Multi Impact Driver Drill/Driver Restoration | National / Panasonic EZ6507 12V 1/4”
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2023
- National/Panasonic Multi Impact Driver 12 Volt
1/4” Hex Impact Driver or 1/4” Hex Drill/Driver
Made In Japan
Model # EZ6507 or EY6507
Extremely Rare!! Labels are all in Japanese
Features:
Tough, impact resistant housing
Powered by National/Panasonic's 12V "system" of battery packs
National/Panasonic built high performance motor with fan cooling delivers
maximum power and durability
Steel-planet transmission provide job site durability
Variable speed, Reversing, Electronic Brake
Feed-back circuit delivers maximum torque at all speeds
21-stage clutch for more precise torque setting plus Drill Mode
Specifications:
Chuck Type: Keyless Quick Bit Change 1/4" Hex
RPM Drill Mode: 0-650
RPM Impact Mode: 0-2,200
No-Load BPM 3,300
Clutch Torque 9 - 50 in-lbs (approx) 18 stages. 2.4 in-lbs per stage
Max Torque:
Drill Mode: 286 in-lbs.
Impact Mode: 1,100 in-lbs.
Capacity in Steel: 1/2"
Capacity in Wood: 1/2"
I bought this tool from Japan recycle shop only $15. It doesn't work anymore because the permanent magnet move and the battery is also dead.
I restore this tool by disassemble, clean every part, and rebuild new battery replacing NiMH by Li-ion battery cell.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show - แนวปฏิบัติและการใช้ชีวิต
![โอ้มายก๊อด! ไม่ถึงชั่วโมงหมดเป็นแสน 😅 [cc] แดนแพทตี้ SS2 | EP.42 |](http://i.ytimg.com/vi/OH2ShXfO6tA/mqdefault.jpg)
that tiny pin holds the entire drill together!
The grand master always do great job and never dissapoints anyone🇷🇴🇷🇴
I'm glad you like this video, thank you!
vintage restoration never fails to impress, top work !!!👋👋👋
Thank you very much!
Good job mister beautiful restoration beautifully restored well done
Thank you! I'm glad you like this restoration.
The ultrasonic cleaner seems to have worked really well this time!
Yes, It is. Thank you!
Beautiful restoration 😃😃
I love your work. dedication and time you put into making things perfect. I love vintage restorations.. especially when you restore flashlights. Keep up with an awesome work dude.
Love your content , very satisfying to watch.
I'm glad you enjoyed it, thank you!
Great job once again.
Thank you so much!
Nice job sir 👏 Great restoration 😊
Thank you kindly
Congratulations, great job.
Thank you so much!
Nice restoration and conversion
He is from which country?
2800 view ,why only 366 like?😮
Nice work .
Thank you!
Good Friend ...Thank you my friend for the video ...my Grearting from iraq to you ❤❤
Thank you, my friend, I'm so glad you like this video.
@@gear_showThank you my friend . Continued ....
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
You're welcome, thank you!
Four poles in dc motor and very powerfull. very rare in the old cordless tools!
Yes, that is right. Thanks
Another top job dude 👏👏👏. And looking at the corners of the screen, seems like your ever-reliable little cordless screwdriver is due for a bit of a clean-up 😁. 😎
You are correct, thank you!
Perfect Work Congratulation
Thank you!
Good job! 😉👍🏻
Thank you! Cheers!
Máy nhỏ mà khỏe thật, đúng là hàng Nhật 👍
Đúng vậy, bạn thực sư đúng.
Nice work! Quite complex the gearbox and somehow strange...
Yes, It is a bit complex and it was designed logically.
Too good restoration
Many thanks!
YOU IS MASTER, CONGRATULATION....
THANK YOU SIR!
You have great content! Have you considered making a printer run off of a Milwaukee battery pack? Job site printer would be handy.
Very nice restoration. What type of grease do you use ?
Do you use different grease if it's for plastic gears or metal gears ? Have you a favorite brand?
Thanks a lot !!
I went through 2 Milwaukee 1/4" brushless non fuel impact wrench. 1st one, motor seized on me. My employer replace it. Within a month of use, it seized again. Went and bought the fuel version and took my broken one to an authorized repair center to have it warrenty repaired.
This rc drill machine also good one to give away to your subscribers sir😊😊😊
That is a good suggestion, I will think about it, thank you!
Driver multi impacto 😉
Yes, it is.
I would love to see your videos❤
Thank you for alway support my works.
great work as always! only one question: where do you get all therse interesting models of instruments? you buy it on a flea market or you've clients who bring you all these things?)
He lives in Japan.
perfect
Thanks
I always put a like before watching
Lovely job well done, does the impact bit have a magnet on the end??
Thank you! Yes, that bit has a magnet on the end.
@@gear_show Thank You
like before watching 😁
Thank you!
ラジオペンチがフジヤなのが好き。
Great content, thanks) Can you tell me what kind of white powder you use to clean plastic?
It’s baking soda
@@reginaldbowls7180 That's what I thought.. thanks
You had to redo that last label . . . . . right? 😋
С настолько сложной отвёрткой никогда не сталкивался.
Güzel başarılı bir çalışma olmuş.
Teşekkür ederim, bu çalışmayı beğendiğinize sevindim.
MBK modifl Chuck universal menjadi Chuck wrich drill donk bang
Ya, Anda benar, terima kasih atas tipnya.
Why you choose not to repaint the plastics but just give them a clear laquer? Excellent work!!
New paint on plastic is not to last long.
@@gear_show I disagree. You can use a first hand primer and a second hand acrylic and the clear laquer at last. Then, the tool will look like a new one.
Wow
Rare impacts
Yes, it is.
Why don't you use your 3d printer for new modify plastic body cover
👍👏 P A R A B É N S 👍👏👏👏👏
hi i need to ask about 12v impact drill upto 4S1P (16.8v) or 3S2P (12.6V) where is the way of perfect performance ?
3S2P (12.6V) is the good choice.
Indonesia nyimak ....
Thanks
9:04 Ох ты. Велики ещё чинишь?
Да, я ремонтировал свои велосипеды, заменяя подшипники.
А отвёртка та что ты постоянно работаешь, она ударная или просто с трещёткой?
Отвертка, которую я всегда использую, это ударная отвертка Makita 7,2 В.
@@gear_show 👍🤝
HEY THERE SIR!
Please stop using chemicals this way,
when you breathe them in and they touch your skin, and basically it happens all the time.
I've seen you solder wires, for example, you make sure there's a device that pulls the air out of you,
but just as important, it's important that the chemicals don't reach you,
it narrows a lot of serious diseases.
Beyond that Thank you so much for sharing, your videos are great!
You're welcome! I do appreciation with your advice, I will think about this.
ดี
так себе решение не заменить обезмасляные в солярке подшипники ))))
7:56 Ммм... Цианокрилат и пальцы...
Этот клей безопасен для пальцев.
@@gear_show м, тогда ладно.
👍💯
Thanks
Покажите, как Вы делайте наклейки? Show me how you make stickers?
I make it with adobe photoshop.
😎😎👍👍
for sale?
I need to buy
Just for sharing video with fan.
шикарный аппарат,кострукция изумительная
Да, это японский продукт.
I own like this ☝🏿 and I have replaced batteries to lithium
So nice you have this model too
🇧🇷👏🏽👏🏽
Thanks
😃
Nice machine but it's lost speed control.
Why you know a bout that?
@@gear_show i see that when you make triger swicht.
Было бы ещё ипоксидка я думаю ты бы лучше оригинала сделал
Спасибо за идею.
내 최고 수면제..
도움이 되셨다니 기뻐요, 감사합니다!
Слабый ПЗДЦ ( но может мощный?
#gearshow hello dear,! please you Convert the juicer machine to 220 volts to 12 volts .
That fantastic idea, thank you so much!
@@gear_show welcome 🤗
That's one dry gearbox.
👏👏👏👏👏👏💯💯💯💯💯💯👍👌🇧🇷🇧🇷
Too plenty of used , out of service, old , vintages of cordless powertools , do had ban in the bins...( I know, because, ....many users, said so ...
Thanks for sharing !
Science-fiction
It power tool
the 421. Impact Drill or Wrench Restoration :/
Yes, thank you!
Уке сенин кылган иштерин жагат,ар бир ишти кылдат талдап жургузосун
Сизге чоң рахмат!
Э
Н
ИНН
Thanks