would have been afraid of gunking up my grinder wheel with the glue. You also could have hit it again with the heat gun to soften it a bit so you could grip the handle tight and made it ergonomically yours.
"Mind = blown! I never would have thought glue sticks could be used like this. This video opened my eyes to a whole new world of DIY possibilities. Thanks for the enlightening content!"
А можно просто в лесу спилить сучок, дома просверлить в нем дырку, влить туда любого клея с питьевой содой и вставить хвостовик любого инструмента. Даже ножниц и плоскогубцев. А снаружи-обкрутить проволокой и изолентой для прочности.
People who think this is a waste of glue sticks ⬇
I think the screwdriver would have been cheaper if I had bought it 😮
Christ that must have been a very special screwdriver in it's day to deserve that amount of "mucking about"😮. I can appreciate that not everyone has access to new tools etc' so it's lucky he had a hot glue shop just up the road😊
Agree with you. Ça s'adresse aux survivalistes et autres mac-gyvers... Ou pour la beauté du geste.
Стоимость палочек плюс потраченное время и усилия равно тому, чтоб пойти купить новый инструмент. Причем надёжный. А за идею спасибо! Думаю, что пригодится.
А мы плавили простой полипропилен и обволакивали ручки инструмента. И стоимость получалась в 1000 раз дешевле.
@@user-wj7sx7wj2o спасибо за идею
Having rheumatoid arthritis and handles on alot of tools cramps hands this was a good idea for me.
@@user-wj7sx7wj2o ты не европеец, потому делаешь все с лучшим результатом и меньшими расходами. А европейцы деляют это для самоутверждения, и не важно какой ценой.))))
овчинка выделки не стоит
главное теперь такое долото не оставлять на солнце, а то оно примет свой изначальный сломанный вид)
Nor in freezing temperatures.. makes hot melt glue extremely brittle.
Это будет неплохо можно сделать модельный воск более твердым и его можно обрабатывать фрезой на ЧПУ станке. При нагреве можно использовать вторично.
Хреновина полная, стоимость клея, плюс деревяшки, работа... Проще новый инструмент купить.
@@user-pd1ou8nd9h что за деревяшки в составе подумал я... Оказывается автор делает из них форму. Меня заинтересовало в этом видео попытка получить твердый материал самостоятельно, который мне мог бы пригодится. Жаль что мне данный полученный материал не подходит, но несмотря на это я благодарен автору за идею.
@@user-pd1ou8nd9hкогда коту заняться нечем, он вылизывает свои яйца 😂😂😂
Thank you for showing us how to make a prison shank
😂😂😂😂 That's gold😂😂😂
😂
Great idea we have a few fav broken kitchen knives
Лучше взять пятитысячные купюры,намазать их клеем и намотать на отвёртку,получится не плохая ручка.
Умница красавчик
I searched everywhere, I have glue sticks but couldn’t find a chisel with a missing handle. I will save this just in case I ever come across one.
i have a chisel with a missing handle you can have
I saw this done with ca glue and baking soda
It is not only for chisel , other tools
Use $300 worth of tools and make one. Then turn it into a sex toy.
😂😂😂
Какой ерундой занимаются люди.....Потрясающе!
Каждый сходит с ума по своему.
Умница
Вот именно. Тратить не дешевые клевые стержни на такую хрень это кощунство!
I personally would have used a hot glue gun in conjunction with a heat gun. I would have wrapped the non-handle side with a cloth. Then while spinning the rod with one hand & adjusting the angle I would apply layers of glue. In a glass blowing fashion I would mold the shape of my handle. Id use the heat gun to reheat a whole area of the handle which will make the surface smooth as glass. You can also quick cool in a tall cup or tub of water. Using this method you can add different types of glues in whatever order you like giving you a nice layered effect. The smoother the surface cools the more transparent it will be when completely cooled. Its a very fun and cheap material to craft with. I've been using hot glue for all kinds of crafts for years! It all comes down to controlling heat and using gravity to your advantage.
Noice
This was a great idea for me, since I have rheumatoid arthritis and my hands cramp with handles on some tools. This is a great idea for me.
Maybe you could show some of your ideas & methods in a video?
I would have just wrapped it in black tape and saved a lot on cost and a considerable amount of time! Hell, a brand new chisel isn't expensive!
Com tantas opções de cabos de madeira resistentes , será que isso não seria um desperdício de cola quente ? A não ser se fosse a única opção... Né!
If you have access to glue sticks you have access to new handle or item,.....but it was fun to watch, the options are endless. Thank you
Дорогое удовольствие. Из нарезанной на ленты пластиковой бутылки от напитков ручка хорошая получается. Расход только на прогрев уже готовой ручки. Но идея мне понравилась, где-то пригодится.
Compared to the cost of silicon and chisels and the effort put in, it's actually several times better than buying a new one. It's still good, but you also created a video to get attention. It's great. Wishing you continued success.
Thank you. Good to know. From BC, Canada 🇨🇦
УМНИЦА!!! КЛАСС!!!
У МЕНЯ ЕСТЬ СТОЛЬКО СЛОМАННОГО ИНСТРУМЕНТА.
усложнили простейшее дело ..чтобы сделать такую ручку к клеевому пистолету нужен только кусок фольги ..и вообще можно не тратить деньги а получить более красивый вариант из цветных пластиковых крышек от бутылок ..
I have rheumatoid arthritis and just to be able to make the handle just right for my hands will be something I will be doing from now on. Thank you for sharing your ideas. Very clever 👏 👌
Вообще то это была отвёртка! И от неё просто отлетели две накладки из дерева,формирующие ручку! Такая вот была эстетика!
Кусок пластиковой трубы под пайку отрезать и наполнить тем же клеем было бы проще.
Now that I know adding baking soda to hot glue dries hard I can think of quite a few things to do with it.. Thanks.❤
Super glue works too, for the file drill a small hole into a golf ball, then pound it in , works great and easy on the hands
I'm a minute into this and I'm pi55ing myself ......
I can't watch anymore
but I must try....
...... you owe me 4 minutes
Когда некуда девать клей!Не проще ли расплавить пластиковые крышки от напитков и сделать так же ручку?Думаю,что будет дешевле и прочнее🤔Нет?
И красивее если разноцветные.🤓
Point is: over 4M views= money to buy a set of golden chisels 😂
Из эпоксидки крепче, красивее, да и дешевле.
Tip.
Put the pen on the line first.
Then bring the square to the pen 😉
I would not waste my glue sticks on this. If im in a middle of a project its quicker / easier to buy another.
And this is coming from a person that likes crafting/ putting stuff together.
سلام کار شما فوقالعاده است من از ایران برنامه شما را تماشا میکنم شما شاهکار خلقتی آفرین به شما
Baking soda is great with all types of glues, you just have to test it with different glues to find out the results. You will be surprised which work and which don't. 👍🇮🇪💚🙏🏼
А не дешевле выйдет новый инструмент купить, чем такую ручку? Клеевые палочки не дешево стоят.
Данное видео создано для просмотров. 🤠✋😁
I used E6000 on my spatula handle using tape for the shape of it. Worked great, and i use my spatula everyday.
бруски даже не прилипли, сомневаюсь в прочности ручки. мира и добра всем всем
Вместо термоклея намного дешевле и эффектнее было бы расплавить все золотые, серебрянные и платиновые изделия в доме для такой ручки, а для электроизоляции дополнительно обмотать её матерчатой черной изолетнтой в 6 слоев.
Не надо умничать,человек сделал и поделился-а вам не так!покажите лучше!-а критиковать все умеют!!!
@@user-lz3wg1qs4h В истории Великой Руси всегда было 2 критерия оценки: цена и качество. Никто не отрицает подобного решения задачи, но не такой ценой: и на телеге можно ехать на квадратных колесах, однако этого нет в жизненной практике, т.к противоречит закону созранения энергии!!!
Очумелые ручки!❤
Creo que esa mezcla podría tener infinidad de usos en manualidades y artesanías. Muchas gracias!!!!!!
yes yes suitable for iphone armored case
Eso es asi
Золотая ручка.
Овчинка выделки не стоит
Thanks for making the effort to produce this video, and the simplicity is the best part of it
А палочки то не дешевые да и работа купите новы инструмент и не морочьте людям головы
Excellent idea I love it and have several chisels I need to do myself thanks for sharing. On a side note you could also add food colouring if you want to be fancy 😊
next idiot
Wheeze a clever boy then. Wow an excellent application, am so impressed.
Открою секрет. Карандаши клея обойдутся в цену нового долото.
Каждый сходит с ума по своему.
Could be useful but tools can often be bought cheaply. Even quite good ones.
I’ve considered doing something similar to make a replacement handle, but with melted down HDPE instead. However, sanding it down to smooth it out creates even more microplastics, which I’m not eager to contribute to as there is so much in our environment and bodies already, so if I do, maybe I’ll mold it by hand instead. I do love finding more uses for things that would otherwise be thrown into the landfill and repairing things with what’s already at hand.
I can’t believe the hater comments posted. Thank you, sir, I would make one if had the tools. Keep up with your imagination
Che bello, adoro l'autunno ❤
Thank you for sharing this tip.
I will try it to make new handle for knife.
Using a newish chisel to spread glue? If one of my kids did that I'd go loopy, let alone an adult!
Sig Wong 2 part epoxy resin. If you're able to invest in glue sticks and see this, get the resin instead. this is accidentally a neat little molding course fit with a mold box and all haha well done. hot glue dried doesn't come even close to how hard a 2 part epoxy is. I love the recycled tool use though.
This would be better aimed at making easy grasping handles for tools, eating utensils, toothbrushes etc. You could also make a cool faux antler handle for a knife
Sand paper vs glue stick? Stick wins.
Nice, you just don’t wanna leave it in the window on a hot day😳
Gracias genial
I'm not sure how the glue and baking soda would work, but I like this idea using epoxy resin instead and maybe turn it on a lathe or drill press to shape it.
Better idea Jeff
Resin often doesn't stick to things the way you might think.
If you haven't yet seen the resin, lathe videos you are in for a treat. See you in a couple of months
@@kathyjones274 there quite literally is no commercial adhesive even in the same league as 2 part epoxy. epoxy resin chemically does a lot more than you think. I'd be curios where your troubles are with it - but it's also fairly simple to use but there are scenarios it won't work as well. This is not one of them. it's made to do this usually with a shaleD of atleast 80. That's work site hard hat material by comparison
Поймал меня на заголовок, просмотрел эту туфту.
От жеж цука 😂
Seem like a good idea at the time ... until it stay in the car on a hot summer day lmao . I believe there is better alternative that don't Melt so easy . i suggest you use gaffer tape to bring it to desired size and coat it with few layers of Dry Fast rubber .
I liked the bells made out of old cans. Definitely making those.
Золотая ручка😂
This video triggered a lot of craftsmen seeing that chisel being disrespected like that. Like you don't have a putty knife, or Popsicle stick...
¡Genial! Ponerle mango al cuchillo. Gracias por compartir este vídeo. Saludos desde Perú.
Mucho trabajo para un simple mango de una erramienta se puede hacer más fácil sin utilizar tantas otras erramientas que a veces no las tienes,Pero igual esta muy bueno el video amigo saludos de Carlos de Montevideo Uruguay 🇺🇾🇺🇾🇺🇾
well, that's 4 1/2 minutes I can't get back!
Hey! At 3:06 you have a toy tank for your kid!
Por dios si expandimos el cerebro nos damos cuenta de lo fácil que podemos reparar con esta mescla por ejemplo la montura de un lente roto,sellar un orificio en la pared,unir un objeto de porcelana rota,inclusive sellar para siempre las manecillas de los gavetero para ropa y mas.gracia me gusto el vídeo.
buen video señores ,no conocia esta aleacion, gracias
What’s your next video on,,,, smashing up a lifeboat and making a raft out of it?😂😂😂😂 hilarious.
🤣
😂
58перевести@@Chief_runs_with_scissors
😂
😂😂😂😂😂
наверняка на заводе ваз работает, многое проясняется😅
You know know why only few people know, because even fewer care.
😅Мне одной жалко столько клея потрачено😅можно было сделать из другого материала,😅а клеем заклеить 👍😅
Muy buenos tips pero yo no tengo esa herramienta.
Лучше бы на отвёртку "родные" деревянные щёчки приклепал, хорошая была когда то отвёртка... А вот зубило никакое, ну если только медный провод рубить, который обычно все перекусывают, удобнее как то, тем более бокорезы есть .
При обработке, наждачка не забивается клеем ?
Цена новой отвертки и цена клеюших карандашей? В России говорят так:"когда коту нечего делать, он лежит на диване и лижет свои яйца"
Thank you for sharing ❤
So it turns out that glue sticks are made of glue and you can use them like ... glue.
i remember a while ago my mother saying what, you mean _whole_ glue stick is glue, it's not just the inside?
Who knew?
Век живи век учись 👍 🇬🇪
بسیار سپاسگزارم جالب بود
I would buy a new chisel before I'd do that.
My god this is the equivalent of extracting caffeine from Excedrin to add to decaf coffee.
Эпоксидкой залить - меньше возни.
100% !!!
**GLUE YOUR BELLY BUTTON SHUT WITH SUPER GLUE!!**
What would the final product have been without the baking soda?
Nice idea, but I am very busy. I appreciate when I leave my work I will try
Good idea. I imagine it fits anything that has a broken handle. Depending on the price of a new one, you might be able to save a lot of money, so thanks for the idea.😁👍❤️
Exactly
WHAT? You speaking Martian. What was that?
😅😅😅😅🤣🤣🤣🤣🤣🤣🤣😂😂😂😂😂😂
Super idée, mais moi je fais les manches de mes petits outils avec le polystyrène, et sa tient super bien
Mind high temperature. I used hot glue to fix the gear changer handle on the rod, in hot summer it melted, I finally used superglue.
You could have chucked it in a drill and turned it like a lathe using sandpaper. I would have been afraid of gunking up my grinder wheel with the glue. You also could have hit it again with the heat gun to soften it a bit so you could grip the handle tight and made it ergonomically yours.
Respuesta por favor en españolsu traduccion
"Mind = blown! I never would have thought glue sticks could be used like this. This video opened my eyes to a whole new world of DIY possibilities. Thanks for the enlightening content!"
А можно просто в лесу спилить сучок, дома просверлить в нем дырку, влить туда любого клея с питьевой содой и вставить хвостовик любого инструмента. Даже ножниц и плоскогубцев. А снаружи-обкрутить проволокой и изолентой для прочности.
Thank you for video good good
Hmmmm...😮 I just may try this hack 👍Thanks for the tip 😁
If you cannot put a wooden handle to your chisel you do not deserve to own one
Слишком затратно. Проще сделать из капролона и посадить на эбокситку. Мы всегда так делаем. Ручки для стамески, долота. Получается очень хорошо.
I think this is supposed to be a joke. Who would waste all that time and money on a broken chisel? But then, I don't have much use for chisels. lol
thank you.
Вы серьезно ,клей жалко переводить на старый инструмент ,дешевле купить новый
А может надо было ручку из одной из этих деревяшек сделать? Сильно дешевле клея
Una vez enfriado resiste el calor?
Mi papá hacía los mangos de éste tipo utilizando el envase plástico de sachet de leche. Y también quedaban re bien