Just got mine put in yesterday! Worth it. If you are looking to get one here are my results. All I have is intake and muffler deletes. Instead of the power gradually kicking in and being strongest from 5000-7000 rpm, the torque is shifted to what feels like it’s strongest from 4000-5500. Power does sharply drop off at 6500 now. The car accelerates faster and if you are ok with less power around redline then do it.
I knew you’ll love it! Only thing I didn’t like about the kit was the thermal gaskets. Mines were terribly cut, but I think they got way better with quality nowadays. Congratulations on being FBO btw 🙌. I finally received and installed my RV6 V2 long tube race J pipe yesterday.
Nice man, but remember J series shine at top end speed. In my opinion I would focus more on mod that increase high end torque even though low end torque is nice for dig race.
you can loop out the coolant lines from the TB.. all they do is SUPER-heat the TB and keep it hot which isn't good for power. unless you live in subzero weather, you're fine. i been running without the TB coolant lines up here in the northeast for years and never had an issue!
Yo I got you on the mount homie I use a vent mount for SVT for fords it fits our bracket! It's so sick and out of the window view. Also you should take your intake mani and drivel out all he die cast marks. An 80mm throttlebody port matched and you'll be ready for that s/c dude. All these mods you definitely need to get a dyno tune asap. Running lean on deceleration or anywhere on the power band can cause damage you don't want.
Nice video, good install and runs👌! Also, the EGR delete is 2 different part #'s. I did the same thing, so had to order the rest separately for more shipping charges👎.
Thanks I realized that after lol. But the top egr kit I got will work for now l. It would be nice to get the egr pipe delete it would look cleaner with those
Yeah 😂 that's right ☺️ if you open upgrade your TL exhaust it'll give more breathingspace also sounds 👍 hearing when VTEC kicking in how I know because my straight pipe setup on my 4g TL fwd tech sounds crazy 😹 good content 😂 bro I am going get spacers and j pipe rv6 upgrade in 2023
I mean, but how negligible is it really? I’ve gone as far as topping out the speedo in my tuned 9G AV6 6MT, and unless you’re doing higher speed roll racing and actually going past 120-140+ and wanting to pull that hard until eternity, then I guess it would matter. Other than that….
Niice video bro 👌🏿 I need tht for my RL the look on tht guys face 🤣🤣🤣 pause vid @ 12:57... I've got a Pedal commander in my car pretty cool check it out if u haven't heard of it.
Do you happen to know what the hose is on the top right of the manifold/plenum? To the left of the throttle body? I did a j37 intake manifold swap but need some hardware to get that bracket that holds the hose in properly
@@GarrettMedia thanm my dude definitely gonna check it out cuz I need my tlx pushed as far as I can go naturally aspirated before I spend on a turbo setup in another 2 years probably gotta use my warranty 1st loll
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Thank you bro, this is the type of footage we need. I'm a noob so I'm very appreciative of this. I own a 2012 3.7 myself.
😊😌
Just got mine put in yesterday! Worth it.
If you are looking to get one here are my results. All I have is intake and muffler deletes.
Instead of the power gradually kicking in and being strongest from 5000-7000 rpm, the torque is shifted to what feels like it’s strongest from 4000-5500. Power does sharply drop off at 6500 now. The car accelerates faster and if you are ok with less power around redline then do it.
I knew you’ll love it! Only thing I didn’t like about the kit was the thermal gaskets. Mines were terribly cut, but I think they got way better with quality nowadays. Congratulations on being FBO btw 🙌. I finally received and installed my RV6 V2 long tube race J pipe yesterday.
Very interested in this mod! Last clip is so funny hahahaha !! Keep it up ballerrr
can’t wait till you get this dyno tuned man, love the 4GTL ❤️
Coming soon
Nice man, but remember J series shine at top end speed. In my opinion I would focus more on mod that increase high end torque even though low end torque is nice for dig race.
always following you bro
you can loop out the coolant lines from the TB.. all they do is SUPER-heat the TB and keep it hot which isn't good for power. unless you live in subzero weather, you're fine. i been running without the TB coolant lines up here in the northeast for years and never had an issue!
Did this TB coolant line delete a year ago 👍
Yo I got you on the mount homie I use a vent mount for SVT for fords it fits our bracket! It's so sick and out of the window view. Also you should take your intake mani and drivel out all he die cast marks. An 80mm throttlebody port matched and you'll be ready for that s/c dude. All these mods you definitely need to get a dyno tune asap. Running lean on deceleration or anywhere on the power band can cause damage you don't want.
Nice video, good install and runs👌! Also, the EGR delete is 2 different part #'s. I did the same thing, so had to order the rest separately for more shipping charges👎.
Thanks I realized that after lol. But the top egr kit I got will work for now l. It would be nice to get the egr pipe delete it would look cleaner with those
Damn that 3.7 pulls love j series
Interesting! Now i learned something
Digg the videos and your car. How does the engine covers fit after this mod? Any clearance issues with the hood after adding the spacer?
Thanks 🙏 I actually don’t use the engine cover I feel like it retains heat.
MAKING ALL KINDZ OF GAINZZ!!!
Yeah 😂 that's right ☺️ if you open upgrade your TL exhaust it'll give more breathingspace also sounds 👍 hearing when VTEC kicking in how I know because my straight pipe setup on my 4g TL fwd tech sounds crazy 😹 good content 😂 bro I am going get spacers and j pipe rv6 upgrade in 2023
Spacers is definitely worth it’ll move your power band to low to mid power. Vtec is satisfying to hear when you have your intake and exhaust done 🔥
i had a mdx plenum spacer on my tl haha, took it off bc of the loss of power up top (i knew that bc the top speed was lower)
I mean, but how negligible is it really? I’ve gone as far as topping out the speedo in my tuned 9G AV6 6MT, and unless you’re doing higher speed roll racing and actually going past 120-140+ and wanting to pull that hard until eternity, then I guess it would matter. Other than that….
i noticed your check engine light is on, with all the mods you have, is that causing your check engine light to stay on?
It’s in due to PCD but it eventually goes away
nice mods. i just bought '13 type SH AWD W/TECH . how does your car rev past 7k? is it the tune? im planning to mod mine. doing PCD, J-PIPE, CAI, TUNE
Those mods sounds like a good start. I’m able to rev that high because I change it with my ktuner
Need help with my 2017 tlx sh swd .. any mods you guys suggest 👀
That engine is different, but pretty much you can do the same FBO and go for a 3.7L intake manifold and throttle body swap.
Nice great video!! Did this a code after you installed it saw the check engine light?
No cel came on at all for the mod
Yo, what part of VA are you in?
Niice video bro 👌🏿 I need tht for my RL the look on tht guys face 🤣🤣🤣 pause vid @ 12:57... I've got a Pedal commander in my car pretty cool check it out if u haven't heard of it.
Do you happen to know what the hose is on the top right of the manifold/plenum? To the left of the throttle body? I did a j37 intake manifold swap but need some hardware to get that bracket that holds the hose in properly
I have a 2012 Acura TL sh awd, and I can’t find the crank shaft sensor I have to replace it can you help me out bro please
where yo headers my boy?
What was that blue car at the beginning
There is one..!there are two.or more..
did you miss a shift in an auto
I literally have the same car man! A-spec kit, same colour but you have better mods.
Did you do your own tune with the tuner or did someone do it for you
No tune yet I’m using the basemap tune #4 that came with the ktuner
@@GarrettMedia gotcha thanks. I’m using the base one as well and was just wondering. Love the videos.
Yo can I use these mods on my 2018 tlx aspec 3.5?
I believe you can checkout powerrevracing.com for fitment
@@GarrettMedia thanm my dude definitely gonna check it out cuz I need my tlx pushed as far as I can go naturally aspirated before I spend on a turbo setup in another 2 years probably gotta use my warranty 1st loll
Hi I wanna do it to my tl where I can get that
Check out www.powerrevracing.com/
That’s where I got mines from 👍
Can this fit the J35a9?
Check out powerrevracing.com for engine fitment.
Can i do this mod without having ported runners ?
Of course you can 👍
@@GarrettMedia awesome.
Now one day once you finish tuning your car and adding mods you should make a whole video of the things you have on it
What year
2010 sh-awd