Mach3 Rotary Axis configuration
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- On this video tutorial, originally posted in Spanish; is intended to show how I configured the rotary axis on my CNC router, perhaps will serve as a guide on a similar situation for somebody looking for information on this subject, I am not an expert by any means all the steps that I use in this video I learned online and by trial and error. I start by showing how I calculated the gear ratio, followed by calculating the steps per degree for the main shaft gear
- แนวปฏิบัติและการใช้ชีวิต
Thank you sir, Your video helped to setup my rotary axis. Just perfect explanation. You are legend.
You are very welcome, thanks for your comment.
Awesome tutorial Carlos,thank you very much!
Glad you liked it!
You are the best at explaining, thanks 👏
Glad you think so! Thank you for watching!
Great explanation thanks señor carlos!
You are welcome!
Thanx for this explanation. Very usefull
Glad it was helpful!
Perfect explanation..❤ thanks a lot
You're welcome 😊Glad you liked it!
Thankyou..keep going Sir.
Always welcome
Excelente vídeo...
Gracias!
Great job thanks sir
Most welcome, thanks for watching!!!
thanks for the info
Any time
Thank you, sir. It's very helpful , if a program info about rotary ATC settings with mach3 .
Thank you!
thank u thank u thank u So Perfect
You're welcome 😊
Hello, I'm new to mach software. On the screen, it is showed only a 4th axis (only one rotary) but I found in many forums that it can support also the 5th axis. Please help me to understand If you can use the mach3 board for 5 axes and with which software
I am not very knowledgeable on more than 4 axis machining, however yes you can use 5 or more axis with Mach3 providing that you have a control board , to design and generate the g-code you can probably use a program like Fusion 360, or similar. Good luck.
thanks so much sir, please can you help me i installed rotary axis in pins of y axis as my machine setup design is using x- axis , z-axis, y axis as rotary axis and a-axis is tilting spindle head as i have mach3 4 axis not 5. how can i program it or using a definite postprocess which suits my machine design? i'm using powermill
I am not familiar with Autodesk software, so I don't think I can figure out a post processor for it. Sorry I can't be of much help, (other than what I explained on the video). Thanks for the comment and good luck.
Hello, can I make a digital machine without connecting the RS 232 cable from the driver to the computer with the mach3
Mach 3 is a parallel interphase, but you could buy a parallel to USB adaptor I imagine if your controller is USB, I never used anything other than 25 pin cable though. Good luck.
Homing of A axis is necessary or not and there will be power loss at the time of working. How to start from the same set point?
I have not thought about homing the A axis, when I get back to my CNC lathe project I'll look in to it. (As soon as I have a place to work).
@@CarlosMDominguez how to any tutorial ya any videos
how to any tutorial ya any vide
how to any tutorial ya any vide
If my controller does not have micro steps, how would the formula be, my machine control it with a richauto a11 ??? what should i do to be able to calibrate the 4th axis
You are going to have to search for specific information about your controller, maybe some TH-cam videos on the Richauto a11, seems that this controller uses its own controlling software independent of the computer, I am not familiar with it. So, I'm sorry I ca not help you with it. Good luck!
My machine DSP A18 4th Axis. A axis is bad. Please let me know the A axis parameters
Not familiar with DSP Device Technologies controller. This parameters are for Mach3 only. Sorry I cant help.
Hello i have error continuously on this axis
sorry to hear that. but I have no idea about what you are referring.