ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
WELDING REPADS 6010 ROOT 7018 OUT FUN BUILD LEARNING
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2019
- Welding on a long neck flange with a repad. Iv never done this is the feild so here is my first one ever with 7018. In the shop many years ago I built hundreds of vessels with repads much larger and smaller then this. We would do them with METALCORE and hardwire mig. Never ever did one with stick so this was fun. I also never had to do it in position. I always had them on a roller to make it flat and a perfect weld. Most of the time I'd say 99% of the time I had to do a lace weld on them with hardwire which I want to make a video of and show you how I did that. Not sure if they are done like that anymore. But I will still show you. It will have to be a arc shot video to show you the perfection of it. I will get to the arc shots but right now is all teaching without. So follow along and listen up to the followed and advised steps.
Shop my gear
wallyzweldingw...
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 66 [ซับไทย]](http://i.ytimg.com/vi/qcaUguFlwdM/mqdefault.jpg)
You have to love welding to watch 1/2 hr of melting metal, I watched the whole vid. There is always something
to learn.
🙏👨🏭🔥
Same here I have watched whole video, because each and every word is important information
Amen! They say a picture is worth 1000 words. I got more out of watching this than reading chapters out of any book on the subject!
@@patrickfarley8036 thank you got tons more coming
Nice work! But I don't know how these guys do this all day everyday. I like to weld occasionally but this would be way too tedious for me.
Awesome videos man. Thanks for not adding the unnecessary music. Your detailed commentary is gold for us learning (and your motivational tips!)
Thank you
We finished up some 20" saddles off some 42" cooling tower stuff and it looks beautiful this video is what it takes to learn more and show others thanks for everything you do WELDLIFE=GOODLIFE
Great life ❤👨🏭🔥
This is one of my favorite welding videos ever. Seriously, this is bad ass start to finish. Good stuff! 👍
I love have you take your time to like each comment.
Thanks for sharing this with us.
Very respectable that you take a pride in what you do.
So many of us don’t...
You sir have golden hands, wish you all the best!
Hey Professor, I'm a recent grad from a trade college in Canada, ON.
Just wanted to let you know it's awesome you make these videos!
Also, I wanted to let you know that trade colleges use videos like this in class as examples,
I've seen a few videos in class of you, bob moffat, and the guys on weldtube.
Being able to see someone fit and weld something out in order, before attempting it yourself really helps out!
I would like to be able to see the arc shots better though, like see the puddle.
Keep up the good work, your a great welder.
Thank you. I will add them soon. I'm just getting started. Got a film crew joining me soon.
Vous un champion
Все очень четко, точно и аккуратно. Браво. The best welding!
Thank you
EXCELLENT VIDEO,I'VE WATCHED IT 3 TIMES NOW,I'VE ALWAYS ENJOYED WELDING EVER SINCE I GOT INTO IT,1980-DALLAS,TEXAS.IVE BEEN TO TWO WELDING SCHOOLS INCLUDING PIPE BUT ALWAYS KEPT A OPEN MIND.AS MY GRANDMOTHER TOLD ME YEARS AGO,"LEARN ALL YOU CAN"! SO I'M ALWAYS WATCHING SOMEONE WELD,FIT/LAYOUT PIPE OR BOTH EVEN THOUGH I'VE GOT ALOT OF BOOKS ON PIPE FITTING,I LEARN BETTER BY WATCHING SOMEONE.KEEP UP THE GOOD WORK AND DON'T STOP MAKING VIDEOS!JOB WELL DONE!WOULD OF LOVED TO OF BEEN THERE WITH YA!
I was a welder for about 11 years but gave it up because it started to mess up my vision. I still love the process and watched this entire video and it brought back a lot of memories. I agree with Joe I was always my hardest critic when I would weld and a welding instructor told me once, " As long as it's up to code with the job your good." We welded jobs that required full penetration welds that were later inspected and all the failures were because of porosity and improper cleaning between passes. I would concentrate more on that than the appearance. That comes with experience. Keep burning and pay those bills!
Prof this is one of your best instructional vids, fill with copious explanations on what, how and why you are doing what you do instead of just watching you burn rod. I learned alot. thanks
I have 40yrs in this trade and have seen a lot of welders you are at the top . Stay humble and kept burning and kept up these videos
7018. Gotta love that sticky rod. Used to hate it back when running the old Lincoln Idealarc 350 box. My inverter box runs it like a dream.
It's not bad
Awesome job sir. As a welder you're own weld never seems perfect could always be better. Keep burning rod bud....
So true 😂🔥👨🏭❤
I usually use a bottle Jack and some chain to fit the collar. Mainly cause it’s be small, light and portable. Also helps if you gotta lay some wood down in a hole and Jack up a valve or something ya know. Cool video man.
I like that idea
I like that at least he was honest about his mistakes I'm an ironworker doing hospitals adding additions like 5th 6th and 7th floors small-time welding nothing like this it was interesting enjoyed the video thanks buddy
👍👍👍👍IRONHEADZ
Amazing... I do hope my colleagues catch up on this video... I love it though,, woman welder here from Philippines 🇵🇭😊😊😊
I'm about to be going to school for welding and really nervous about learning all the processes besides stick I got to open root in high school for it but watching welding videos I see I got so much more to learn
Definitely alot ro know
sam zaiko I 100% recommend going to school for welding. At my school I’m getting an associates degree but besides that it’s a 16 month course 4 semesters 4 months each but I love it. I’ve never made such a great decision before, I welded stick and then tig to try it out there and I loved it and never ever regretted anything about welding. Have fun and there is definitely a lot to learn. I’m just now doing pipe in my 3rd term.
ERES UN GRAN MAESTRO SOLDANDO TE FELICITO MUY BUEN VIDEO Y MUCHAS GRACIAS POR LA GRANDE INFORMACION EN ESTE VIDEO Y MAS QUE TODO POR REGALAR TODAS ESTAS LINDAS LECCIONES DE SOLDADURA CHAO
Dood!!! You have Helped Me more than Anything I so dagum appreciate this. I gotta buy a new grinder today.....Much Love. Thanks
I'ma teach all I know for you guys
Thank u so much we learn a loooooot with u 🙏😇 continue pls
Absolutely
Thanks for more practice with my eyes wich can makes me good when I reach there.
Like that you are showing flanges and fittings and fitting from start to finish great job.
Refreshing to see the workmanship, drive to improve, and the tenacity it takes to come up in the welding trade. A rare commodity in the present generation, where instant gratification and excuses rule. We need more with an attitude like this skilled welder, many more...
Am a fan of mig/mag there is where I perform my magic but this video makes me fall in love with sticks welding its nice I will to experience I knows how to weld with sticks but as good as this guy
Good morning aweson ceri nice worck cling and nice a good profecional jobs.
I miss stick welding since finishing welding school. So far my only welding job has been 99.99% FCAW, and we weren't really welding all that much because so much time was spent on fitup and other assembly duties. Have an interview tomorrow for a new job that I was told will probably be soldering mostly, with some welding work on the side (hopefully TIG). But it was always sorta relaxing with my back up against the wall in the welding booth at school, laying out 6010 roots in grooves and filling 'er up with 7018 while jamming to some thrash metal.
yeah that undercut is a bummer...still much better than i would do. this is good information for people starting out, or trying to get better. decades of experience is the only way to be a master, and even then there's always more to learn!
Nice, from an old retired union steamfitter. Carry on.
🤘
Check, double check, triple check, great video 👊🏻
Very nicely done. I am learning from youtube videos and appreciate quality videos like this one.
Very nice. Nice job fellas. 👌😎
Very informative video there are a ton of things to learn from pipe welding no matter if your on the pipe line or doing other pipe work there will always be something new to learn!
Alot of good information. I like when you explained the 7018 moving in an upward weld, not down cause of slagging. Cool🙂
It's all truth gotta show it all not just skip ahead
Born for welding👍God bless you & your fami✌
🙏👨🏭❤
A lot of time setting it up and fill welding I like it thought you did real good look nice and clean.
Thank you 🙏
I absolutely love your detailing and not to forget the finishing
Great job my friend. You are teaching some of less experienced. That speaks volumes about you as a person. Great guy, great knowledge, a great instructor. Thank you for sharing you knowledge. You have mad skills brother.
Thank you appreciate you
Awesome job, you Sir are very good at your craft!!!
One important thing you forgot to mention, but accidentally got a decent shot of @ 22:50. Off set your stop and starts, like a brick wall you never want your start and stops on each other!
Also, if your slag peels itself up from the start of the weld as you go, you are almost perfect. Good angle, pen, travel speed, ect. It peels itself up when there is no undercut or porosity for it to cling onto that you have to wire wheel out!
Cool
Thank you Wally for sharing, specially since I work in a heat exchangershop 👍👍👍
Any time I never mind helping
Toda terminacion en plano con 5/32" queda exelente,lo que observo en el video... soy soldador y aplico las mayoria de las veces esta soldadura...quedan exelente los cordones.🇨🇱🇨🇱🇨🇱.
These kinds of videos are that good good man. Thank you for the insight
Take that as a no lol ?
Your videos are very educational and very professional thanks for sharing your skill
Stacking beads, have to love it, turned out great.
definitely liked it , would like to see more, potentially add a back story of location and why you are there.
looked like you was in a shop of sorts
I like watching these kind of videos because you show step by step helps me learn how to do it the correct way instead of trying to figure it out (Thanks) man...
Loved this video Brotha , a lot of good tips for some of us novice hobby welders . I ran my own auto/ diesel repair and diagnostics service Corp.in AZ for over 17 yrs. During that course I occasionally needed to weld things. Never got trained just learned as I went along. Asked many machine shops and others on how to weld cast iron and was shocked people telling me it couldn't be done. So 1 of my early customers was a US veteran and journeyman pipefitter . He had just retired and taught me how to do cast iron welding with those crazy expensive rods specifically for it. Was around 2002 . Still recall his lessons like it was yesterday. Short welds and ping the ends . Long welds will result in cracks. Always ping the shit outta it he made clear . Look forward to all your Vids TC 👍🏼🔥🔥
Machine shops are hella dope
Thanks for the good knowledge been doing it along time on some 42 inch again tig root and hot pass 7018 cap always a pleasure watching you work
Better than anything on TV! Thanks for sharing.
You do top notch work. I wish I could have learned how to fit and weld pipe CORRECTLY.
I got you
Great video. Almost makes me feel like I could do it even though I've only done butt joints and flanges. It makes me really miss burning rods since I work production and mostly only get to use the squirt gun unless I get to fire up the TIG for SOME stainless or aluminum orders. You don't have the fancy camera gear or the lensed arc shots but you more than make up for it with knowledge, passion, and positive attitude!
Hi wally im from south africa.Im a pipe welder.Thank you so so much i love your vidz and learn from them cheers👍👍
Thank you
Awesome sir, I picked up a bunch of little things from this video, appreciate the content
Right on thank you. Just some knowledge I have to pass a long. I dont know it all but what I got ima share it all.
I'm a senior piping designer and I watched the whole video, lol. I don't even weld, but it's good to learn a little bit to improve my design. I've seen a ton of welds, and the only perfect weld I've ever seen were orbital lol. Those beads look good to me bro.
Yeah, I can definitely see the artist. Maybe showcase some of that metal art when you get a chance. I enjoy watching Barbie the welder and she turned me on to the metal art scene.
Yeah she is BA
I really appreciate these kinds of videos Wally. They will help everyone starting out in this trade. Keep the videos coming
Real knowledge, and the ability to express it to us, Really Great Video, keep it up, best video on the tube. Thanks William.
Excellent. I know you had a ton of work in that video. Thanks👍
I hit like before it started because I always like what you do
You to good be good my G
Awesome man. Glad to see people shooting for perfection on that last past. Always killin it!
Watching your videos makes me wanna get out of retirement and getting myself a nice arc welder big enough to burn 1/4” steel. Yeah, I’ll do that. Super clean welds my friend, keep on trucking.
Great job young man. Thanks for carrying on the welding tradition.
Nice work. Instead fitting that up vertically and eye-balling the two hole; roll the spool 90 degrees and fit-up the branch horizontal with Jack stands. Easier fit.
Sometimes not always I have my methods but I do all
Kinds
That split Tee on the live line was cool, but this is way cooler. All the layout and fab stuff you don't find anywhere else on TH-cam.
Anyone can show pretty arc shots. But the knowledge behind how that setup is constructed is how we know you've actually got the skills you say you do
Man, thanks for showing the layout. Whenever someone who knows more than me cares to share some knowledge, I'm taking notes. Keep them coming.
Great video. Can't wait to see some arc shots so we can see some puddle action. That's where I'm struggling right now. Not really knowing how my rod should be with regards to my puddle.
Hi!! I’m from Brazil!! I very like work your work with welding!!
Much respect 👨🏭
Thank you for making these videos. It is so fun and gratifying getting to watch someone, highly skilled, practicing their craft. I don’t think I would ever be able to do what you are doing but it’s cool to see how the pro’s do it!
Would be awesome if you put a 10 shade lenz on the camara wen welding i would love to se all the movement.
Yes exactly!
Yes
Nice one wally, that last pass is hard not to get under cut hey. Could you have a slight weave and pause on the top of the plate to combat that under cut. It looks like it very fine line between tie in to the edge and under cutting it .
Thanks for the video and the step by step Bro, PEACE !!!!!
Yeah I shoulda let it pile up more. I think if I was to do it again I'd tilt the piece and take more of a up hill position to accomplish that.
awesome video, i like the fact you don't hide that things you might mess up on or aren't up to your standards. Super respectable man
By far the best welder and welding channel on TH-cam. Keep it up man. Thanks for the knowledge
😍👍
Damn those are some good welds. Im in collage for a basic welding cert. You talking through what you are doing and why you do it that way is very helpful for me.
Cody Sawiller All the best to you. My son is in welding class and at 57 I'm looking forward to learning how to weld.
Great to see someone else that realizes, how much a level is their friend, excellent video, thanks
You are a very good weldor but never stop being your own toughest critic and never stop chasing the perfect weld. These things keep you hungry and improving. Stay sharp brother man!
Always and never thank you appreciate you
Extremely well done.
Just welded my first pipe today just remember most of the things you say on your videos . Because my welder doesn’t want young kids to make money but that ain’t gonna stop me 💸💰
Keep it up it will take you far in life.
Production welded for a little while. Have wanted to get into real stuff since. Thanks for the instruction! You do a great job with both your beads and content! Keep it up and thank you!
It would be great if you had one of those cameras with a special filter to watch the welding movement, but I still think you have excellent explanations of how to do the work.
Oh I do tho. Just haven't played with it yet
@@TheWeldProfessor
That's the kind of videos I'm looking for. But not many aroundwhere you can see the pool and flow of metal
s
You are Cool Very Honest I Like That I try to be like that every time 👍👌🏻
Great 👍🏽 you are and the video is well done. Now I cannot wait to burn my next box of rods.
Thanks for being straight up, show your skill and see who will pick up on it. Your style is appreciated.
- canada
If i learned one thing start from bottom work up in quarters all day long love it God bless
Nicely done brother thanks for share those cool techniques be safe and keep burning them rods
Oh you bet no problem. You already know I love to weld. ❤👨🏭🔥
Prof, your step by step vid and the explanation is awesome. This is how individuals learn. You have become the #1 Welding Videos on U Tube. You are the Professor.... Best Wishes.
Awe man that means so much thank you. I respect that. Doing my best trying to separate myself from the rest of the channels
Brilliant I learned something that tip about 1/8" each side of center for the curved edges is awesome that's always screwed with me and end up making a mess thanks!!
Old mate cutting your hole needs to keep his torch the same angle as he has at top level of pipe through out the cut as the cutout will be parallel to centre. Also why not thow another outer circle on your mark out with the dividers and throw the torch on a 35° angle keeping an eye on that root face and cut the weld prep in with the oxy. Keep blazing mate yewwwww.I'm a boilermaker/welder from OZ
Thanks Wally I'm learning lots from you
That's great to hear thank you
Love your videos and your energy. Keep then coming. I'm a garage hobby welder I'm getting good with 6011. Its fast almost as fast as mig if you don't have to change rod and run it hot. Bsafe dude
You be safe too accidents happen at home too be sure to bleed safety into your life it’s a dangerous world
The way your welds come out got me wanting to get a miller pipe pro 400
Thank you for this and all the videos you have about welding I have just entered into the field of welding and you have given me a view of what to expect as a welder.
This is real world welding youngin’s sometimes you gotta live to fight another day . Not about not taking pride in your work , sometimes “ good enough “ has to work just for time constraints but this is still very good , quality craftsmanship. Nice job 👍🏾
Awesome video dude. Showing every step, even the little things.
Excellent. Great info all the way through. Love it.
Thank you
Great step by step how to. Informative video. End result was phenomenal. Keep up the great work 👍
One thing everyone needs to learn. Dont focus on one thing too much.
Like the squareness and it being level. You can get caught up in it real quick
HiI have always believed that when we want to get a good weld, it needs to have a great fitter ،cuting oxigen very nice 👍 we saw the root very very beautiful
Thank you
Buen trabajo amigo , eres un cracs en el mundo de la soldadura .me gustan tus vídeos porque así voy aprendiendo yo tambien , un cordial saludo desde Canarias
Great video, you know your stuff. I do wish you could implement a lens on your camera so we can observe your bead technique. Your beads look great , some might like to see how you make them. Thank you and have a Blessed day.
Good video man, very informative, I usually run downhill but after watching ur videos I want to get into running that 7018
Great video! great job