ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2018
- Tangential Cutting knife.
CNC fabric cutting Machine.
CNC mach3 tangential cutting knife.
How to use tangential cutting knife in mach3.
CNC cambodia technology.
Cambodia .
3D model on Grabcad : grabcad.com/library/diy-cnc-f... - บันเทิง
Puedes hacer un video explicando como lo hicistes y configurastes el mach3 y como hacer el archivo para generar el codigo G
super Bro
Hola Junior quiero hacer un eje de corte tangencial para una cnc como me puedes ayudar para hacer una
Excellent DIY CNC fabric cutting machine. Have you got any build diagrams or a list of the parts you can share
You can check in my 3d design.
grabcad.com/library/diy-cnc-fabric-cutting-machine-1
I had previously used Mach3 for a CNC router. but for tangential cut it has never been. can you show how the settings for the tangent knife are
oh sorry for late
cdn.thingiverse.com/assets/8b/d1/75/35/bc/Settings_Alt-6.png
Hola, excelente, el motor que sostiene a la cuchilla está energizado como para girar hacia la dirección de corte? Si es asi, podrias explicar como es su conexión con la placa por favor? Muchas gracias.
Hola señor . Utilizo motor paso a paso y controlador de motor paso a paso (DM542). Puedes consultar en Google cómo realizar el cableado.
@@thearajr7583 muchísimas Gracias, buscaré a ver cómo me va, feliz día.
@@thearajr7583 cree que habrá algún tuto o vídeos donde vea el conexionado y configuración en placa? Muchas Gracias de antemano.
The job is very excellent. How do you calibrate the A-axis? And what program do you use for the coding?
hello sir, late to reply .
i used inkscape software you can find on browser. for the A-axis just calcul by known motor rotation step per revolution.
a-axis Step motor,
200step per revolution equal to 360 degree .
so 360/200 = 1.8degre per motor step .
thank you, now my CNC has a tangential knife 👍
I'm setting up a machine like that. but I can't get the rapid advance, I use vectric aspire to generate the code
i use Inkscape.
Thanks for the answer, I'm Francesco from Palermo, I bought a used CNC and the software is Mach3 I'd like to buy if the cost is right your cut knife for cutting cardboard and maybe even to meet your products, thanks and greetings from Palermo
this my final year project ,i made it for exam.
I can control the tangential axis completely. however axis A rotates very slowly. thus making the entire machine slow. can you help me ? how many steps per mm? how did you calculate?
the rotates Axis use Step/ Angle
Is there an option when you do G code to inform the rotational step motor for oscillating knife ?
Enable A or B or C axis .
Click Enable
Tangential Control in Mach3 Setting Tab, then go to Config>ports and pin>Motor Output>Axis(Enabled).
Go to Congfig>Motor Turning> in Axis Selection (Click A-axis and Set number pulse/revolution , velocity,Acceleration)
@@thearajr7583❤
Why are limit switch on left corner ? I heard that limits switches need to be on right up corner
for the limit switch you can choose by your own position.
Hello Sir
I really Like your machine
Can you tell me how is the 4th axis motor controlled?
using Mach3 board conect to Stepper Drive DRV8825.
@@thearajr7583 Hello sir
How to setup the 4th axis
Can you send me your email address I need to contact you
@@subashkavinda445 sorchamroeun168@gmail.com
@@thearajr7583 hi can I email you about the code? on 4th axis?
@@verkauf9310 yes ,can
Can u do that work with conveyor?
yes can.just calculate from linear to rotary
hi, what is the ideal bed material for used under tangential knife?
i use wood.
??
Comments keep getting deleted.
Great!!
How did you set up the X,Y,Z,A axis motor tuning?
What is the version of Mach3?
Is there anything to set in general config?
Can you send me the gcode file for testing?
I am desperate.
I use mach3 version r3.041.
just enable tangential control.
Hola buenas noches, que sofwere usas para generar el código g?
i use inkscape.
@@thearajr7583 Hello, thanks for your attention, the knife holder rotates on the spokes, how do you control that motor? I want to make a router for cutting, the question is how is that axis controlled? Thanks a lot
@@JoseLopez-jh7tb just Enable A or B axis on Mach3 board.
can you make a video explaining how to connect and use this tangential axis?
it's 2years ago.i can't review it.Sorry.
But i can tell you ,if you don't know how to connect.
please contact me by other way.
@@thearajr7583 yo me anoto por favor si es tan amable, deseo saber cómo es el control desde la placa principal hacia el motor paso a paso que sostiene la cuchilla. Gracias
@@GustavoGuevara123 Puedes usar Dm542 para nema23-56mm.
@@thearajr7583 ok, que placa usaste para conectar los drivers de motores, me refiero a la placa principal, es un Arduino, que placa principal usas para tu proyecto, no me refiero a los drivers ni nada de eso, espero haberme dado a entender.
@@GustavoGuevara123 www.google.com/search?sca_esv=65f1f60e92dda291&sxsrf=ACQVn0862CvxeRfdflp9PAeJTDqVAEg7dw:1711426044054&q=mach3+breakout+board&uds=AMwkrPubqdDjBmC7DhicLtpZCZYi47tzWk38Lacr1R64Xmsc97j8UTVu_CIWdNJvRFWmvRozkr01EwseaGim9hopj1_ELq1vlT8PjUaSqY8mWh8AofIWHe1fiwpd7KsPINK56TitvMEncUJItCeP70vvEcwxNvKNdsxvIp6Hcb6UZHPRrHBjijqre9cmC_dNo8Zhp8YnSZmbzphdD9Do9RlcKYewlZHb7nFeSA5a9_TPkdKrxtBfjEiAmtwrweAOfcrrTuGE-ZLs69QQ5Xc7ZHUkZEzDWpcwjZPl-3CUe2xk1xMXpEBKGvQ&udm=2&prmd=isvnmbz&sa=X&ved=2ahUKEwiD5KjrhpGFAxUU2zgGHQ9IDUIQtKgLegQIERAB&biw=1920&bih=945&dpr=1#vhid=vl2Z7wEW6QvOrM&vssid=mosaic
what is the bed material that you use? do you put something on top of the wood?
no
i just use polywood
good job
May you let me know what controller did you use and how many AXIS driver,thanks in advance
controller is Mach3 5axis breakout board and the software is Mach3 .
This machine has 4 axis ,so i used 4 driver motor.
Where did you get rotary cutter?
I made it myself. I bought from BookStore. It's handle fabric cutting knife.
what knife are you using for the fabric?
www.google.com/search?q=circle%20knife&tbm=isch&tbs=rimg:CXt_1xb7CdgxhYcwhD_1vzwVyf8AEAsgIMCgIIABAAOgQIABAB&hl=en&sa=X&ved=0CAIQrnZqFwoTCMiNiYTJ0fgCFQAAAAAdAAAAABAL&biw=1903&bih=937
i used this one . you can find in Book center.
Hola, What software do you use to generate the G code?
i used Inkscape.You can download for free.
What post process did you choose?
My i lnow what type knife do you use?
And how many layer this machine could to cutting?
This knife I bought from BookStore.
I don’t know specification.
I hope you can find in your local and can do it yourself.
www.google.com/search?q=paper+cutting+circular+blade+handle&tbm=isch&hl=en-US&chips=q:paper+cutting+circular+blade+handle,online_chips:rotary+cutter:xz3UeKJl7Rk%3D&prmd=ivmn&rlz=1CDGOYI_enKH945KH945&sa=X&ved=2ahUKEwiO48yhy8P3AhX4_DgGHf3UCi8Q4lYoAXoECAEQBw&biw=414&bih=622#imgrc=fn1v83d-FrlxSM
@@thearajr7583 tks u soo much sir
@@thearajr7583 sir do you have site plan / video for tangetial knife ?
Sorry, it’s was 4years ago.
All documents was lose in Hard drive.
how can use tangential cutting knife in mach3 ?
can you help me?
enable Mach3 mach3 tangential knife
Have you got any build diagrams etc. Or better still a website. :)
sorry for late
tell me your email,please.
@@thearajr7583 rhinotechltd3@gmail.com
Serioulsy great job are you still using the machine.
i stoped using it 2years ago. if you have any question i can help you.
@@thearajr7583 Thanks alot. What software are you using ? How do you have the axis setup ?
@@shaunlloyd8575 i used Mach3 software.
@@shaunlloyd8575 you can config Axis setup in the software .
@@thearajr7583 Thx. Do you know of any linux compatible software that would do the same job ? sorry i dont use windows
what is the minimum diameter can this machine do??
just 20-30mm diameter
Can i know what software u were using to control......
and something about the controllers u have been using....
i use Mach3 software.And use Mach3 controller CNC Breakout Board .
@@chamroeunsor8867 Thank you
grabcad.com/library/diy-cnc-fabric-cutting-machine-1
you can see My model machine where i post on Grabcad.
@@chamroeunsor8867 if you please may you give me the web link ,(from where did you buy it)?,thanks in advance
Price
not for sale
Aapka no. Do or iska price kitana he
sorry i can not understand