INSTALLING DS18 DOOR SPEAKERS ON MY SILVERADO!!!
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Thank you for watching!!!!
Website:
www.projectvc.com
Follow me on Social Media:
Instagram: _PROJECTVC
Mail:
P.O. Box 1570
Bellflower CA 90706
Product Links:
40k Transmission Cooler:
amzn.to/2XdaMsb
397 Transmission Fitting:
amzn.to/3dQ2P1F
USB Outlet:
amzn.to/3aLTSVi
The way you hooked it up is correct and the little “capacitor” is a filter for the tweeter. It filters out lower frequencies of sound so that the tweeter only plays that range of Hz that the filter allows. WELCOME BACK CUUHH
Thank you bruh!
Would a wire tap (aka t-tap) work ok for the tweeters?
Yeah they work to an extent but there are actual bass blocker for the tweeters. Let me find them I’ll past the link here.
Also so you don’t overload the amp on the ohms you can combine your speakers with the tweeters as a component set with crossovers.
Crossovers eliminates the use of bass blockers. Saludos from Chitown keep up the good work bro.
Your super underrated keep grinding love the vids
Appreciate it bro
I will refer crossover for tweeters for better protection, great job on Sound deadening, i did my whole back wall in my truck just need a bigger foam deadener for flooring, roof & doors
Hey bro jus my 2 cents but love these step by steps fun to wtch and it gives a feeling of being there wtchin in person but its your channel do whatcha want but love all the moves bein made always evolving ✊🏽
Appreciate it bro
If it were me, I would run that set up active. Your amp has built in crossovers, might as well make use of them. Its a bit more work to run all the wire but youre there doing it anyway. Running active means having separate runs to the amp. A run for each speaker.
I just put some infinity kappa components in my 09 Silverado and I bought a 5 inch door boot off eBay and drilled my own holes for the wire looks clean and on eBay they sell speaker mounts that are thicker plastic makes it real solid
4:56 I was thinking of that before he said it. We is so funny week up worth the good videos
I love that Tundra right behind you in the very first clip. Also I'm looking at some of these speakers
You’re going to need a crossover to wire the tweeter to the mids like that.
It’ll turn the 1 channel coming in, into two separate channels and help isolate the highs to mids better.
@@luismurillo23 what if you run tweeters just to the deck wires??
@@royridge7792 you can, the only issue is that you’re going to get a really distorted output. The crossover helps clean out the outgoing signal
Does it have a crossover bro? Should be like a lil amp looking box where u hook up the mid n tweeter then to the amp...should be labeled
Truck is looking awesome Brutha !!! So those speakers don’t come with a crossover like most component speakers do ?
Can't Wait To Hear Them Looking Forward To Your Next Video
I installed mid range speakers last Saturday and omg bro they are so loud and clear
Hey bro are you using amplifier whit this speakers?
@@albertosalomon7342 if you want full potential from mids and highs it's best to run them off a 4 channel amp instead of the head unit
Saludos desde fortworth tx
Saludos a la gente de fortworth !’
Forth forth
How does it sound with those speakers? Need to replace all 4 of mine in my 2500hd silverado and i like what you did with yours.
Just ordered mine for my rear doors,, they are 5.25 hope they play well,,
Anyone know where or what kind of box I can fit in a 2003 single cab Chevy Silverado?
Fairly new to car audio and looking to get the same set up in my Silverado, does the sound Mat actually make difference? Pros/cons?
Just go cheap with sound deadening. It doesn’t make too much of difference between brands. Sound deadening definitely makes a good difference in quality. I did 80 mil Kilmat butyl and 100 mil foam insulator over it. Sounds great and surprising helps with keeping the hot/cool AC in my truck for longer.
The connection of ur tweets is fine just make sure the spade connectors are tight on the speakers
Bro... you fucking killed it
When you set up a speaker with a tweeter in the amp with full pass, does the speaker pick up the high frequencies that the tweeter gets? Or all those high frequencies are only played by the tweeter.
Didn't you already upgrade the door speakers
Just cover up the openings in the doors with the s/p and put some on the back of the door panels
👍 make sure that your amp is at Full Range at 80 Hz n Up...
That's the way to do it!
Excelente trabajo camarada saludos
I just got my sticker today 🥵👌🏽
Thank you for the support
are these the 250RMS speakers?
Saludos compa, porfavor aga otro video de estos explicando como instalar las bosinas de atras de los asientos.
Saludos mi compa asta Duranguito
Saludos!
The way I do it connect channel 1,2 with the Twitter and channel 3,4 mid speakers
Animo COMPA
Hey bro en las puertas tienes cableado o usaste el mismo de fábrica
Very helpful video
You connected the tweeters right bro 👌
Tweeters just to radio no amp
How did you get the speaker mount to fit, I got the same one and wouldn’t fit
I'm trying to install my speakers on my doors to.i only have a keywood radio,2 6x9 ,2 dash speakers . I don't have No amp no cross over were can I connect it to?
You installed it right bro
where did u post the tweeter? Did your truck come with the stock tweeter I am not sure mean?
On my nbs, the oem dr has a tweeter when I swap them out the oem wire from the 61/2 are the same color wire that run to the tweeters, I think u be ok. I think it Matters when ur running something bigger them 4 channel amp, how much did u spend on the Material for the 2 doors
Hey where could I get some for my 2015 Chevy Silverado dash? The size is 2 3/4
I bought same adapters but can't fit my ds18 neo due to the basket being to big any tips?
What size door speakers ? I bought 6.5 inch
What time of speaker spacer did you put on the truck?
Bro I have a question if you wanna put 8s how would you do it to make it look stock and everything
Good content 🔥👍
Dope video
Where did you purchase those speakers bro bro , I’m from bell and I’ve been looking for ds18
eBay
Checkout my previous videos. I show you the link to everything
Hey bro I know it’s late and you probably won’t reply , but what size spade connector did you use ?
Saludos desde los altos de jalisco... Y ags
Dónde agarro los adaptadores para las bocinas
Are they still working good?
Can you please get in touch with me I live in Upland trying to get some work done on my truck really hard to find somebody to Dyno it
Do you know if the 5.25 ds18 fit without the window hitting?
what are those rims called and what size is the rim and tire?
Can I use the old wires?
would you need an amp for these speakers?
Where you buy any stores?
Buy yourself a crossover I’ll be more safer then the little capacitor
Wat radio is that
6.5 are 4.85 lbs
More uploads
arturo juarez gane yo
First
How much were those Ds18’s?
They about 250$ for all 4
What amplifier do you use?