How To Install A AC Compressor Clutch On A Nissan Rogue DIY!
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- AC Compressor Clutch Install On A Nissan rogue DIY
Amazon Link for purchase AC Compressor Clutch
amzn.to/3JJ3jJ4
amzn.to/3ZSOIAr
AC Compressor
amzn.to/3FtVeFw
AC Puller Kit
amzn.to/3LwE4ed
amzn.to/3n0FvYg
AC Clutch holding tool
amzn.to/3JMHHve
3 Jaw Pullers
amzn.to/3LwsEr2
Snap ring pliers
amzn.to/3JK0beX
#howto
#diy
#nissan
#airconditioner
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
The 2 spacers are to set the air gap on the new clutch and you may not need them both. With both spacers in, measure the gap between the plate and pulley with a feeler gauge. Not sure what the Nissan gap should be but if the gap is too wide then your new clutch will probably not be working in a few months. If the gap is too small the compressor could try to stay engaged all the time. Don’t just throw them in there because the other one had two.
Very informative and straight to the point. A pleasure!
Awesome! Thanks for watching!😊
This was so helpful. Thank you 🙏🏾
Thank you and thank you for watching!😊
Very helpful and easy repair!
Highly recommend a pulley remover tool which you can loan from your local auto store. I managed to get mine off without but it caused quite a headache.
Definitely keep the extra spacers as well. I actually ended up needing the two new ones olus one of the old ones.
I'm decent with tooling and probably a 5/10 woth cars, and this took just over and hour to get done, having the pulley remover would have probably put me well below the hour mark. Having an extra set of hands also certainly sped up the process, as you can get to different parts of it from the top and side in a 2012 Nissan Rogue
Definitely! The right tools for the job always make a big difference!!! Thank you for watching!😊
Hey man it was awesome, helped me a lot with my first AC clutch project. Thanks!
Wow that's so awesome to hear thank you so much and thank you for watching!👍😊
very nice and simple to understand video . thanks !
Awesome! Thank you and thank you for watching!😊
Thank you.. love your contnt, im from NY also now in CO. Il be doing the same thing mines stpped working during the summer but it got cold quick here so havent bothered to fix it. 😅😅
Awesome! Yeah it's really not too bad, good luck and thank you for watching!👍😊
You do a good job explaining things, however you show links to a lot of tools I did not see you use. This makes me think I am missing something.
Your not missing anything the other tools you may need if yours is stuck on and won't come off with what I showed using!!! Thank you for watching!
Great job. I just honed into my issue, it was the same problem. What year is your rogue?
Awesome! It's not that bad you got this!! My rogue is a 2009! Thank you for watching and good luck!👍😊
@@WhitehouseFarmVet thanks! 2013 rogue here. My family always tell me to trade in the rogue for a new vehicle….. but I think I’m going to drive this one into the ground while I still can :). Thanks again.
Lol I'm the same way lol cars are the worst investment at least we don't owe anything and making car payments every month that can be as much as a mortgage!!! I'll do a little work here and there to keep it running good for as long as I can!👍
What year is your Rogue?
Also what was the little thing you pulled out with the needle nose vise grips?
It's a 2009 rogue I believe 2008 to 2013 are the same, I pulled the shims out they look like washers! Thank you for watching!👍😊
@@WhitehouseFarmVet ok Thanks. A coworker has a 2014 with the same problem. I think the process is the same but I'm not sure since I haven't had a chance to see it yet. Thanks for the info and for the awesome video.
Awesome thank you! and thank you for watching!👍😊
It looked like the clutch was spinning with the pulley when you first put it on without the belt. Isn’t the clutch supposed to be disengaged from the pulley?
Most ac clutches are supposed to spin freely and also with the Compressor and pulley while engaged!! Good question though!! Thank you for watching!👍😊
@@WhitehouseFarmVet @13:35, you install the clutch plate. Maybe it’s me, but it looks like as you’re spinning the pulley, the clutch is also turning. The clutch should only turn when energized.
Hey Tom yes it's supposed too! Watch around 4:30 when I'm taking the belt and clutch off the pulley also spins freely, I know it seems confusing some vehicles do and some don't ,you can Google it for types of vehicles, but I totally get what your saying one should not move without the other unless energized but that's not the case! Hopefully this helps let me know buddy!👍
@@WhitehouseFarmVet one last question, I’m working on mine now and I cannot get the clutch plate off because the compressor is spinning with it. Is it reverse threads? I can’t get enough impact to break that 10mm bolt free
Try soaking the bolt with penetrate then take a Torch and heat it up good then spray it again while it's hot then use your impact it should brake free then!! Good luck buddy let me know how you make out!
First!!!
Lol 👍👍👍👍
What tool was that one you used i have not seen before? To remove the bolt I think?
To Remove the bolt I used a little impact drill gun I think that's what you were talking about, let me know and thank you for watching!👍