Thank you very much for this video. This solved for me the problem of warm air on the drivers side and cold on the other side. Maybe temporary, we will see.
Thank you for this important sharing. It was useful for me. I hope it is a permanent solution. Before doing the operation, the driver's side was blowing hot and the passenger's side was blowing cold. They are both blowing cold right now. However, when I first turn on the air conditioner, hot air passes for a short time and then turns to cold.
Hello, first of all, thank you for your post. The air vent on the passenger side of my car seemed to be blowing slightly warm air. I just performed the test and got a result of 1.0. However, after running a general test with my OBD device, I noticed the error code B1035(64) from the BCM unit. This indicates that a test could not be completed and that there might be a faulty part. Should I take this into consideration? What would you recommend? Thanks
I have tried on my giulietta whis has left/right heat difference problem it gave 02 fault code. Before you buy a used one try this. Because to repair the problem you have to remove whole dashboard. Think about labor you gonna pay apart from the parts..
Thanks very much for this video - at least I now know I don't need to remove my dashboard. After the result, I pressed the power button to end the test but the two temperature displays instead showed 26° on the left display and 20° on the right. Do you know what these numbers refer to?
Hi Neil, this is because the car is meant to be able to have two different temperature settings on each side, so if you change the passenger side it will only change that side, whereas if you change the main side when they’re both the same temperature, it will change both. (To bring it back to both being the same temperature, press “mono”)
@@simonebottino6964 Thanks for the reply - however it wasn't that (the dials were unresponsive and I had to cycle the ignition to get the HVAC system back to normal). It felt like they were sensor readings, but I don't know from where.
Thank you very much for this video. This solved for me the problem of warm air on the drivers side and cold on the other side. Maybe temporary, we will see.
Was the solution permanent for you? I wonder what the latest situation is?
Thank you for this important sharing. It was useful for me. I hope it is a permanent solution.
Before doing the operation, the driver's side was blowing hot and the passenger's side was blowing cold. They are both blowing cold right now. However, when I first turn on the air conditioner, hot air passes for a short time and then turns to cold.
Hello, first of all, thank you for your post. The air vent on the passenger side of my car seemed to be blowing slightly warm air. I just performed the test and got a result of 1.0. However, after running a general test with my OBD device, I noticed the error code B1035(64) from the BCM unit. This indicates that a test could not be completed and that there might be a faulty part. Should I take this into consideration? What would you recommend? Thanks
Damn. It came back as 01 for me but its still cold on the right and hot on the left
I have tried on my giulietta whis has left/right heat difference problem it gave 02 fault code. Before you buy a used one try this. Because to repair the problem you have to remove whole dashboard. Think about labor you gonna pay apart from the parts..
I can’t seem to find online what the issue is when the result is 2 instead of 1. I know that’s bad, but would be the root cause? Thanks
Thanks very much for this video - at least I now know I don't need to remove my dashboard. After the result, I pressed the power button to end the test but the two temperature displays instead showed 26° on the left display and 20° on the right. Do you know what these numbers refer to?
Hi Neil, this is because the car is meant to be able to have two different temperature settings on each side, so if you change the passenger side it will only change that side, whereas if you change the main side when they’re both the same temperature, it will change both. (To bring it back to both being the same temperature, press “mono”)
@@simonebottino6964 Thanks for the reply - however it wasn't that (the dials were unresponsive and I had to cycle the ignition to get the HVAC system back to normal). It felt like they were sensor readings, but I don't know from where.
Hmm, why does the right hand one in mine say 01.0 and no 00.0 - this is needless to say progress in working out my issue.
Had jij ook het probleem dat hij aan 1 kant koude lucht blaast en aan de andere kant warme lucht?
Io ho questo problema, hai risolto?
This is amazing. Thanks