I put 5.25" skar in my rears , 6.5" skar in the front. Used the factory mounts in the back ,modified. Red wolf 6.5" brackets for the front. Don't buy Scosche brackets they suck. fyi anybody looking to do this.
I just noticed those 6.5 speakers have the positive and negative terminals about the same size and the adapter has one that's very thin and it's too small for the negative side, how'd you work that out?
no I bought them on Amazon 2 Pairs Car Speaker Wiring Harness for Select Chevrolet/GMC/Buick/Cadillac Vehicles Aftermarket Speakers Adapter Connector a.co/d/aKVl3Un
Porque no pusiste 2 ways in the back for midrange instead of vocals and did u add tweeters to the back cause only the pillars got tweeters.porque no comprar un 2 way component para las de enfrente y con nuevos adaptadores?
I can save a couple bucks and modify my old brackets. I notice old brackets snap into doors, does anyone,you notice any rattles,rattling from the snap ins? You made it look easy.
Great video! Used it to install mine. But I had a question. I put in 4 6.5" speakers in my Silverado. I connected all the speakers pos to pos and neg to neg using female spade connectors. I put in all 4 speakers and the voice sounds loud but they have absolutely no bass. IS that how these speakers are or do you think I may have connected them wrong? I used a diagram I found online for wiring
Did you notice a difference like much louder and clear I recently got skar mid range and I can’t notice a difference I prefer the stock ones there way louder at like 15 volume compared to the new ones having to turn it up all the way 🙄Any recommended speakers not to pricey like apocalypse
I got the exact same ones with the wiring harness but the harness doesn’t go in bc one of them is big the other one is small and on the speaker they are both big
![“อาร์ต พศุตม์” เกือบเอี่ยวทุกคดีดัง เอ๊ะไว้ก่อน ไม่มีอะไรได้มาง่ายๆ | แฉ 16 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/0Gx-0-kUBv8/mqdefault.jpg)
![[DRIP] ‘BILLIONAIRE’ PREVIEW](http://i.ytimg.com/vi/m0eXQD0gIeE/mqdefault.jpg)
I put 5.25" skar in my rears , 6.5" skar in the front. Used the factory mounts in the back ,modified. Red wolf 6.5" brackets for the front. Don't buy Scosche brackets they suck. fyi anybody looking to do this.
Beautiful work
I just noticed those 6.5 speakers have the positive and negative terminals about the same size and the adapter has one that's very thin and it's too small for the negative side, how'd you work that out?
Hey. Bro I honestly didn't have any issues with the wiring on the ds18s they plugged right in.
What were the connectors that you used for the door speakers? Great video! 👍
I was wondering the same thing, did you buy the green connectors from the ds18 website?
no I bought them on Amazon 2 Pairs Car Speaker Wiring Harness for Select Chevrolet/GMC/Buick/Cadillac Vehicles Aftermarket Speakers Adapter Connector a.co/d/aKVl3Un
Hey Mario. I'm in Austin as well. Where did you get your rock lights installed? I have a 2011 Silverado Crew Cab in need.
I installed them myself.
i’m sitting behind you in traffic right now
Porque no pusiste 2 ways in the back for midrange instead of vocals and did u add tweeters to the back cause only the pillars got tweeters.porque no comprar un 2 way component para las de enfrente y con nuevos adaptadores?
I can save a couple bucks and modify my old brackets.
I notice old brackets snap into doors, does anyone,you notice any rattles,rattling from the snap ins? You made it look easy.
No rattling what so ever there holding fine.
Great video! Used it to install mine. But I had a question. I put in 4 6.5" speakers in my Silverado. I connected all the speakers pos to pos and neg to neg using female spade connectors. I put in all 4 speakers and the voice sounds loud but they have absolutely no bass. IS that how these speakers are or do you think I may have connected them wrong? I used a diagram I found online for wiring
I appreciate it bro and yea ds18 are voice speakers your really not going to get bass out of them.
@@lifted_mario8071 thanks for the quick reply. Voice is great though. Do you think the double din improved them a bit? Do you have an amp for yours?
Double din definitely helped out and no amp there connected straight to the double din
@@lifted_mario8071 ok. Thanks again. I’ll work on that double din.
No problem bro.
How’d you get the speaker to stick to the old bracket?? I did the same thing but I can’t get get it to stay
I used screws to screw to the bracket from the lip I left
Aye bro I got a question how did you make the negative side of the wires fit on the ds18’s?
Hey bro honestly I didn't have any trouble with the wiring. To the ds18s they plugged right in
What name of that kit u got for steering wheel control with radio?
Don't remember the brand but I bought it at Walmart.
What speaker connectors you use bro to connect to the original speaker harness?? I don’t want to do no Mickey Mouse 😂
I bought them from amazon bro not sure if I have the link anymore.
@@lifted_mario8071 ok yeah I been trying to find them but I don’t know which are the correct ones
@tee7200 let me see if I find the link.
@@lifted_mario8071ok thank you 🙏
2 Pairs Car Speaker Wiring Harness for Select Chevrolet/GMC/Buick/Cadillac Vehicles Aftermarket Speakers Adapter Connector a.co/d/2ekA71r i
Where did u get the connectors for the speakers ?
At Amazon
what adapters did you use for the speaker’s?
I used the stock ones I just modified them so the speakers would fit.
What Exact harness did you use for the steering wheel controls?
It's the axxess integrate aswc-1 I think I bought it from auto zone.
Crux steering control is the best eazy install or axxess
How did you connect steering wheel controls? Helps plz🙏🏽
I bought a separate harness just for the steering wheel controls I can't remember if I got it from auto zone or walmart
@@lifted_mario8071 ah ok bro appreciate it🙏🏽
Where did you get the bracket for the stereo ?
I think it was auto zone
Do you need to upgrade the amp or you can use the stock one ?
I used the stock one.
Thanks man 👍🏽 and how are speaker holding up ? Ran into any problems with those DS18 yet ?
No problems yet still holding up good.
Whats your wheel and tire setup?
Wheels are moto metal 20×12 on 35s toyo m/t open country country.
Which pioneer radio is that
It's the avh-200ex
Are the speakers on the back a different size
No there all same size 6.5 .
Appreciate it boss
No problem bro.
Did you notice a difference like much louder and clear I recently got skar mid range and I can’t notice a difference I prefer the stock ones there way louder at like 15 volume compared to the new ones having to turn it up all the way 🙄Any recommended speakers not to pricey like apocalypse
I actually did hear a difference bro more voice wich is is what I wanted since I am adding some subwoofers.
Can u add the link for the speakers?
DS18 PRO-X6.4BM Loudspeaker - 6.5", Midrange, Red Aluminum Bullet, 500W Max, 250W RMS, 4 Ohms - Premium Quality Audio Door Speakers for Car or Truck Stereo Sound System (1 Speaker) a.co/d/acwJu6P
I got the exact same ones with the wiring harness but the harness doesn’t go in bc one of them is big the other one is small and on the speaker they are both big
What amp ur running
I'm not I just hook them up with the head unit.
@@lifted_mario8071 nice
What year is your Silverado?
It's a 2012.
For the radio what adapter do I get cause I have a 07
You the best all these other Mickie mouse ass mofos no sabo kids en verdad no saben
Appreciate it bro.
@@lifted_mario8071 just got to show love when it’s done professionally, stay blessed 🙏