How to change rear light on Peugeot Boxer Fiat Ducato Citroen Relay Dodge Promaster

[@mrfxr1695]

Same procedure is to change light bulbs in rear lights 👍😉

[@bojohanson3981]

Thanks for the exhaustive guidance! Today, I changed the rear lights on my Fiat Ducato in an hour, without any hickups, thanks to your video.

[@mrfxr1695]

All the best 👍🙂

[@nicodobben6820]

Thank you very much. Extremely useful video and good explanations. After driving with one brake light for a year I've now finally been able to fix it.

[@mrfxr1695]

You're welcome 👍😀

[@yetigee7307]

What size spanner required for those two large nuts which hold the unit in? Only asking because on Adria campervan conversions and no doubt many others, the access to the back of these light units is abysmal. Got a job to get hand in the access hole to start with - you can't actually get to see any bottom fixing. Have to use touch!!

[@mrfxr1695]

Thanks for asking, it is 17mm if I can remember right. Usually you can get them undone by hand

[@firstnamelastname2669]

Same with Autotrail. Can only get finger tips to the nuts. The Led swap out will have to wait. :-(

[@lisandropestana215]

Great video, with a lot of detail. Helped me a lot 👍🏻

[@mrfxr1695]

Thank you 👍
All the best

[@Christine_Viertmann]

Thanks for the video, it is helpful for our campervan! 🙂

[@mrfxr1695]

You're welcome 🙂
Happy campervan-ing !

[@craigsadler8794]

It would be useful to know the company that supplied the new fitting if you recommend it?

[@mrfxr1695]

@craigsadler8794 You can have them from here
Near side
amzn.to/3z2vDTN
Off side
amzn.to/45nYIFs
All the best 👍

[@neilwhiting9567]

Just to say there’s a plastic screwdriver in tool kit under passenger seat for undoing the nuts

[@mrfxr1695]

Many thanks for sharing this, it's correct. I've changed 4 of these vans and only had a tool kit on one. For some strange reason people don't bother putting it back in the van after use 🤷

[@fubar9872]

Any chance you kno how to do it in izoterm,there is no way to acces the light from inside the van...

[@mrfxr1695]

I don't really know. They must have made provision for it

[@fubar9872]

@@mrfxr1695 im after taking of patr of the bumper but cant reach it, might just resolve to angle grinder n ill make the revission. Thanx anyway bro.

[@mrfxr1695]

@@fubar9872 take it easy and all the best 👍

[@mrfxr1695]

@@fubar9872 that's shocking, converters should've made provision for it

[@fubar9872]

@@mrfxr1695 im noit going to use the van as an iseterm so i dont really mind to cut out the revission but i ratther there was a way "to change the lightbulb" without cutting the van lol

[@antd6993]

Cheers, will try tomorrow, just subscribed👊

[@mrfxr1695]

Many thanks
All the best

[@richardwhite9186]

Nicely done and shown ...thanks

[@mrfxr1695]

Thank you

[@decorman]

Very helpful, thanks 😊

[@mrfxr1695]

You're welcome 👍

[@richardstevens1024]

Thank you for your info

[@mrfxr1695]

Thanks 👍

[@johncarney435]

Very helpful. Thank you.

[@mrfxr1695]

Thanks 🙂

[@nickhoward9343]

Thanks

[@mrfxr1695]

All the best 🙂👍

[@lampertveeeeeeedesdddddd3615]

Thanks !!!

[@mrfxr1695]

You're welcome!

[@andrewhouston5434]

Thanks.

[@mrfxr1695]

👍
All the best

[@shahramhosseinabadi8888]

thanks mate

[@mrfxr1695]

You're welcome👍

[@chamil4225]

Elegancko

[@mrfxr1695]

Thanks 👍

[@edbo7083]

Thx!

[@edbo7083]

Good job !!