Piezo and Solenoid Common Rail Diesel Injectors testing to destruction
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2019
- Megger tests of Diesel Injectors, Solenoid burn out, Piezo activity on a first look Sensor
Piezoelectric explanation video • Piezoelectric pressure...
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl - ยานยนต์และพาหนะ
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl
Really interesting and informative video. Thank you.
You're welcome
Really good video how to testing😃😃👍💪. What pulse waves modulator you are using on video because I can’t find on your shop listing? Thanks
Hi Dave great video as usual. Are the piezoelectric injectors polarity sensitive?
Does it matter which way you connect the megger tester?
Yes u need to get the polarity correct on the piezo type. I shud have mentioned that. Great question
Great video and lots of good info. Is there anyway to know 100% by the look of the injector if they are piezo. Also where did you find that Bosch printed info. :)
Hey Ron, yes just do a resistance check across he pins.
Bosch test here
www.bgdiesel.dk/otherfiles/dk/bosch/piezo-electricmetering.pdf
I don't understand. Why did 12V kill the injector?
Hello Dave...Nice wee demo. I know next to nuthin about diesel so that was interesting for me. The terminology wont be right in my question. But what is typical "lift" of the injector pintle say for a 2 litre diesel, understood it would likely vary with RPM & Load. But are we talkin a few thou ?...Does solenoid/piezo just actuate a needle valve to port pilot pressure to lift the pintle proper? Sorry too many questions...Cheers Pal
Yeah ian just a few thou to lift the pintle
a wee bit more info, ian. The piezo needle may not actuate the injector pintle directly. The two are hydraulically connected which exaggerates the movement of the injector opening. there could be maybe 400 piezos in the stack and need a few hundred volts to excite. altho, as you saw from the vid, the designs are varied nowadays. also ive read the voltage the piezo creates is read back to the ecu to learn injector opening lift in some cases. thought i give u a bit more, cheers dave
Very helpful video sir I'm from India
Thanks and welcome
Great video, where did you get the instructions for the tests as would be handy to have in the workshop?
It was on the internet but the link no longer works
nice video Dave. does a piezo injector have to have the current reversed to turn it off? We are told never to unplug them whilst running as it could flood the cylinder if switched off whilst they are injecting (open)
hey steve, yes there is truth to this, the stack stays expanded after energising. I found that shorting it out will collapse it as it acts as (or is) a capacitor. This is a good question as i believe the piezo's capacitance could be used as a means of testing. I intend to follow this up in the future when i get some known goods.
@@davesterl The way would be to current clamp & scope a running engine, see if the current ramp reverses
Hi Dave, the Bosch tech link doesn’t go anywhere, do you have another link please.
Great video 😊
It hasnt worked for a while now. I do not have another but it may be on the net somewhere
Hello Dave, this VDO solenoid is burst. On Unit-t device, at 100V, the reading should be 19Mohm and around 106volts. Yours show 0 reading which means the solenoid is gone.
yes, thats why it does not work
Hi Dave. Sorry to post on here but not sure where to ask.i have a megger mit that only has 250v and 500v setting.is it ok to use the 250v setting to test piezo injectors while still on car. Does polarity make any difference when testing across both pins of the injector while still on car ? If so which way should the leads red and black go to the pins ?Cheers. P.s have asked about but not found the answer.Thanks for the uploads very informative.
100volts is the normal test voltage. Any higher and you risk damaging the injector, also the polarity is important. See some of the other comments for the bosch instructions
@@davesterl Thanks Dave. Appreciated.
On VDO, there is another reading which is microfarad.
A megger tester produces ac voltage, the operation voltage of piezo activator is dc, polarity is important. Try a positive square wave and you will find the it will work(perhaps).
This insulation resistance tester outputs DC as does every other one ive came across and I've got one that goes up to 30kv
@@davesterl I would like to send you a PDF that shows the reason for my suggestion. You are correct, modern insulation testers do produce continuous DC, but the problem is in the current they provide i.e. 2mA as the Actuator requires ~ 8A, that is max. , average through through 0.4 mS is about 4A and that is why they have small cables. Would like to hear your view on the matter. R
I'm confused about these bosch solenoid fuel injectors for actuating these injectors. I know hooking up a car battery to one will fry it. Also car voltage is only 12 volts so there's no 100, 200.volts
The 100volts is a back emf generated by the coil in the solenoid
@@davesterl ok. So what is the voltage and amperaged put to the solenoid to get the injector to trigger?
@@frontlinemedia4270 duty cycle controlled
hello sir I got great information from this video thanks a lot sir and one more thing I want training sir plzz reply meee
Cheers glad it helped. The training is up to you to go and get
dave sterl I want apprentice in u r workshop sir
@@aqueeluddin443 no problem if you live locally
dave sterl actually sir that's the problem I'm from India sir I request u to plz issue a visa for job work
18:45 proves my pt with too high voltage
That contoller is not increasing the voltage
@@davesterl I didn't say it was. Putting car voltage to a bosch injector will fry it. I want to know what voltage and amperage is used to get it to function, 'click' , and not cause damage
@@frontlinemedia4270 you said 'too high voltage'
@@davesterl voltage or amperage. Not sure what it is at this pt, but I know a car battery, if let hooked up, will fry the injector