Go to any autoparts store and they usually have a scan tool and for your misfire you will see the code for what cylinder has the problem saved a whole lot of money
Mopar already gave there's pregreased. Jeep is weird anything that's electric or significant to the engine you have to use original oems because that vehicle will not run right.
@@kingfreedom1863 it varies based on the vehicle. It could be in the end or towards the middle of the rail. On newer vehicles the schrader valve is not even there. To cut cost manufacturers are not putting them on anymore. If that’s the case you’ll need to release pressure by removing the relay. Here’s a video I did that may help: th-cam.com/video/XX58ZFZLy6E/w-d-xo.html
I highly recommend that you purchase the correct injectors. Toyota camry and Toyota Camry Solara are totally different from one another, if not, and you turn the ignition over will burn your car to the ground because the injector didnt properly seat itself into the chamber (a gap is present)
The dealership wanted an extra $360 usd to replace my fuel injector in my 2014 Jeep grand cherokee after a half hour diagnosis $76 usd.
U pay for time and knowledge ,why didn’t u diagnose it ☠️ knowledge is power
Go to any autoparts store and they usually have a scan tool and for your misfire you will see the code for what cylinder has the problem saved a whole lot of money
Your not showing the rest of the world.
Good video.
Dielectric doesnt damage o rings?
Dijo un poco de grasa y parece que le va a lavar los dientes al inyector.
😂😂😂
For real 😂😂😂😂
Mopar already gave there's pregreased. Jeep is weird anything that's electric or significant to the engine you have to use original oems because that vehicle will not run right.
Silicone grease is better. And much less.
What would the cost be for labor to install a fuel injection system for a Chrysler 200 c. 2015
Too much better if you do it yourself
Is the fuel rail under pressure? pressure
Yes, you need to release the pressure via the schrader valve on the fuel rail
@@PhillipsVision can you tell me exactly where it's located on the fuel rail
@@kingfreedom1863 it varies based on the vehicle. It could be in the end or towards the middle of the rail. On newer vehicles the schrader valve is not even there. To cut cost manufacturers are not putting them on anymore. If that’s the case you’ll need to release pressure by removing the relay. Here’s a video I did that may help: th-cam.com/video/XX58ZFZLy6E/w-d-xo.html
Just alittle pressure will spray once you pull the first one, the rest will not.
I highly recommend that you purchase the correct injectors. Toyota camry and Toyota Camry Solara are totally different from one another, if not, and you turn the ignition over will burn your car to the ground because the injector didnt properly seat itself into the chamber (a gap is present)
Thank god….i thought it was gona he harder
Man she barely fit