Getting Started with ESP8266 (ESP-01) module | How to program ESP-01 module

Hello everyone.
This video is about ESP-01 module.
ESP-01 is a WiFi module which allows Microcontroller easily access to WiFi network.
But, this module has a built-in 32-bit microcontroller and 1 megabyte of flash memory.
This module can be programmed easily by using Arduino IDE.
When you buy the ESP8266 ESP-01, it comes with a pre-installed AT firmware. It is possible to program the chip with another firmware such as NodeMCU, for example. However, AT firmware is compatible with the Arduino IDE.
Buy ESP-01 - www.electronics.com.bd/ESP-ES...

[@Ms6RB-qf7il]

if anyone having a problem getting the blink example to work after a successful update.
change the value 2 used in the code to 1.
ESP-01 -> Pin 1 or ESP-01S -> Pin 2

[@JuelzFpv]

Got the Berner instramental......love it....

[@SpeccyMan]

instrumental

[@aimusic164]

How to delete program from esp01

[@sarahdike30]

Can I use the adapter without a button underneeth

[@vicv6831]

I think you can connect the pins with a wire right before turn on and release later. If you are deft enough :)

[@Francesco_P]

Does this module have a i2s interface?

[@ElectronicsBd]

yes.

[@wurstelei1356]

@@ElectronicsBd So in theory, it would be possible to connect a camera or a mic to it right ? That's very nice.

[@Drakanx]

what if i don't have usb adaptator?

[@ElectronicsBd]

You can use arduino to program it.

[@HealthyBodyNutrition]

@@ElectronicsBd IF I USE A ARDUNIO MY gpio0 IS CONNECTED TO THE GROUND SO WHERE SHOULD MY Gpio2 BE CONNECTED