Hi everyone - It's come to my attention that there has been someone masquerading as myself, responding to some comments here with a link to a Telegram chat to win a prize from me. THIS IS A SCAM, I am not holding a contest, nor do I have a Telegram account. PLEASE DO NOT RESPOND TO THESE MESSAGES!! It's happening on a lot of my videos, I'm taking steps to remove them manually, but as I have 162 videos, it will take some time. If you do run across a suspicious comment, I would appreciate you letting me know at info@dronebotworkshop.com. Thanks! Bill (The real one!)
Something tells me that passwords and api keys aren't "pretty safe from prying eyes" especially if they're stored unencrypted in the EXTERNAL flash chip. After watching the kingpin video about recovering crypto from the hardware wallet, anything must be possible.
Hi BILL - thank you for taking care of EARLE PHILHOWERS Software-Masterpiece - the Arduino -PICO-CORE- which is covering all the special functions of the PICO. In the old IDE 1.8.19 it is running reasonably stable , but in the new IDE 2..0 i often have upload-problems and the procedure is very slow. BUT there is good news : The PICO EARLE PHILHOWER-version is now ( since a few days ) running in VSC-PlatformIO without any problems and we have all the benefits of a modern Software-Developement-system in the Arduino environment. I hope, this will not be your last video on this magnificiant new board . One idea would be to cover the advanced PICO solutions of the tft_eSPI library of the " library artist" BODMER . Greetings from germany .
I've been waiting to get my hands on a Pico-W since they were announced. Both SparkFun and AdaFruit are regularly sold out. Where are folks finding this unicorn?
In my opinion, the ONLY reasons to choose a Pico W instead of an ESP32 are: 1. The very minor price savings if you absolutely don't need any of the ESP32's better features. Or 2. Your going to make use of the awesome PIO feature of the Pico and you need WiFi.
@stefflus08 Programmable I/O, or Programmable Input/Output. It's a feature the Pi Pico's have that other microcontrollers don't have. It is _sort of_ similar to a very small FPGA.
Very thorough video, many thx. What would be very useful would be a simple technique to help us avoid hard coding SSIDs and passwords into programs. Meanwhile please keep up the great work 😀👍
Have an ESP6266, checks if WiFi is available (if not deep sleep, hour), checks if MQTT broker is available (if not deep sleep, 15 minutes), reads sensor, send data to MQTT then deep sleeps for 15 minutes then repeat. BIG QUESTION: Can the PICO W consume less power than the ESP6266. Its on a battery and connected to a small solar panel. MQTT broker is a Rpi. Both the Rpi & WiFi are off at night when I sleep.
The reason that I'm looking into the Pico over the ESP32 is analog to digital conversion (ADC). The ESP32 has a known inaccuracy in its adc where the value can be off by as much as 6%. Worse is that the error varies board by board, so compensating is virtually impossible. I've tested the Pico's adc and found it to be accurate within 1%. Fortunately, I only need 3 adc inputs, so the Pico should work just fine.
Can you make an over current,under current,under voltage protection using WCS hall effect sensor ,Voltage sensor (maybe ZMPT101B AC Single Phase voltage sensor ), 5V Relay with I2C 128x64 OLED display (SSD 1306) ,Arduino Uno For AC loads (Pool pump in my case ) this kind of protection is really helpful. I hope that with some thinkering we can use the under current for motor dry run protection . I actually bought all the mentioned components but i can't get it to work . Obviously am a bit new to adruino . It would have been very helpful if you could make the same 😊
Useful information well presented. However the ESP32 comparison is a bit tendentious. The PicoW has four cores total, two M0 in the 2040 and the M3 and M4 in the CYW43439 as well as the unspecified amount of SRAM and ROM in the Wifi chip. Sure these are not available to run user code, but looked at that way, some of the resources of the ESP32 are used by the radio stacks and are so also not available to run user code. A power consumption comparison would be illuminating however and I suspect ESP32 has the edge there.
Thanks for the video! So given your comment that the board only seems to operate in station mode do you think that means WifiManager won't work? Haven't been able to get one yet so can't try it.
Any chance to see NavSpark products mentioned? They seem to be good choice when one needs high acurracy GPS position for arduino, they have arduino nano like dev boards too. Unfortunetlly not many resources on those.
Thanks for another great tutorial! As with any insignificant pronunciation slippo, there's always some smartass to point it out. As I am working for that company, lemme do the honors this time: For "Infineon" (the producer of the Wifi chip on the Pico W) cut the "ity" from "Infinity" and add a "neon" - or listen to it named here: th-cam.com/video/rpV7hKh_JVc/w-d-xo.html And please take pride in the quality and thoroughness of your videos if folks have to go to such great length to find something to criticize ...
Nice tutorial! One more advantage of the RP Pico is that it has PIO with DMA which is a great feature:) Using the native Pico SDK would be even faster than Code generated by Arduino IDE :). I still prefer ESP32 family tho :d
- The RP2040 can work at 240MHz! - PICO exposes 27 GPIO... ESP32 has ONLY 25 usable GPIO since it uses 7 IOS for Flash Memory! - PICO has PIO! This is a big plus! For kids and curious people who don't really know how to program and just cut and paste pieces of "arduino" code, they don't even know what PIOs are... - PICO does not need a programmer! It has mass storage emulation, just copy the .elf file and that's it! And if we are programming in Python, we can run the program instantly from the editor/IDE without having to blink.
Great video. Good motivations for why you may want to use C and/or Arduino IDE: - familiarity - speed - mature 3rd party drivers and samples for legacy peripherals And I would add: - because I simply don't want to use Python in any environment ever (my reason? I don't need one)
Have you ever made a project with raspberry pico, stepper motor, and a4988 driver sir? If you have, I’ll be greatfull to watch it 😊🙏🏻 thank you, GOD Bless you and all of your family 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
BTW I had "error: tls: bad record MAC" during plugin installation. I just closed the Arduino IDE then reopened it and made BOARD MANAGER -> INSTALL again, after the second attemps it was successful.
In terms of content, I am looking for a way to store the access data for the WLAN securely, i.e. not in a separate file as plain text. As the RP2040 does not have a CryptoChip, the integration of an external chip such as the ATECC608A would be a possibility. But to be honest, that's a bit too much for me without help...
I finally got my hands on 1 of each. Pico, Pico-W. My PC does not recognize them when plugged into USB. So, I can’t I can’t do Arduino.IDE. Looking at my Raspberry Pi 3b……. HMmmmmm?
Greatings from France. I was interested by pico, specially for Wifi capabilities. I have programs for Arduino nano in C langage but now I can simply translate them for pico if I want to add Wifi capabilities. Thanks. I have subscribed to your channel.
Hi Bill! thank you for your video. I am wondering if it is possible to reverse this communication, which means that when we press a physical button on the pico w, something is triggered in the website
thank you very much for your excellent work. your videos are really very educational and allow those who are beginners as well as others to follow you well. thank you !
will you be doing a video on the sparkfun RTK GPS modules and how to use them with arduino? it was mentioned in your GPS video that you would do a seperate video on that technology.
Hi I am very novice at this sort of thing, I do not know how you made the GUI for clicking the LED on & off, nor the GUI with the slider for changing the servo position Thank you Kelly
Thank you, I want to build commercial iot device with pico w. How could I let the none tech users configure pico (ideally via a mobile app) to connect to their own home Wi-Fi hotspot without changing and recompiling the software source codes?
I got my first Pico after they released the SDK - in March of 2022. I didn't even look at Micro/CircuitPython :). I've recently been doing a lot of AI work with TensorFlow, so I'm more comfortable in Python. I recently gave CircuitPython a try and it wasn't half bad for non-time critical tasks. I'm still way more comfortable with C++ (20+ years experience vs about 2 years experience in Python).
Thanks for this video! I thought my Pico W might have been broken when I couldn't get blink working. I was unaware of the different pin for the onboard LED.
Hi Bill, You say at 1.32 the other videos on the tubes did not leave you much to cover? This being said, your videos are so much more informative and explain in such detail, it leaves very little that needs to be answered. The 1st video I ever watched of yours was (in my mind) too boring... but, once I got through it, I was in awe and realized WHY there was so much information and even went back to start it again. You're one, if not in my mind, of the best tutors on the tube's Bill. I hope that we see more videos on the Pi Pico W
thank you very much for the video. I got my pico blinking in 20 mins following the clear instruction. I still decide to go back to python, for it's real time REPL, which is much more user friendly for someone like me who knows very little about coding. I can actually type and run code like in terminals. I can understand c++ code may run faster and less resourceful than python. Until one day I may code a project really cooks the pico W with python, then I will be able to come back here and try to get used to the code-compile-upload-execute cycle. Great video!
Thanks for the tutorial! I am new to the pico (and Raspberry PI), but having extensive experience with Arduino microcontrollers this makes it easier for me to wrap my head around it. :)
Could anybody recommend a few good shops in Canada if any to buy generic parts, boards, and such. Hoping to possible find a good all in one shop for less shipping costs. Thanks.
Bill, Thanks for a great video. With my pico w and arduino IDE 1.18.13, I have to reset the pico each time I upload. Any thoughts what I've got set wrong?
A very good video, thanks! What is the best solution to power the Pico W from a battery? 18650 or AA batteries? How many volts should the battery have to last the longest? I will use a temperature sensor that draws very little current.
Can Arduino will help me for keeping rectifier output records in terms of online or offline means Electric Signals can be stored and display by using Arduino so we can monitor DC current and Voltage.
I cannot send a message in the forums yet, So, Bill, Please, What program do you use to show your wiring diagrams? It is clean and I need to design some wire management. Thanks. Great videos
Hey Bill ,absolutely love your videos. They are great for hobbyists like me, just dipping their toes in the water. Can you please make a video on using micropython with the ESP32 as the ESP32 does support micropython so it might be interesting to see it being used with micropython
Hi Bill, thanks for your video. Your videos are great. But something remains unclear to me. when I upload the program into pico, the microcontroller's USB is disabled and the serial monitor does not work. Please explain how you did to open the serial monitor?
A little disappointing that they are not enabling the Bluetooth when it is already on the chip. Still, an interesting board none the less. Maybe it was easier to get certification with the bluetooth disabled.... It would be nice if they could move to WiFi 5 on some of these boards. More for power svings than speed, but I guess there is a cost to look at too.
very nice work as usual keep the good work up .. i do need to know something if it possible how i can connect esp32 to my running web site ? i have website published and working and i do need to send some data from esp32 there but i could not setup client in the website to receive data from esp32 or send to it i tried to use mqtt but the problem is most of is the mqtt require ssl and i do not know to set that up
no, strings are stored as strings during compilation, it is up to programmer to obfuscate strings if needed... you don't even have the basic understanding of it... YT, why?!
Most ESP boards I've used (D1 Mini and NodeMCU) only have 6 completely free and usable GPIO pins, with several others being usable with restrictions like being high or low at boot or being serial RX/TX pins also. This is far too few for many projects and I've found myself using an Arduino and sending wifi commands over serial to the ESP board so I can take advantage of more IO pins. I ordered the Pico W as it appears it has more free pins, more like an arduino with wifi.
As usual, excellent content! As concerned to windows versions, they share same folder (Arduino15) so packs become available in both versions. Apparently, linux versions work in same way.
One problem with the ESP32 is the quality and consistency of boards varies all over the map, and the documentation is not the best. The Pi Pico has great documentation and the hardware is consistent.
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 2 | 29 ก.ย. 67](http://i.ytimg.com/vi/r3lfLNH6Ke4/mqdefault.jpg)
Hi everyone - It's come to my attention that there has been someone masquerading as myself, responding to some comments here with a link to a Telegram chat to win a prize from me. THIS IS A SCAM, I am not holding a contest, nor do I have a Telegram account. PLEASE DO NOT RESPOND TO THESE MESSAGES!!
It's happening on a lot of my videos, I'm taking steps to remove them manually, but as I have 162 videos, it will take some time. If you do run across a suspicious comment, I would appreciate you letting me know at info@dronebotworkshop.com.
Thanks!
Bill (The real one!)
Something tells me that passwords and api keys aren't "pretty safe from prying eyes" especially if they're stored unencrypted in the EXTERNAL flash chip. After watching the kingpin video about recovering crypto from the hardware wallet, anything must be possible.
Hi BILL - thank you for taking care of EARLE PHILHOWERS Software-Masterpiece - the Arduino -PICO-CORE- which is covering all the special functions of the PICO.
In the old IDE 1.8.19 it is running reasonably stable , but in the new IDE 2..0 i often have upload-problems and the procedure is very slow.
BUT there is good news : The PICO EARLE PHILHOWER-version is now ( since a few days ) running in VSC-PlatformIO without any problems and we have all the benefits of a
modern Software-Developement-system in the Arduino environment.
I hope, this will not be your last video on this magnificiant new board . One idea would be to cover the advanced PICO solutions of the tft_eSPI library of the " library artist" BODMER .
Greetings from germany .
I've been waiting to get my hands on a Pico-W since they were announced. Both SparkFun and AdaFruit are regularly sold out. Where are folks finding this unicorn?
Pi Hut maybe
I bought a Pi Pico, and 3 days later the Pi Pico W came out!! *DAMN IT !!!!!*
Wow - a whole $5 wasted - rofl
Thank you for a beautifully clear and excellent tutorial. Now I can use my Pico w.
In my opinion, the ONLY reasons to choose a Pico W instead of an ESP32 are:
1. The very minor price savings if you absolutely don't need any of the ESP32's better features.
Or
2. Your going to make use of the awesome PIO feature of the Pico and you need WiFi.
What's a PIO feature?
@stefflus08 Programmable I/O, or Programmable Input/Output. It's a feature the Pi Pico's have that other microcontrollers don't have. It is _sort of_ similar to a very small FPGA.
Thanks for your advice and excellent suggestions.
Very thorough video, many thx.
What would be very useful would be a simple technique to help us avoid hard coding SSIDs and passwords into programs. Meanwhile please keep up the great work 😀👍
Have an ESP6266, checks if WiFi is available (if not deep sleep, hour), checks if MQTT broker is available (if not deep sleep, 15 minutes), reads sensor, send data to MQTT then deep sleeps for 15 minutes then repeat. BIG QUESTION: Can the PICO W consume less power than the ESP6266.
Its on a battery and connected to a small solar panel. MQTT broker is a Rpi. Both the Rpi & WiFi are off at night when I sleep.
Is the ESP6266 a new model? I have only seen the ESP8266.
But the servo is only turning 90° at 40:49, or did I understand something wrong?
Yet another outstanding video. Many thanks for sharing Bill 👍👍👍
how about you try the waveshare 5g hat.
Thank you once again for such excellent content, so professionally put together, comprehensive, articulate and right up to date.
The reason that I'm looking into the Pico over the ESP32 is analog to digital conversion (ADC). The ESP32 has a known inaccuracy in its adc where the value can be off by as much as 6%. Worse is that the error varies board by board, so compensating is virtually impossible. I've tested the Pico's adc and found it to be accurate within 1%. Fortunately, I only need 3 adc inputs, so the Pico should work just fine.
This is horrible news! I want to make a diy gamepad with 2 analog joysticks with esp32.
Again, a very nice video. I’m always enjoying your videos. Thanks Bill.
41:00 Looked more like 120 deg rather than 180 deg???? Maybe only 90 deg????
Can you make an over current,under current,under voltage protection using
WCS hall effect sensor ,Voltage sensor (maybe ZMPT101B AC Single Phase voltage sensor ),
5V Relay with I2C 128x64 OLED display (SSD 1306) ,Arduino Uno
For AC loads (Pool pump in my case ) this kind of protection is really helpful.
I hope that with some thinkering we can use the under current for motor dry run protection .
I actually bought all the mentioned components but i can't get it to work . Obviously am a bit new to adruino .
It would have been very helpful if you
could make the same 😊
sad, unavailable
Useful information well presented. However the ESP32 comparison is a bit tendentious. The PicoW has four cores total, two M0 in the 2040 and the M3 and M4 in the CYW43439 as well as the unspecified amount of SRAM and ROM in the Wifi chip. Sure these are not available to run user code, but looked at that way, some of the resources of the ESP32 are used by the radio stacks and are so also not available to run user code. A power consumption comparison would be illuminating however and I suspect ESP32 has the edge there.
Thanks for the video! So given your comment that the board only seems to operate in station mode do you think that means WifiManager won't work? Haven't been able to get one yet so can't try it.
So nice , thank you for the great video
Good video.
Any chance to see NavSpark products mentioned? They seem to be good choice when one needs high acurracy GPS position for arduino, they have arduino nano like dev boards too.
Unfortunetlly not many resources on those.
Thanks for another great tutorial! As with any insignificant pronunciation slippo, there's always some smartass to point it out. As I am working for that company, lemme do the honors this time: For "Infineon" (the producer of the Wifi chip on the Pico W) cut the "ity" from "Infinity" and add a "neon" - or listen to it named here: th-cam.com/video/rpV7hKh_JVc/w-d-xo.html
And please take pride in the quality and thoroughness of your videos if folks have to go to such great length to find something to criticize ...
Nice tutorial!
One more advantage of the RP Pico is that it has PIO with DMA which is a great feature:)
Using the native Pico SDK would be even faster than Code generated by Arduino IDE :).
I still prefer ESP32 family tho :d
- The RP2040 can work at 240MHz!
- PICO exposes 27 GPIO... ESP32 has ONLY 25 usable GPIO since it uses 7 IOS for Flash Memory!
- PICO has PIO! This is a big plus! For kids and curious people who don't really know how to program and just cut and paste pieces of "arduino" code, they don't even know what PIOs are...
- PICO does not need a programmer! It has mass storage emulation, just copy the .elf file and that's it! And if we are programming in Python, we can run the program instantly from the editor/IDE without having to blink.
Great video. Good motivations for why you may want to use C and/or Arduino IDE:
- familiarity
- speed
- mature 3rd party drivers and samples for legacy peripherals
And I would add:
- because I simply don't want to use Python in any environment ever (my reason? I don't need one)
Have you ever made a project with raspberry pico, stepper motor, and a4988 driver sir?
If you have, I’ll be greatfull to watch it 😊🙏🏻 thank you, GOD Bless you and all of your family 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Very good video and information. 👍
Here in the UK the Pico W sells for £9 including shipping and the ESP32 , £4.35 shipping included - from China.
BTW I had "error: tls: bad record MAC" during plugin installation.
I just closed the Arduino IDE then reopened it and made BOARD MANAGER -> INSTALL again,
after the second attemps it was successful.
In terms of content, I am looking for a way to store the access data for the WLAN securely, i.e. not in a separate file as plain text. As the RP2040 does not have a CryptoChip, the integration of an external chip such as the ATECC608A would be a possibility. But to be honest, that's a bit too much for me without help...
It’s like the Pico W design folks looked at the ESP-32 and asked themselves, _”How can we make a board that does _*_HALF_*_ as much?”_
I finally got my hands on 1 of each. Pico, Pico-W. My PC does not recognize them when plugged into USB. So, I can’t I can’t do Arduino.IDE. Looking at my Raspberry Pi 3b……. HMmmmmm?
Greatings from France. I was interested by pico, specially for Wifi capabilities. I have programs for Arduino nano in C langage but now I can simply translate them for pico if I want to add Wifi capabilities. Thanks. I have subscribed to your channel.
in your comparison between the pico w and ESP32 you might mention that the ESP32 allows for access point
Thanks for your amazing contents, I always thought building and programming a robot is an impossible task. ❤
Hi Bill! thank you for your video. I am wondering if it is possible to reverse this communication, which means that when we press a physical button on the pico w, something is triggered in the website
Excellent video! Thank you!
Interpretive languages like Basic and Python are good for prototyping but final code should be C
at last! thank you!
Can we use arduino librairy into the Pico, ex: timer1, keypad, i2clcd
EXCELLENT VIDEO. THANK YOU!
Could it be that Bill has written a Dad joke algorithm?
Another excellent video, as always. Thanks Bill.
thank you very much for your excellent work. your videos are really very educational and allow those who are beginners as well as others to follow you well. thank you !
Hi
I cant find my com port is there something I Maby missed?
Great video.
will you be doing a video on the sparkfun RTK GPS modules and how to use them with arduino? it was mentioned in your GPS video that you would do a seperate video on that technology.
Where do you find there for this mythical $6?
Great video! Now that the Pico W has Bluetooth/BLE capabilities, could you make a video on using them?
Hi
I am very novice at this sort of thing, I do not know how you made the GUI for clicking the LED on & off, nor the GUI with the slider for changing the servo position
Thank you Kelly
Thank you, I want to build commercial iot device with pico w. How could I let the none tech users configure pico (ideally via a mobile app) to connect to their own home Wi-Fi hotspot without changing and recompiling the software source codes?
I got my first Pico after they released the SDK - in March of 2022. I didn't even look at Micro/CircuitPython :). I've recently been doing a lot of AI work with TensorFlow, so I'm more comfortable in Python. I recently gave CircuitPython a try and it wasn't half bad for non-time critical tasks. I'm still way more comfortable with C++ (20+ years experience vs about 2 years experience in Python).
If the WiFi connection is broken does it reconnect?
Great Job!
Thanks for this video! I thought my Pico W might have been broken when I couldn't get blink working. I was unaware of the different pin for the onboard LED.
Good work but still have room for improvement as with jQuery the JavaScript could be tidy up much better.
Hi Bill, You say at 1.32 the other videos on the tubes did not leave you much to cover? This being said, your videos are so much more informative and explain in such detail, it leaves very little that needs to be answered. The 1st video I ever watched of yours was (in my mind) too boring... but, once I got through it, I was in awe and realized WHY there was so much information and even went back to start it again. You're one, if not in my mind, of the best tutors on the tube's Bill. I hope that we see more videos on the Pi Pico W
thank you very much for the video. I got my pico blinking in 20 mins following the clear instruction. I still decide to go back to python, for it's real time REPL, which is much more user friendly for someone like me who knows very little about coding. I can actually type and run code like in terminals.
I can understand c++ code may run faster and less resourceful than python. Until one day I may code a project really cooks the pico W with python, then I will be able to come back here and try to get used to the code-compile-upload-execute cycle.
Great video!
Thanks! Well documented video!
Do you know why when I ping both my ESP32 and Pi Pico w they reply at over 200 ping?
Thanks for the tutorial! I am new to the pico (and Raspberry PI), but having extensive experience with Arduino microcontrollers this makes it easier for me to wrap my head around it. :)
Could anybody recommend a few good shops in Canada if any to buy generic parts, boards, and such. Hoping to possible find a good all in one shop for less shipping costs. Thanks.
Bill,
Thanks for a great video. With my pico w and arduino IDE 1.18.13, I have to reset the pico each time I upload. Any thoughts what I've got set wrong?
A very good video, thanks! What is the best solution to power the Pico W from a battery? 18650 or AA batteries? How many volts should the battery have to last the longest? I will use a temperature sensor that draws very little current.
Can Arduino will help me for keeping rectifier output records in terms of online or offline means Electric Signals can be stored and display by using Arduino so we can monitor DC current and Voltage.
I cannot send a message in the forums yet, So, Bill, Please, What program do you use to show your wiring diagrams? It is clean and I need to design some wire management. Thanks. Great videos
can you use Arduino IDE on a Pi Pico and still use micropython? or do you have to use arduino programming language?
more specifically - can you use arduino create web editor
Hey Bill ,absolutely love your videos. They are great for hobbyists like me, just dipping their toes in the water. Can you please make a video on using micropython with the ESP32 as the ESP32 does support micropython so it might be interesting to see it being used with micropython
Thank you for understanding the concept in-depth.
Hi Bill, thanks for your video. Your videos are great. But something remains unclear to me. when I upload the program into pico, the microcontroller's USB is disabled and the serial monitor does not work. Please explain how you did to open the serial monitor?
Bill, is there a reason you haven't upgraded to *1.8.19 ?*
I noticed at 27:40 that the *time* when *pinging* is all over the place!
Excelent video - as ussual perfect job. Thank you very much
Arduino is codex in C not C++
Yay. Excited for this video. Love the Pico W. Thanks, Bill!
A little disappointing that they are not enabling the Bluetooth when it is already on the chip. Still, an interesting board none the less. Maybe it was easier to get certification with the bluetooth disabled....
It would be nice if they could move to WiFi 5 on some of these boards. More for power svings than speed, but I guess there is a cost to look at too.
Your channel is my best discovery of 2022. Great work
Thank you for this video.. I wanted to test the Raspberry Pi Pico and I did not want to set up another IDE to do it. This was great. Thanks again
Hey, I am watching your videos for a while now. I was wondering if you could do a series of lessons for microPython.
very nice work as usual keep the good work up .. i do need to know something if it possible how i can connect esp32 to my running web site ? i have website published and working and i do need to send some data from esp32 there but i could not setup client in the website to receive data from esp32 or send to it i tried to use mqtt but the problem is most of is the mqtt require ssl and i do not know to set that up
no, strings are stored as strings during compilation, it is up to programmer to obfuscate strings if needed... you don't even have the basic understanding of it... YT, why?!
Thank you for the great video. I love writing code in Arduino, so this is right up my alley
Most ESP boards I've used (D1 Mini and NodeMCU) only have 6 completely free and usable GPIO pins, with several others being usable with restrictions like being high or low at boot or being serial RX/TX pins also. This is far too few for many projects and I've found myself using an Arduino and sending wifi commands over serial to the ESP board so I can take advantage of more IO pins. I ordered the Pico W as it appears it has more free pins, more like an arduino with wifi.
Is anyone going to talk about the flawless Photoshopped "Pi Cow" at 0:21?
Finished the video, apparently he didn't do it .
If you have issues with uploading do this:
tools > port > then select one of the ports
Thank you for you great info, on how to run the Picow in the Arduino IDE
Really enjoyed this. Look forward to seeing you use the Pico W in more videos.
Shame they didn't fit an antenna socket on the board, that would have been good
Thank you for your concise information and teaching.
Hi do you have a video on how to decode and us an rf remote with arduino. Thanks
I love your long form videos. thank you so much
As usual, excellent content!
As concerned to windows versions, they share same folder (Arduino15) so packs become available in both versions. Apparently, linux versions work in same way.
how about a motion car alarm using P2P Lora?
Another great video. Keep up the good work 👍
One problem with the ESP32 is the quality and consistency of boards varies all over the map, and the documentation is not the best. The Pi Pico has great documentation and the hardware is consistent.
I would think the boards made by espressif would all be high quality.
You make life on a starter on the Pi pico W really easy. Thanks again!
Wish I had him as my electronics teacher at uni.
Terrible pings.
Can you make a video on how to use ATtiny