Thank you very very much they told me the same thing that I need it to get a new radio I’ve been driving around like this for two years thank you Sir!!!!
Following the tutorial on using the radio's diagnostics (link below), I discovered that my radio was not receiving dimmer signals. Also, this particular fuse was blown. I replaced it and eventually that burned as well. So there is a short somewhere. Coincidentally, this issue arose when I installed an aftermarket Android radio. Next step will be to uninstall this new device and see if things go back to normal. - - - - - - - To turn on the radio's diagnostics program, press-and-hold "1" and "6", then press the POWER button. Press "4" to enter the dimmer test (as shown in the video). th-cam.com/video/PkOuuDqEt_0/w-d-xo.htmlsi=psf6aWA4tZN0UT-i&t=54
this was so much more helpful than anything ive seen online or on forums, thanks so much !!!
Thank you very very much they told me the same thing that I need it to get a new radio I’ve been driving around like this for two years thank you Sir!!!!
It actually worked for me. A very big thank you bro 👊
I tried changing that fuse, but it didn't work at all. Any suggestions?
On my Accord 2010 EX fuse number 6 on passanger side is for gear lever and coin holder lights.
I changed the fuse and guess what? Lights are still out.
isnt number 6 the abs/vsa fuse. Im not sure how that would affect the radio lights. do you know?
Vsa/abs is on drivers side
I'm having the same issue as you on my 2011 Honda Accord but every time I put a new fuse in it just blows it any idea what it could be
I’m having this same issue, did you find a fix?
Thats for interior lights, were they not working either?
For some reason my still didn’t work 🤔
what causing the fuse to popped?
hate to say this that was not the problem on other sub-models.
Your the best !
THANK YOUUUUUUU🎉🎉🎉🎉🎉🎉
very helpfull, thank you.
So I checked the fuse and it was blown but still no lights smh. Idk anymore.
Porque cada que lo cambio se vuelve a quemar???
THANK YOU!!!!!
Gracias 🙏 solucione el mío
Didn't work for me
Following the tutorial on using the radio's diagnostics (link below), I discovered that my radio was not receiving dimmer signals. Also, this particular fuse was blown. I replaced it and eventually that burned as well. So there is a short somewhere.
Coincidentally, this issue arose when I installed an aftermarket Android radio. Next step will be to uninstall this new device and see if things go back to normal.
- - - - - - -
To turn on the radio's diagnostics program, press-and-hold "1" and "6", then press the POWER button. Press "4" to enter the dimmer test (as shown in the video).
th-cam.com/video/PkOuuDqEt_0/w-d-xo.htmlsi=psf6aWA4tZN0UT-i&t=54
@@frankly8087 thanks Brother 💪🏽👑
@@frankly8087did it go back to normal after uninstalling the android radio?? I got one too but I don’t remember them going out after installing it.
@@frankly8087what fuse do I replace