Brother this cause also a cold engine vibration? I have a w203 c220 cdi. When the engine is cold , there is a strong vibration but after 30 minutes when it’s warm , the vibration is not any more . Can you please help me?
I'd like to thank you for your help, however i was struggling to find out what is the proper order for the injectors as you probably know that they are in a different angles, like which one for cylinder 1 .2. 3. 4 when you put them back
thank you for the useful information. i have a c180 W204 with weird problems and i think its a injector problem. no check engine light with misfire, smells like its flooding and poor idle + randomly dies., all the problems are intermittent as well. this info on the video will help me take them out and test them.
Hi I have same car 2002 c230 kompressor I had a code p0410 secondary air pump. The car is very sluggish not like it used to and also had bad gas mileage. Any idea what the cause is?
Myw203 Benz C180 m111 was smoking excessive white smoke, then I changed the gasket and have the cylinder head machined. After doing everything the car still smoking white smoke as before, what could be the other causes
Hey so i just replaced my fuel pressure regulator, cleaned my maf sensor and throttle body, just got a new fuel filter ad pump too and even replaced the spark plugs and it still won’t start. The boots are kinda of hard and crusty though would that be the main problem? I just don’t want to replace my fuel injectors too if i wont have to.
Dear doit_vehicles Your collection of videos have delighted me and I have learned so much. Your old Mercedes is just like mine. Thanks for your effort. Some of the jobs I feel afraid to do like changing the supercharger fluid. By the way, I heard that vacuum diagnostic is very important to detect a number of faults. Do you have a video on how to test the vacuum lines in this vehicle? Regards.
I am happy to hear that I can help others by making these videos ) I know the thought of braking something can be scary .. If you search for Mercedes w203 Evaporative emission Control sistem , that is a video where I used the hand vacuum pump . Cheers !
Great video! I recently had my fuel injectors changed (all 4) for my C180 w203 2007. My car has been misfiring and there is some serious vibration. What do you suggest?
Hi ! Beggin by collecting more live data from the oxygen sensors , Long / Short term fuel trims , throttle body , check if the coil packs release the spark , inspect for large vaccum leaks and any trouble codes ; also fuel pressure can be a issue which will not trigger a specific code ..
Great video, just curious about the resistance spec though...I couldn't find any specs on line on these Siemens injectors but 1,000 ohm sounds high...I tested all four of mine off the vehicle at 14.4 ohms each, are you sure about the 1,000 ohm spec?
Hey. My w203 gives black smoke in huge amount when accelerating. The car says vist workshop EPC control!. I dont know if the problem is with the fuel pump? Fuel injectors? Or EGR valve. Please guide, have wasted alot on different mechanics
I understand black smoke its deffinetely because of too much fuel into the mixture with air . The ratio should be 14.7 air and 1 part fuel . Now that extra fuel that your car is burning when accelerating can come in different ways : The most common way is leaky fuel injectors , than it might be also any air messuring sensor which is not reading the correct air coming into the engine . To detect that you will nees some tests with live data from the car . Deffinetely a fuel pump will not cause black smoke from the exaust .. On this car from the video there is no typical egr valve , so if your car has one , is worth checking it , since it might mess up with the oxygen sensors readings in some situations ...
Great video , thanks , I have learnt a lot from you. I have a 2002 c200k with this same engine now for 15 years, car runs well but recently it seem to drop idle speed as though it is going to stall, happens after engine has been running for 15 min. Runs well with no misfires only occurs at stop intersections when idling in drive. I changed cam, and crank sensors also fuel pump and fuel filter late last year, can a faulty injector cause this type of issue.
It does not seem like a faulty injectors issue , as long as the car runs ok while accelerates . If you have a scan tool with some live data info , that will be much easier to locate the faulty component . So , you might beggin by colecting more data like : , exhaust smoke / colour , test / clean the MAF sensor , vacuum leaks , LTFT , STFT and so on ...
Salut te rog ajutama am controlat injectoarele sunt bune dar toate mufele pentru curent au protectia rupta si s-au atins firele intre ele zimi te rog daca refac instalati ce siguranta trebuie sa verific
Hi please help I checked the injectors are good but all the power plugs have broken protection and the wires have been touched between them zimi please if I install again what safety should I check florynman@gmail.com
Hi. Any idea way running on 3 injector when cold (only).? Start engine let him running for 30 seconds, stop engine, start again working well (4 injectors) all day till next morning. So injector 1 not working at all. New spark plugs, and coil. Engine code is M111 957 Check with multimeter have same measurement 14,9 ohms all 4 injectors P0301 is te code misfayer. Thanks
Hi ! So at the moment you have a missfire on cylinder 1 ? What are the results from the compression test ? Are the connectors ok ? Check for a spark from the coil pack (run the engine with the coil and the spark plug out and see if there is spark ) If there is no spark connect a test light to the ground , remove the spark plug and keep the test light close to the coil pack and you should see the spark jump as the engine runs. Meanwhile disconnect the injector on the cilinder you do the test , so the cylinder will be filled with gasoline . This is just one possibility .
Thanks man ! As far as I know the engine is very reliable if it got basic maintanance in the past . This engine had time to "evolve" and develop over time from the older inline 6 cylinder one . The issue might be the supercharger and the oil separator as they tend to leak oil or get a failure on the supercharger bearings ( the supercharger system was a quite new disign for this generation )
Awesome video, my friend. I searched for fuel rail leak and found this video as one of the first results. Keep going
Brother this cause also a cold engine vibration? I have a w203 c220 cdi. When the engine is cold , there is a strong vibration but after 30 minutes when it’s warm , the vibration is not any more .
Can you please help me?
I'd like to thank you for your help, however i was struggling to find out what is the proper order for the injectors as you probably know that they are in a different angles, like which one for cylinder 1 .2. 3. 4 when you put them back
thank you for the useful information. i have a c180 W204 with weird problems and i think its a injector problem. no check engine light with misfire, smells like its flooding and poor idle + randomly dies., all the problems are intermittent as well. this info on the video will help me take them out and test them.
Hi I have same car 2002 c230 kompressor I had a code p0410 secondary air pump. The car is very sluggish not like it used to and also had bad gas mileage. Any idea what the cause is?
great video clear and informative..
Myw203 Benz C180 m111 was smoking excessive white smoke, then I changed the gasket and have the cylinder head machined. After doing everything the car still smoking white smoke as before, what could be the other causes
Very Exhaustive. Thanks
Easy understandable and useful video. Thx dude. Keep on bro.
Thanks !
Hi help me out please no Power in my c240 spark plugs and fuel injector but the car crank
Hey so i just replaced my fuel pressure regulator, cleaned my maf sensor and throttle body, just got a new fuel filter ad pump too and even replaced the spark plugs and it still won’t start. The boots are kinda of hard and crusty though would that be the main problem? I just don’t want to replace my fuel injectors too if i wont have to.
does it crank ? any codes ?
Dear doit_vehicles
Your collection of videos have delighted me and I have learned so much. Your old Mercedes is just like mine. Thanks for your effort. Some of the jobs I feel afraid to do like changing the supercharger fluid. By the way, I heard that vacuum diagnostic is very important to detect a number of faults. Do you have a video on how to test the vacuum lines in this vehicle? Regards.
I am happy to hear that I can help others by making these videos ) I know the thought of braking something can be scary ..
If you search for Mercedes w203 Evaporative emission Control sistem , that is a video where I used the hand vacuum pump . Cheers !
Great video!
I recently had my fuel injectors changed (all 4) for my C180 w203 2007. My car has been misfiring and there is some serious vibration. What do you suggest?
Hi ! Beggin by collecting more live data from the oxygen sensors , Long / Short term fuel trims , throttle body , check if the coil packs release the spark , inspect for large vaccum leaks and any trouble codes ; also fuel pressure can be a issue which will not trigger a specific code ..
@@doit_vehicles I see. Thank you very much!
Great video, just curious about the resistance spec though...I couldn't find any specs on line on these Siemens injectors but 1,000 ohm sounds high...I tested all four of mine off the vehicle at 14.4 ohms each, are you sure about the 1,000 ohm spec?
Hey. My w203 gives black smoke in huge amount when accelerating. The car says vist workshop EPC control!. I dont know if the problem is with the fuel pump? Fuel injectors? Or EGR valve.
Please guide, have wasted alot on different mechanics
I understand black smoke its deffinetely because of too much fuel into the mixture with air . The ratio should be 14.7 air and 1 part fuel . Now that extra fuel that your car is burning when accelerating can come in different ways : The most common way is leaky fuel injectors , than it might be also any air messuring sensor which is not reading the correct air coming into the engine . To detect that you will nees some tests with live data from the car . Deffinetely a fuel pump will not cause black smoke from the exaust .. On this car from the video there is no typical egr valve , so if your car has one , is worth checking it , since it might mess up with the oxygen sensors readings in some situations ...
Do u have diy crakshaft sensor vedio on m111?THXS
not for m111 ..
Hello i have W124 E220 I have a problem with acceleration. I change the plugs, debimetre and throle body. Do you have any idea I am tired from here
What are the symptoms ?
Great video , thanks , I have learnt a lot from you. I have a 2002 c200k with this same engine now for 15 years, car runs well but recently it seem to drop idle speed as though it is going to stall, happens after engine has been running for 15 min. Runs well with no misfires only occurs at stop intersections when idling in drive. I changed cam, and crank sensors also fuel pump and fuel filter late last year, can a faulty injector cause this type of issue.
It does not seem like a faulty injectors issue , as long as the car runs ok while accelerates . If you have a scan tool with some live data info , that will be much easier to locate the faulty component .
So , you might beggin by colecting more data like : , exhaust smoke / colour , test / clean the MAF sensor , vacuum leaks , LTFT , STFT and so on ...
Thanks, I will try to get a scan tool
👌
Salut te rog ajutama am controlat injectoarele sunt bune dar toate mufele pentru curent au protectia rupta si s-au atins firele intre ele zimi te rog daca refac instalati ce siguranta trebuie sa verific
Hi please help I checked the injectors are good but all the power plugs have broken protection and the wires have been touched between them zimi please if I install again what safety should I check florynman@gmail.com
You mean the coil packs have exposed wires ? You can check the fuses and relays vid. It has to be one of the fuses marked as " engine electronics "
Really good vid. Thank you.
Hi.
Any idea way running on 3 injector when cold (only).?
Start engine let him running for 30 seconds, stop engine, start again working well (4 injectors) all day till next morning. So injector 1 not working at all.
New spark plugs, and coil.
Engine code is M111 957
Check with multimeter have same measurement 14,9 ohms all 4 injectors
P0301 is te code misfayer.
Thanks
Hi ! So at the moment you have a missfire on cylinder 1 ? What are the results from the compression test ? Are the connectors ok ? Check for a spark from the coil pack (run the engine with the coil and the spark plug out and see if there is spark ) If there is no spark connect a test light to the ground , remove the spark plug and keep the test light close to the coil pack and you should see the spark jump as the engine runs. Meanwhile disconnect the injector on the cilinder you do the test , so the cylinder will be filled with gasoline . This is just one possibility .
@@doit_vehicles.
I did everything, and luck good.
So have to wait until geet worse (don't now what else to do).
Thank you
Where is the crakshaft sensor ?thxs
passenger side close to the transmission
Great work.
Keep it up bro.
How reliable are this system, what are the common issues with the engine?
Thanks man ! As far as I know the engine is very reliable if it got basic maintanance in the past . This engine had time to "evolve" and develop over time from the older inline 6 cylinder one . The issue might be the supercharger and the oil separator as they tend to leak oil or get a failure on the supercharger bearings ( the supercharger system was a quite new disign for this generation )
@@doit_vehicles thank you !!!
What is the size of the Schrader valve
1/8NPT
Are the w204 injectors same like c204?
I do not have much experience with newer MB like w204
Tenks
Z