I love the channel, but the truck is lifted above factory specs in the front, and it rubs. Title of the video seems to be misleading. Good looking truck
@@TCcustoms_ Pretty sure its actually 3.5", since Ready-Lift says the spring level kit is 2.5" for the 2017-2019s...the 2020s are 1" lower stock, so replacing the springs will net you 3.5" for the 2020. Their website seems to ignore that little detail. Would have loved to compare this truck side-by-side with the TC Customs F250 4" BDS RA kit you guys did a while back.
So you were going to show us how to out 37s on a truck without lifting it....... Then the first thing you show is the 2 1/2 inch front lift kit???? LMAO ok thanks I'm out!! I actually have a 2018 with 37s on stock rims with no lift. Yep on full lock they just slightly touch the track bar.
So if I come down and buy a F250 tremor 6.7 powerstroke platinum with all the options what would the cost be and is there a way to take the engine break and put in another one thats a little more powerful?
@@Charlie-qb4sy Actually it is a known flaw on certain years of Super Duty. Mine had about 20k on it when it did going down Interstate and hit some slush. At 65 it went into such a bad shake on the left side I had to rapidly sliw down to 35 before it stopped. Has done it a few times since.
John 3:36 “He that believeth on the Son hath everlasting life: and he that believeth not the Son shall not see life; but the wrath of God abideth on him.”
Is what I'm seeing with the shocks..?? I'm assuming the bioscience shocks were on the front only in that video... Or you used a temp shock..?? What better shocks could I get as an upgrade forthefront..?? I have a new 21 F350... I'm assuming this will all theoretically work for mine as well....!! I like what you've done... I just wish I could tame the front ride down a tad.... It's rough, lol..... I know it's a 1 Ton, lol But.... just saying.... I only got into the video at the 2-3 minute area of your video, lol.... Thx for any help......
“Slight rubbing” to means the tires don’t fit. And having to cut the safety crash bars behind front bumper is not cool for me even if the rear (firewall) crash bars are intact. I like the houses though, unless there is some slight rubbing and missing safety features with them too 🤨
I hate how these damn rim manufacturers dont make a proper front center cap that allows you to use manual hubs without taking the cap off. Something needs to be done about this. Rim manufacturer's need to step up and do the right thing
You need to TC custom a Ford transit med or high roof cargo van A 2inch lift kit and 32 inch off-road radial tires. As this a very common mod to gave better ground clearance for people who are buying a cargo van to make into a camper ( it is becoming a very large market for cargo vans ( this is a large part of the market for Ram Promasters and Mercedes Sprinters)that ford is missing out on ( the internet make the Country a market place for a smart Dealership)
As he said they can eject the rocks.. bro there is rocks in the tire as you say that... not to mention they still rub haha. If I sent my truck to you and they still rubbed I would be pissed. These trucks are not cheap as you know so no reason to have tires rubbing. Anyone who bought this truck can afford to make the tires not rub. Not impressed at all with the work quality looks unfinished
You guys did a great job, thanks again for the shout out 👍
Thanks for the business bud! You were awesome to work with!
Did the rubbing ever become an issue?
I love the channel, but the truck is lifted above factory specs in the front, and it rubs. Title of the video seems to be misleading. Good looking truck
Click bate. A leveling kit is still lifting the truck!
Rubbing does not = "fit." just saying.
The click bait is no lift with 37s? Your dealership added a leveling kit. Am I missing something?
The truck is Leveled, not lifted. We were pretty impressed it fits 37s with just a leveling kit
Leveled is lifted, "Ford Motor Company" can attest to that. I like your video presentations & most of what I see from your dealership. Thanks.
@@TCcustoms_ Pretty sure its actually 3.5", since Ready-Lift says the spring level kit is 2.5" for the 2017-2019s...the 2020s are 1" lower stock, so replacing the springs will net you 3.5" for the 2020. Their website seems to ignore that little detail. Would have loved to compare this truck side-by-side with the TC Customs F250 4" BDS RA kit you guys did a while back.
Hard to argue when it literally says Lift Kit at 2:45…but it looks great. How about that rub though?
Slight rubbing, I'm paying 70k+ for a truck an there rubbing thanks but no thanks
Question: if you have the center caps on the front, how do you lock the hubs?
Make sure they are on auto before caps are installed Ford hubs offer manual and auto lock
What is the offset and backspacing on the rims to keep them tucked in the fender wells?
This truck looks just like @WorkPlaytv’s truck
So you were going to show us how to out 37s on a truck without lifting it....... Then the first thing you show is the 2 1/2 inch front lift kit???? LMAO ok thanks I'm out!! I actually have a 2018 with 37s on stock rims with no lift. Yep on full lock they just slightly touch the track bar.
I ordered a BDS 2.5” and a Speedo recal for my truck from you guys and am ready to order more from yall
So if I come down and buy a F250 tremor 6.7 powerstroke platinum with all the options what would the cost be and is there a way to take the engine break and put in another one thats a little more powerful?
How to fit tires on your truck without a lift while only lifting it two and a half inches. Smh
Can't believe I've been right down the street from you guys this entire time. Do y'all still have the 2021 f150 demo
Can they do lifted homes?
😂😏🤫 Alabama already known for some bad trends. Last thing we need is lifted double wides. Where does it end.
What was the final cost of this truck? I'm liking the look, but trying to figure out if something like this is possible budget wise.
wonderful video. I'd love the same setup, but in a lariat with the sunroof & f350.
Has Ford solved “death wobble”? Imagine that on a lifted truck.
DW happened to me with only 19k miles.
death wobble is not a design flaw. It is a truck with worn suspension. it happens on every straight axle front end 4x4.
@@Charlie-qb4sy Actually it is a known flaw on certain years of Super Duty. Mine had about 20k on it when it did going down Interstate and hit some slush. At 65 it went into such a bad shake on the left side I had to rapidly sliw down to 35 before it stopped. Has done it a few times since.
Really I wanted to know about doing it on factory 20’s.
John 3:36
“He that believeth on the Son hath everlasting life: and he that believeth not the Son shall not see life; but the wrath of God abideth on him.”
What does it mean?
The front doesn’t look like a 2024
Is what I'm seeing with the shocks..??
I'm assuming the bioscience shocks were on the front only in that video...
Or you used a temp shock..??
What better shocks could I get as an upgrade forthefront..??
I have a new 21 F350... I'm assuming this will all theoretically work for mine as well....!!
I like what you've done...
I just wish I could tame the front ride down a tad....
It's rough, lol.....
I know it's a 1 Ton, lol
But.... just saying....
I only got into the video at the 2-3 minute area of your video, lol....
Thx for any help......
The video description says "without lifting" and yet it's lifted!
“Slight rubbing” to means the tires don’t fit. And having to cut the safety crash bars behind front bumper is not cool for me even if the rear (firewall) crash bars are intact. I like the houses though, unless there is some slight rubbing and missing safety features with them too 🤨
Click bait. They could have titled it saying it's "leveled" but they chose to deceive. And it still rubs.
I hate how these damn rim manufacturers dont make a proper front center cap that allows you to use manual hubs without taking the cap off. Something needs to be done about this. Rim manufacturer's need to step up and do the right thing
Can you do the same Level with 13.5s? Maybe change the offset?
You lifted the front but the description says with no lift…
If it isn’t sitting at factory height......IT HAS BEEN LIFTED.
You need to do this video with the new 2024 F250 Tremor
But it's a 2019 with leveling kit.
How did you fix the speedometer being off after adding 37s?
Great looking truck but how did you recalibrate the truck to the larger size and not have a check engine light?
Awesome truck but I can’t unsee that crooked decal.
Hey that’s the i am 6”2 guy
6"3
Aight ... my bad 🤗 🤣
lol
Thank ...glad dude not mad ... miss by “ 🤣
i wish you guys were located in AZ this tuck looks awesome
You need to TC custom a Ford transit med or high roof cargo van A 2inch lift kit and 32 inch off-road radial tires. As this a very common mod to gave better ground clearance for people who are buying a cargo van to make into a camper ( it is becoming a very large market for cargo vans ( this is a large part of the market for Ram Promasters and Mercedes Sprinters)that ford is missing out on ( the internet make the Country a market place for a smart Dealership)
4X4 OPTION
Please add info or comment for the under seat storage
Leveled is lifted. Clickbait
Nice $100,000+ pickup truck.
Amazing looking Truck. You have done a fantastic job!
I have 2” rough country level pucks.... still going for 37x12.5 on stock 18s lol 😂
Did they fit?
All day long
Who makes the under seat storage?
As he said they can eject the rocks.. bro there is rocks in the tire as you say that... not to mention they still rub haha. If I sent my truck to you and they still rubbed I would be pissed. These trucks are not cheap as you know so no reason to have tires rubbing. Anyone who bought this truck can afford to make the tires not rub. Not impressed at all with the work quality looks unfinished
The customer demanded that size tires. After we warned him on the front end (that they will rub), he responded “I don’t care, put them on anyways”
Rear hub caps?
What is the difference between the king ranch and platinum
I'm moving to BAMA ALL ABOARD..
Ford.com will tell you.
Nice
Can you modify a 2013 explorer?
We haven't, but can! What you want done?
KO2'S are a better tire by far
😊💐Good Work👍
God Blessed
Love and Support from me😊💐❤
#soothemusic
😊💐Good Work👍
God Blessed
Love and Support from me😊💐❤
#soothemusic
How about buying “MADE IN THE USA” tires!!!! Toyo/Nitto are NOT made in the USA or most of the parts on the ford trucks.....
Looks too big, needs a 4” lift
Tires look too big
How do you go about re certifying the pickup? I want to do this with my ‘22 f250 with the HCTTP