Hi there. If my blower keeps cutting in then out (but I can still change the fan speed when it's decided to work) could it still be a resistor issue? Thanks!
@@admiralshwartz3956 i pull on wires under glove box and the motor is stronger/more heat blows stronger, then it goes lower/weaker as soon as i let the wires go.
Yeah I replaced my blower motor it turned on for a bit then completely off going to replace the resistor Monday when it comes in, hope that solves my issues.
My '11 camry blower motor stays on high even with the vehicle off and key out. Please help! Fixed Update: the blower motor has a resister in it. You can replace the $50 blower motor or replace the $25 resister. I recommend replacing the resister because the chinesium motor isn't as good as the original. They're both under the glove compartment (passenger side)
I changed the blower motor in my car but now when I turn on the AC only a little air comes out. I changed both filters and when changing the fan speed I hear the blower increase in power but still little air out vents. What you guys think?
Can this also cause the ac compressor not to engage I have this issue but the air is also not getting cold either it works on highest speed. But air doesn’t cool down. Heat works though
@@ding9633 Yes I actually did Removed the blower motor to test it with a 9 volt battery after finding out if or not your blower motor works I went back and testing the relay in the fuse box and it ended up being that. Hope this works for you.
@estebansaint i have similar problem. My AC doesn't blow cold air so I replaced the AC compressor now I notice it only blows on max setting, but I THINK it did that when the A.C. actually used to blow cold air last summer but I could be wrong. Did yours start to blow cold and on all settings once you replaced the relay?
If I replace my motor resistance would the Air flow be fixed? Like I fans are blowing but it is just not enough and doesnt really get hot but it does come warm Air out
Well could be a blown fuse I would check that first if that’s not the problem I would replace the resistor or at least test the old one that you have if that checks out then I would look into buying a blower motor especially if you swich the speed and nothing happens because usually the resistor or the motor will go out before the switch/ relay dose
My '11 camry blower motor stays on high even with the vehicle off and key out. Please help! Keeps running down the battery. Fixed Update: The blower motor has a resister in it. You can replace the $50 blower motor or replace the $25 resister. I recommend replacing the resister because the chinesium motor isn't as good as the original. They're both under the glove compartment (passenger side)
It's possible that the relay is stuck in the "on" position, causing the blower motor to run continuously. Locate the relay in the fuse box and try swapping it with a similar relay to see if that resolves the issue.
Have a 2014 Dodge Durango V6. Air totally stopped blowing. Front blower motor fuse has blown several times. I've replaced them with other 40A ones from the fuse box. Then replacing those with non oem 40A ones. Every time the AC starts working fine again. It lasts a few weeks to about a month. Last time I used one of the aftermarket 40A for the blower. Today it blew & the fuse actually melted in its spot. Gonna try to coax it out of there. Someone had mentioned these fuses are directional. The oem ones have theses grooves on one side where the aftermarket ones did not. Not sure if this was a factor. But gonna buy the oem style after I get it out. Don't believe its a short because the problem is not intermittent. Gonna try replacing the blower motor, resistor & plug if it looks burnt. In your opinion or if someone else that's knows these symptoms please chime in, would you say that's a sounds like a sound plan of attack to in all likelihood resolve my issue or is this over kill? Thanks!
If it melted then that means it’s making a bad connection at the fuse. Same thing happened to me. Dealership said I need a new fuse box under hood. $600 plus labor. Nope I took it out and bent the prongs back together. Fixed it
I have a 2005 Scion tc that AC works fine and randomly after a while the blower won’t kick on unless I tap on the bottom pretty hard and it gets it going fine no problem. All speeds works. Could it still be a bad blower motor resistor?
Hey guys. I have a problem. In my 1996 Chevy Tahoe the ac and the air stop coming out . This happened last week . I was driving and using the ac and at first it smelled like something was burnt and then the air stop coming out. I was using the mood wear all the air gets push out to you but when the air shout off I could feel it barely coming out from the vent under the dash . Any ideas on how I can go about fixing it ? Thank you’ll
It could be a couple issues the first one I would try and see if there’s a short somewhere that cased the meltdown (if any of the wires are melted that is) if not I would try to replace the blower motor especially if you used it a lot recently and or if it’s never been replaced after checking the fuses ofc
I got an Audi A4 (B5) that when on heater, the fan speed slowly increases by itself and then pops a fuse. I tried it on a/c and it pops the fuse in less than a minute. I'm guessing its the blower motor resister/relay? Edit: I should also mention the fact that my controls are digital and not a dial. I see the LED screen increase fan speed. The circuit board for the display looks fine and clean. No burn marks. Its a year 2000 vehicle, so my guess is the relay is shorting and it back feeds to the panel thinking the speed changed due to voltage increase?
my heat works and the blower works, my a/c sometimes works and other times it does not. when its not working i cannot control my vents it defaults to defrost vent and that is it.
I have the same issue on a 2013 Honda CRV. Just manifested today. When the car is hot, that’s when it happens. Everything works normally when the car is cold.
May join just be the switch going to it try electric spray cleaner on the switch I cleaned mine and solved my trouble a man needs to clean the electric switches on a car or truck anyway you be surprised how it will help I keep a can of it
I have a question my car just star making a weird noise that was my blower motor jus yesterday and today just stop working no air nothing and im confuse if i only need to change the blower motor or both im not sure
I'm getting a burning rubber smell as I'm driving and i hear a sort of humming or buzzing noise, just replaced my fan blower motor about 2 months ago. Could that be because of the resistor?
It could be but to me sounds like a short circuit somewhere causing a meltdown somewhere in the system I would check your wires around your ventilation system first
Hey buddy I have a 2004 Mercedez Benz sl500. The climate control suddenly stopped working, I mean there’s no light nothing coming on from the front panel Do you think it’s the blower resistor or something else ?
@@hsittefchannel8911 So, there’s the R23 fuse which is related to the AC and there are couple other fuses under the hood, which they all work fine. A mechanic connected a scanner to the car to see if the blower and the climate control receive their power. He left the car for a minute to answer a phone call that suddenly my AC started to work for about 30 seconds and then all the lights on the climate control went off. Don’t you think it’s the climate control ? Because the blower worked for 30 seconds. What do you think ?
@@kishorilalkishoreda5719 it sounds like a short somewhere or a lose connection because my radio would do the same thing and it ended up being a faulty ground connection and a blown fuse
what if the blower motor is blowing at inconsistent speeds? mine set on any setting will blow but will fluctuate blowing harder and softer...could this be a resistor issue?
Mine started doing the same thing last year. I had to add refrigerant to my system, and the problem went away. The problem just popped back up yesterday. Let us know if you find a fix.
It could be a bad resistor but it could also be a short somewhere or somewhere I sent making good contact especially if it improves if you hit a bump/jolt the car in some way I would check the connections first then go to test the resistor
@@uncleandy7983it could be a leak somewhere in the system I would check that especially if adding refrigerant fixed the issue for more then a couple days
Man I'm stumped and Idk what to do anymore. 😔 I got a 06 crown victoria and the AC would work but barely blow. The high speed level felt like the lowest but each speed would be about a 1/10th faster than the other. Then I turned the knob to heat and it changed to heat..ok fine.. Well no it's not because when I went to put it back on cold it's stuck on heat. I know blend door actuators are a common fail but so is the resistor. I'm lost
It could be that or a blown fuse due to the short that caused the meltdown I would check for shorts first then the fuses/relays responsible then test the resistor
You can clean the switch with electric spray cleaner too before you think it's the resister it was why my Ford truck just run on hi cleaned the switch and wa ahh
Surfers make the best TH-cam mechanic videos
lmao
Totally
@@RobertMichaelPhotography hahaha I see what you did there
Please do a video on a bad electronic throttle body and symptoms and possible testing with a multimeter.
Thank you. My blower motor fan runs on high no matter what. Going to change the B.M.
Keep your videos coming, Thanks
I appreciate you!
Forgive me if this is a terrible question to ask, how does the blower motor become so dirty? How does debris get into the blower motor?
Lack of, or not replacing the cabin air filter.
Hi there. If my blower keeps cutting in then out (but I can still change the fan speed when it's decided to work) could it still be a resistor issue? Thanks!
Same issue
Find out?
@@vipers2002rt more than likely it’s the whole blower motor
@@admiralshwartz3956 My b.m. is only 2 years old, replaced it in 21.
@@admiralshwartz3956 i pull on wires under glove box and the motor is stronger/more heat blows stronger, then it goes lower/weaker as soon as i let the wires go.
Yeah I replaced my blower motor it turned on for a bit then completely off going to replace the resistor Monday when it comes in, hope that solves my issues.
Did it work?
2014 Hyundai accent, 4-speed blower, position three acts like it's on low, the other positions were correct. Would this be a switch or resistor??
Tell me you didn't watch the video, without telling me you didn't watch the video.
Has anyone came across this problem the blower motor stays on high even when set to off position . is it the resistor ?
I'm having the same problem. Did you figure anything out?
yes it is
My '11 camry blower motor stays on high even with the vehicle off and key out. Please help!
Fixed Update: the blower motor has a resister in it. You can replace the $50 blower motor or replace the $25 resister. I recommend replacing the resister because the chinesium motor isn't as good as the original.
They're both under the glove compartment (passenger side)
The ac panel,most of the time
@@trentgreenofficial8275 just replaced my resistor and it’s still stuck on the lowest setting
I changed the blower motor in my car but now when I turn on the AC only a little air comes out. I changed both filters and when changing the fan speed I hear the blower increase in power but still little air out vents. What you guys think?
Can this also cause the ac compressor not to engage I have this issue but the air is also not getting cold either it works on highest speed. But air doesn’t cool down.
Heat works though
Did you find an answer?
@@ding9633
Yes I actually did
Removed the blower motor to test it with a 9 volt battery after finding out if or not your blower motor works
I went back and testing the relay in the fuse box and it ended up being that.
Hope this works for you.
@estebansaint i have similar problem. My AC doesn't blow cold air so I replaced the AC compressor now I notice it only blows on max setting, but I THINK it did that when the A.C. actually used to blow cold air last summer but I could be wrong. Did yours start to blow cold and on all settings once you replaced the relay?
My a/c is always on in my car. Does not matter how many times I press the a/c button or what mode it's in. Can this be the cause?
If I replace my motor resistance would the Air flow be fixed? Like I fans are blowing but it is just not enough and doesnt really get hot but it does come warm Air out
Having the same issue with my 07 Silverado, looking for fix.
Well could be a blown fuse I would check that first if that’s not the problem I would replace the resistor or at least test the old one that you have if that checks out then I would look into buying a blower motor especially if you swich the speed and nothing happens because usually the resistor or the motor will go out before the switch/ relay dose
When the fuse for it is in, everything works fine but it won’t turn off even when the car is off. Is this the same kind of issue or something else?
My '11 camry blower motor stays on high even with the vehicle off and key out. Please help! Keeps running down the battery.
Fixed Update: The blower motor has a resister in it. You can replace the $50 blower motor or replace the $25 resister. I recommend replacing the resister because the chinesium motor isn't as good as the original.
They're both under the glove compartment (passenger side)
It's possible that the relay is stuck in the "on" position, causing the blower motor to run continuously. Locate the relay in the fuse box and try swapping it with a similar relay to see if that resolves the issue.
Have a 2014 Dodge Durango V6. Air totally stopped blowing. Front blower motor fuse has blown several times. I've replaced them with other 40A ones from the fuse box. Then replacing those with non oem 40A ones. Every time the AC starts working fine again. It lasts a few weeks to about a month. Last time I used one of the aftermarket 40A for the blower. Today it blew & the fuse actually melted in its spot. Gonna try to coax it out of there. Someone had mentioned these fuses are directional. The oem ones have theses grooves on one side where the aftermarket ones did not. Not sure if this was a factor. But gonna buy the oem style after I get it out. Don't believe its a short because the problem is not intermittent. Gonna try replacing the blower motor, resistor & plug if it looks burnt. In your opinion or if someone else that's knows these symptoms please chime in, would you say that's a sounds like a sound plan of attack to in all likelihood resolve my issue or is this over kill? Thanks!
If it melted then that means it’s making a bad connection at the fuse. Same thing happened to me. Dealership said I need a new fuse box under hood. $600 plus labor. Nope I took it out and bent the prongs back together. Fixed it
I have a 2005 Scion tc that AC works fine and randomly after a while the blower won’t kick on unless I tap on the bottom pretty hard and it gets it going fine no problem. All speeds works. Could it still be a bad blower motor resistor?
Hey guys. I have a problem. In my 1996 Chevy Tahoe the ac and the air stop coming out .
This happened last week . I was driving and using the ac and at first it smelled like something was burnt and then the air stop coming out. I was using the mood wear all the air gets push out to you but when the air shout off I could feel it barely coming out from the vent under the dash . Any ideas on how I can go about fixing it ? Thank you’ll
I had this exact issue with an 08 tahoe
It could be a couple issues the first one I would try and see if there’s a short somewhere that cased the meltdown (if any of the wires are melted that is) if not I would try to replace the blower motor especially if you used it a lot recently and or if it’s never been replaced after checking the fuses ofc
Well done
Great video
Thank you!
I got an Audi A4 (B5) that when on heater, the fan speed slowly increases by itself and then pops a fuse. I tried it on a/c and it pops the fuse in less than a minute. I'm guessing its the blower motor resister/relay?
Edit: I should also mention the fact that my controls are digital and not a dial. I see the LED screen increase fan speed. The circuit board for the display looks fine and clean. No burn marks. Its a year 2000 vehicle, so my guess is the relay is shorting and it back feeds to the panel thinking the speed changed due to voltage increase?
Theres a short
i have an 06 accord and the blower does not change from defrost to vent
my heat works and the blower works, my a/c sometimes works and other times it does not. when its not working i cannot control my vents it defaults to defrost vent and that is it.
I have the same issue on a 2013 Honda CRV. Just manifested today. When the car is hot, that’s when it happens. Everything works normally when the car is cold.
@@HomeOrchard i have yet to find the problem
I have a 2017 Ram 2500 and on high fan speed it feels like it’s barely on. Would that resistor cause that to happen?
It is possible yes, it could also be your blower motor.
May join just be the switch going to it try electric spray cleaner on the switch I cleaned mine and solved my trouble a man needs to clean the electric switches on a car or truck anyway you be surprised how it will help I keep a can of it
I have a question my car just star making a weird noise that was my blower motor jus yesterday and today just stop working no air nothing and im confuse if i only need to change the blower motor or both im not sure
Same problem on my Lexus rx300. Any advise? Other than start replacing from cheapest item & work my way up till fixed?😂
@@nickdesaint4601 blower motor was my issue
I'm getting a burning rubber smell as I'm driving and i hear a sort of humming or buzzing noise, just replaced my fan blower motor about 2 months ago. Could that be because of the resistor?
It could be but to me sounds like a short circuit somewhere causing a meltdown somewhere in the system I would check your wires around your ventilation system first
nice
Thank you!
Hey buddy I have a 2004 Mercedez Benz sl500. The climate control suddenly stopped working, I mean there’s no light nothing coming on from the front panel
Do you think it’s the blower resistor or something else ?
Sounds like a blown fuse somewhere I’d check that first
@@hsittefchannel8911 I have checked all fuses but they are all working
Thanks
@@kishorilalkishoreda5719 hmm did you smell any burning or did you ever figure out what the issue was if not what all have you tried so far
@@hsittefchannel8911 So, there’s the R23 fuse which is related to the AC and there are couple other fuses under the hood, which they all work fine. A mechanic connected a scanner to the car to see if the blower and the climate control receive their power. He left the car for a minute to answer a phone call that suddenly my AC started to work for about 30 seconds and then all the lights on the climate control went off. Don’t you think it’s the climate control ?
Because the blower worked for 30 seconds. What do you think ?
@@kishorilalkishoreda5719 it sounds like a short somewhere or a lose connection because my radio would do the same thing and it ended up being a faulty ground connection and a blown fuse
what if the blower motor is blowing at inconsistent speeds? mine set on any setting will blow but will fluctuate blowing harder and softer...could this be a resistor issue?
The same issue here. Did you figure it out?
Mine started doing the same thing last year. I had to add refrigerant to my system, and the problem went away. The problem just popped back up yesterday. Let us know if you find a fix.
It could be a bad resistor but it could also be a short somewhere or somewhere I sent making good contact especially if it improves if you hit a bump/jolt the car in some way I would check the connections first then go to test the resistor
@@uncleandy7983it could be a leak somewhere in the system I would check that especially if adding refrigerant fixed the issue for more then a couple days
@mohammedabdulmannan7507 i figured it out, bad left side blend door actuator.
Man I'm stumped and Idk what to do anymore. 😔 I got a 06 crown victoria and the AC would work but barely blow. The high speed level felt like the lowest but each speed would be about a 1/10th faster than the other. Then I turned the knob to heat and it changed to heat..ok fine.. Well no it's not because when I went to put it back on cold it's stuck on heat.
I know blend door actuators are a common fail but so is the resistor. I'm lost
Your issue im willing to bet is blend door over anything
Would a bad blower motor resistor be a reason why I am only getting heat from defrost only?
No
Having the same problem
What would cause the high speed only to fail?
I would start with the fuse. It's happened to me before. If it is the fuse, you have to figure out why it went out.
my 2004 Mitsubishi Endeavor blower motor connections melted to bits, the new one is only getting 0.4 volts could that be a resistor?
It could be that or a blown fuse due to the short that caused the meltdown I would check for shorts first then the fuses/relays responsible then test the resistor
My climate control panel has power because led display is on. But when I push buttons it doesn't work, I wonder if this is the issue.
Mines doing the same did you figure it out
I got really slow flow on MAX
Same here.
Did you fix it?
What was the issue
My Kia soul only blows decent on 2, if I put on low or high, nothing at all
🔥🔥🤙🏽
You can clean the switch with electric spray cleaner too before you think it's the resister it was why my Ford truck just run on hi cleaned the switch and wa ahh
I DONT HAVE MAX AC ANYMORE 🤔