DIY Balance Board with Walnut Inlay // Rail to Rail // Easy DIY Project // Quick DIY Holiday Gift
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2024
- This balance board is a super simple project made of plywood and PVC pipe. It makes for a great easy DIY holiday gift, the kids will be happy and they'll be getting some exercise too!
Video sponsored by 3-IN-ONE® Lock Dry Lube. Watch a short video on my Instagram channel of 3-IN-ONE Lock Dry Lube in action as it saves my back door lock: / bqxwf8_birb
3-IN-ONE Lock Dry Lube loosens, lubricates and protects all types of locks, from interior and exterior door locks, car locks, padlocks, marine locks and more. With the attachable straw you can easily reach into the narrow lock mechanism or use the wider spray from the nozzle to refurbish and protect the entire lock. 3-IN-ONE Lock Dry Lube dries clean clear and is safe to use on metal, wood and most plastic surfaces. Learn more: www.3inone.com/products/lock-...
3-IN-ONE Lock Dry Lube is available at The Home Depot and other retailers nationwide. Find it at The Home Depot near you: www.homedepot.com/p/3-IN-ONE-...
Follow 3-IN-ONE on Facebook ( / original3inoneoil ) and Instagram ( / 3inonebrand ) for more DIY tips to help get your projects done.
Free Printable Plans - www.3x3custom.com/tutorials/d...
Router Edge Guide Video - • Easy and Accurate Rout...
The board ends up being 41" x 14"
_____
AMAZON (Affiliate) LINKS
Holdfast bench clamp - amzn.to/2rqugbo
Microjig Grrr-ripper - amzn.to/2Ei9K5w
Hand Saw - amzn.to/2QidgmH
Shelf Liner - amzn.to/2rnzpRt
Carpet Tape - amzn.to/2Egd4Op
TOOLS PROVIDED BY THE HOME DEPOT
DeWalt Jigsaw - homedepot.sjv.io/rao9d
_____
FOLLOW
Website - www.3x3custom.com/tutorials
Subscribe - www.youtube.com/watch?v=19JLU...
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, clicking on them helps me continue to make more projects :)
Some tools used in this video were provided to me, all opinions are my own. - แนวปฏิบัติและการใช้ชีวิต
![[안방1열 풀캠4K] 베이비몬스터 'FOREVER' (BABYMONSTER FullCam)│@SBS Inkigayo 240707](http://i.ytimg.com/vi/_2HL-ogzzBU/mqdefault.jpg)
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
In your previous video (the router jig) promised you that I'm going to make a similar one and if it works with different bit sizes I will subscribe to your channel ... guess what ???? You have a new subscriber ... good build :-)
Hahaha! Love this. Thanks!
One of those videos where im initially jealous of your shop. When in reality im jealous of your organization, cleanliness, free time and most importantly, your skills. This is impressive
She looks very good on a balance board!
Project came out awesome! Love the inlay ... such a nice touch. It's cool the board can work in the X- and Y- directions.
Thanks! Yeah one way is easier than the other so it’s great the little kids can use it too
Awesome and straight forward build! Plus, I have a cornhole set on my to do list and inlays like that would look slick! Thanks for all you do Tamar!
Oh! That would look awesome! Glad it was helpful! Thanks!
Great job on the inlay! I love the contrast!
Thanks so much! Me too! I didn’t want to cover it with grip tape. Ha!
Great general woodworking tips even if not building the board. Thanks for the video.
Glad you found it informative!
Tamar!! You are very talented!! Your videos are encouraging!
The thin strip jig is awesome. Looking forward to the video on how you made it. Thanks for sharing your skills.
Awesome. I’ll work it for next week!
That turned out really nice!!! Back when I built my son a balance board for skateboarding. I used a 1X6 and a pvc pipe. Nothing fancy.... I love the inlay you did also!!!!
Thanks! I debated painting the design on but inlays are More fun. Ha!
It's amazing. I loves to see your whims datails and finish.
Thanks so much!
Super fun idea! And so handy for when you can't decide if you want to go surfing or stay at home playing video games all day.
Ha! I’m a mom of 3 so I never have those days.... but yeah! Thanks!
The inlay looks amazing. Fun toy for the kids.
Thanks!
Awesome build, I like the design of the board a lot! Reminds me of a surfboard
Thanks! That’s what I was going for!
Thanks for showing & sharing that
Great job!
Thanks!
Very cool. Will plan to build one of these!
Have fun!
Your videos always crisp and to the point. Glad to see you getting some sponsors.
I glad too! Ha! Thanks for the feedback!
Very cool piece! I love how you mimicked the lines on your logo.
Thanks! Yup! That’s what I did!
The finish always makes the wood come to life, but that was awesome! This was a super fun project to watch and you make it look really attainable! 👍🏻
I liked that part of the video too ☺️ thanks so much!
Power tool woodworker using holdfasts? Gasp! Love my holdfasts. Cool, simple project. Nicely done.
Haha! They are so much quicker and easier than any other clamp I have
Loved the inlays ideas, opens the door to endless possibilities. Very well done Tamar.
Thanks so much! Totally agree. Excited about it
Thanks great job
I wish I could like this video twice...
Nice! Looks like a fun project!
It was fun! Always fun to make stuff for the kids
The router jig is so clever ! Congrats for this build and for your good ideas 👍
Thanks so much! I love that jig
Thanks for the video! Project turned out great!
Thanks!
Great video, thank you!
Glad to hear! Thanks!
You're the Queen of Jigs. Awesome.
Ha! Thanks! Anything to make my life easier
Nice work Champ! Super impressive
Thanks so musch I build in sweden my own Board. Got som tips from you. 👍
Cool vid!
I love your projects!
Thanks! This one was fun
DIYPD she’s amazing!
Tamar rocking it as always. You give me inspiration. Now time for me to head back in the shop.
Haha! Awesome! Get to work!
Like always a great looking project achieved with clever use of standard tools and inventive jigs. I so love watching your videos!
Thanks! I really appreciate that!
So cool!!!
And such a great exercise! 😉
Great project. Thanks for sharing.
So glad you like it!
" I wanted to save on paper so i designed only half a template......................" You deserve a double thumbs up for just that statement. Bravo !!!! I wish i could subscribe again and again.
Hahahaha I wish you could too! 😂😂 thanks!
People that complain about CNCs better be doing all their making Wood By Wright style. Great fun project!
Haha! Right?! Thanks!
Wow. Great idea I like how you did the inlays and using the router jig you made. Very nice!!
Thanks! He jig was really useful!
Ok, now I get it! This is awesome, I want one 👍
Ha! Yeah! It’s super fun! I keep stealing it from my kids. Ha!
I want to make this just so I can hang it in my apartment because it's so pretty!
Hahah it’s a toy I actually don’t mind displaying in my playroom!
Very nice board...and feet!
The inlays made an ordinary balance board very special. You have two very special talents: design and woodworking. Your choice of carpet tape worked just fine; FYI for the future - Liquid Nails Fuse*It would have also worked.
Thanks so much! I’ll remember that for the future
You are amazing. Love the vids
Thanks so much!
@@3x3CustomTamar Half way through my balance board
Awesome video! Very well explained too
Thanks so much!
Really cool Tamar! 👍🏻👊🏻
Thanks so much Fred!
This board is beautiful!
Thanks so much! It was fun to do
Yeah, it looks like it... I want to make one now, too!
Kaylee Gallisdorfer do it!
When I'm done with surgery recovery, I think I will!
That came out very nice. I'd like to try also that inlay technique. Looks quite easy but of course can not really say until I try it myself.
It is very easy! Thanks so much!
Nice work!
Thanks so much!
So beautiful, I liked it very much!!!
Awesome! Thanks so much!
А я тебя уже потерял))..интересная штука, молодец!👍 Удачи тебе,в твоих проектах.
Judging by the thumbs up. I’m going to say thanks you!
Great job
Thanks! This was a fun little project
I love your channel and your builds. Don't worry about people getting upset about using a CNC. It is a shop tool. I also hope to have one very soon. Keep the videos coming!
Thanks so much! Yeah I just want people to open their minds a bit. Hopefully the next time someone complains about the use of a cnc I can just point them to this video. Ha
Good project.
Thanks! The inlays were fun
Looks good
Thanks!
This will work out really good for my son. He's a toe walker and it started messing up his tendons so he needs to start stretching out his Achilles and this might actually get him to do it since it turns it into a game.
Awesome. Glad it was useful!
Looks like fun! And a great way for me to break my nose. 😂
Haha! It’s def a challenge for sure!
Awesome instruction video. Loved it, and ended up making my own Balance Board using your instructions, inlay, and all. Must admit yours are ten times nicer than my final result, but this was, to my defence, also my first time using my new Router, so all in all satisfied. As I do not have a tabletop-saw, I ended up using what size of strips I could buy, with the result of having to make two passes with the Router for each groove. Made it difficult to achieve a perfect fit. Next time I will either invest in a saw or buy a Router bit that fits the broadness of the inlay stripe.
Awesome. Sounds like lessons learned fir the next project!
Lovely
I Really like it
Thanks so much! Glad you do!
Good job and funny, thanks for the video.
Thanks! Glad you liked it 😂
beautiful work! you are really good at what you do :)
Thanks so much!
Very cool piece! I absolutely love your design. Definitely would like to try and make one myself, maybe not so fancy though 😋 It would be a great addition to the gym for a fun balance workout.
Thanks! Yeah. The inlay isn’t necessary at all. I just like to make my life hard. Ha! It’s such a fun workout
3x3Custom - Tamar haha 😂 No you do it because you’ve got the awesome skills (and tools) to and cause you can so why wouldn’t you!
Besides there’s only one way to get the fine skills you’ve got and it’s not by keeping things simple.
👍👍👍 Excellent DIY video!!! Fantastic idea!!! 👍👍👍
Best regards from Germany 🏄
Thanks!
Merry Christmas
You too!
Thanks
Getting to know your Jigsaw better !!! It looks Great. You need heat in your garage to protect your tools and keep warm !!!
😭😭😭 it’s so cold!!! This jigsaw is the best one I’ve ever used
It is very cool
Thanks!
thank you very much for the information I intend to buy my next Dewalt tools I already had this very good brand of drill also
Glad you liked it! Yeah this is a Great jigsaw
Nice
I've seen you make half MDF molds, and I find the idea brilliant especially on objects that have to be as geometric as possible, such as skateboarding and rocking. That way with half the mold and with the help of the mill you would have more refined jobs. Sorry for the observation, but not all of us see only the whole work, but also the smallest detail.
Nice work
Thanks!
I love how you’re making a project based on surfing while wearing snowboarding clothes!!😂😂 cool project especially since it’s for the kiddos!!
Haha! I wish I didn’t have to wear my snowboarding gear....
I know the feeling!! I’ll be in mine this weekend in my shop!! 🙈🙈
Preston Daniels good luck!
groovy ;)
Thanks ✌️
Joli travail bravo salut Jeannot 😉🛠
Thank you! ☺️
Top
👍👍👍good
Thank you!
👍👌👏
Love all your videos Tamar. Any chance of you doing a surfboard build video from a kit...?
Thanks. Not planning on it
Beautiful project Tamar! Some surfboard wax might be good if the feet sweat.
Thanks!
I love your work! I will definitely give it a shot!!! How thick is the plywood?
Good information ok thank you
Glad you liked it!
I can't even balance on the floor never mind a balance board!
Haha! It’s such a good work out!
@@3x3CustomTamar the only workout I would be getting would be getting back up off the floor!
animationcreations42 haha! That’s always a good one.
I like to focus more on design, thought process, and problem solving than matching one's method of creating something. If someone makes something with a CNC that I like the design of, I'll figure out how to do it with out a CNC. Might be more difficult to execute, but I also don't have to go through all the designing, tool paths, troubleshooting, etc, so I'm sure it all evens out in the end. Unless you're going to make a lot, in which case, sign me up for the CNC Lol
Rule #1 of internet woodworking, anytime a CNC is used, the have-nots will come out in droves lol I like the pattern, and appreciate the work regardless of whether it's CNC or by hand (though what does that mean, it's still a motorized router, and a guide that only puts you in control of moving it in one axis, so is it really that much different overall? lol) Do it with a saw, chisel and router plane and you'll get comments like "a router would be so much faster", so really you can't ever win :-D
Hahah so true! You can’t win.... that’s how I look at all these videos too. How can I make that work with what I have!
Hello, at minuts 6:18, which oil do you use?
Thanks \m/ awesome work!
I love your videos and your jigs...
Decided to make one for my kids yesterday. I used you templates and it turned out really nicely. Didn't do your inlays (they were too complicated for me), but simple cross instead. I really like the end result.
One question of I may, which oil do you use that makes the wood so lively?
Thanks again, Nir
Awesome! So glad you made it! I think I used wipe on poly here
Love the walnut inlay!!! The video and the thought is lovely.. definitely will subscribe to your channel. I will add anti slippery to the board, an epoxy sand thing will keep the look and give the out come. Thx!
Glad you liked it! Thanks!
@@3x3CustomTamar what was the thikness of the plywood?
Mati Hir 3/4”
@@3x3CustomTamar so far so good... Can't share the pics from the progress. What kind of finish did you use?
Mati Hir wipe on poly
good night, very cool this project, mes says about this new jig saw Dewalt is good ?, And that has not yet been released here in Brazil this model
Thanks! This is the best jigsaw I have ever used
With the 3/4” thick plywood, would it be strong enough for a length of 48” board? I want to make a snowboard style balance board like yours but possibly with a 16” width. What do you think?
Not sure! Try it out!
Why would anyone get upset about using your CNC? It's a shop tool too!
Well. They said they thought they would learn how to do the inlay pattern and we’re upset they couldn’t replicate it. 🤷🏻♀️
The volumes on the shelves are real or dummy? ))) Work as always excellent!
Haha. Real. Thanks so much!
What the plywood thickness? Great tutorial!
3/4. Glad you like it!
hi Tamar, a big fan here, i was watching one of your videos and my wife got in love of your necklace, can you share some information of where we can get it? thanks
Hi! Wish I could, it was a gift from my mother in law. I don’t know where she got it....
What kind of table is your bench dog work bench? The one that you use your hold fasts on in this video
It’s from Armor Tool
Beautiful board! Which plywood did you choose? Is it beech? Do you know "Bredder Boards" from Tübingen in Germany?
Thanks! It’s birch
Build a surfboard!!!!!!! :)
I’ve watched a few videos. Maybe one day
I built a DIY Indo board about a year ago for my wife and used grip tape instead of inlaying it. Even cut her name out for it. I definitely am up for a challenge, and your inlay job was beautiful. Was that a #4 plane you used to finish the inlay?
That sounds awesome. Yup. That was a #4
Awesome job, gotta love the I don’t have a cnc , it’s just a tool or one way to do a task I don’t have one just use different tools. Keep up the awesome work!! Oh check out Periodic Surf co. From Australia DIY surfboards. Jordan is a awesome guy and incredible craftsman furniture to surfboards. Take Care
Awesome. I’ll check it out! Thanks!
im building one of these as my GCSES project, is the inlay easy to do?
Awesome. I thought so.
Always enjoy your videos...rr Normandy
That’s so nice to Hear! Thanks!