What Every Honda EU2000i Owner Needs
ฝัง
- เผยแพร่เมื่อ 25 เม.ย. 2019
- Get the Kit here amzn.to/2U9od9K
Canadians can get the kit here amzn.to/35avVXc
Material:The three products are made from CNC Billet Aluminum,anodized red coated,effective anti-corrosion.
Fits:Honda Generator EU2000i,EU20i,EU1000i,EU10i.
Package includes: One Extended Run Gas Cap，one Mess Free Billet Aluminum Oil Change Funnel and one Magnetic Oil Change Dip Stick.
Characteristics:The crisp knurling design of the product surface, can be effective anti-skid, and make the installation or removal more convenient and safe.
Function:Screw this funnel into your generator, and make it easy and safe mess free oil changes.Magnetic DipStick's tip comes equipped with an strong Neodymium N50 Rare Earth magnet which attracts and holds onto any ferromagnetic metal shavings during engine operation.This Custom Gas Cap Adapter allows the user to hook up an auxiliary gas tank so that it can be used to feed the primary generator gas tank for extended operation time. - ยานยนต์และพาหนะ
![[EP.01] ดูฟรึตอนแรก LOL: Last One Laughing Thailand Thailand หัวเราะทีหลังปังกว่า | Prime Thailand](http://i.ytimg.com/vi/t4KunBRKn3s/mqdefault.jpg)
If your over full , you are likely causing extra crankcase pressure. Better a shade low then over full.
Also, an overfilled crankcase doesn't lubricate as well because the oil's ability to splash around is more restricted. He's got at least 6 ounces too much oil in that thing which is bad. I once overfilled mine by accident by 4 ounces and the oil didn't run out as quickly. I'm guessing the engine damage he has is because of an overfilled crankcase all the time.
That's a great addition to an awesome unit. Well done. Thanks for the info!
That crankcase is overfilled by a lot. Don't do it. An overfilled engine is far worse than one that doesn't have quite enough. Oil needs to splash around to land in the places that need lubricating. An overfilled engine will not splash properly.
Enjoyed the humor.🎄
great vid! very informative!
I have and have had the 3000is for a couple of decades. It requires the oil level be right at the bottom of the fill location. So, when filling you kinda have to see that area to know when it's full. If that red tube were clear/glass I'd say what a great idea.
I find placing a rag below the fill area takes care of any minor spillage...
Honda generators are the BEST!!
You 3D printed a funnel? Well, the good news is we found the dipstick.
Excellent quality and works great as an alternate power source for my Winnebago RV when shore power is not available. Also great for Florida storm season and our fluctuating power. On propane, this starts up easily and no messy gas to deal with, very clean and easy to operate. Build quality is better than expected should last for years.
Watch the video showing the damage caused when the magnet falls out of that cheap Chinese dipstick. They're pressed in, when the aluminum heats up it expands, losing the magnet that destroys the plastic oil slinger in the crankcase. Nice $450 fix.
A Snapple 16oz bottle fits over the oil extension tube giving a no-spill way to completely drain oil. Screw cap back on and you can't knock it over either.
Honda engineers probably didn't want to design something with extra parts that could be lost, or misplaced. Tipping it seems extremely easy to me..
Don’t overfill the generator with oil. Never do that.
@Miles Bruno I’ve been watching a lot of movies on TH-cam. It’s better than Netflix.
Great video I'm thinking of getting a new one of those that has Bluetooth.
I like magnetic drain plugs unfortunately I saw TH-cam video where a guy had one in a Honda generator like this and that magnet came off and jammed inside crank case anyways hopefully that's a better quality one 👌👍👀
Use a small Form-a-funnel to drain. Hook it under the spout, tip it and dump. Never spill a drop, no mess.
Good stuff
Thanks
5/8 fuel hose works great
Very cool stuff, I found I could make my own oil drain tube with about a 3 inches of 1/2" copper or other pipe with masking tape wrapped around the pipe to bring it up to the right diameter, you will need to play with the amount of tape to get the right thickness. Once done you can screw the 3 inch tube in to drain the oil. works well in a pinch!
That generator looks like it went through re-entry from outerspace about 250 times. Still working though... GO HONDA!
Yes extended run cap works great . 5 gallon tank good for two days running. 👍
What did you use on the fuel can side ?
@@TestDontguess yes I have 2 five gallon can on standby . You have to fill the genset tank first or it will not siphon from the external tank and the fuel hose should reach the bottom of the tank . I can get a week out of two 5 gallon tanks . 👍
@@TestDontguess For the fuel side on my 5 gal tank I use a spare gas cap and drilled a hole thru the center yellow cap I glued in and ran fuel hose thru the tight fit and just move all of it to the next fuel can. I used just regular 5/16 rubber fuel hose.
If you want this gas cap for free I'll give it to you. it didn't work for me. Not a good grip on the threads of the end of the gas tank. It will pop loose and stop siphoning gas from your secondary tank. Also the gasket that they give you with the cap will not hold up to gasoline. Absorbance cash expands and then tears extremely easy. Screw on extension and magnetic dipstick I like a lot
mark rottjakob I have a similar cap that would do the same thing. The rubber gasket inside the cap was to thick and prevented the cap from tightening. I removed the gasket, the cap tightens and I get a good seal that I can siphon from the external tank.
I have the kit for my 2200i i love it
Shes choochin! Nicely worn. 👍👍
Keeps the bugs away 🍻🍻🍻😂
@@TestDontguess 🍺
These generators would be incredible if they had a two gallon tank and a better opening to poor the gas into. I don't think I ever filled it up without spilling gas.
That’s 100% truth spoken right there
Use a funnel
@@jredd801 You obviously don’t have one of these!
It goes from “it’s almost full“
directly to “F’n OVERFLOWING”
In about a microsecond!!!
A funnel is not the issue.
I use a modified fuel cap and a boat gas tank.
All you need is a good gas can and a funnel. I never had any spilling problems. The generator runs 9 hours of less than a gallon of gas. How much trouble is it to let it cool down for 20 minutes to refuel it? It's good for the unit to rest after running 9 hours.
Good ideas for that mosquito sprayer. 🤣🤣🍻
You were hoping for more likes than this for your comment huh ?
Hmmm, When I change oil I just tip the machine and the oil pours out. Then I tip it a little the other way and pour oil in it. It’s always worked well for me that way. I do agree, I wish it had a little bigger tank. I get about 8 hours on mine running a heater.
Same.. Oil changes easier than most other engines!
Which thread does the oil dipstick or "pipe" have at 1:35?
You need to hook up with Xzibit and start up Pimp by Genny. Put some NOS and an under body LED kit on that bad boy.
Bro, it's a Honda. It needs A WING.
@@hxhdfjifzirstc894 front fender kit and those bullet hole stickers.
X-rated for sure. I'm surprised TH-cam lets this slip by. Thanks man. That was helpful.
Nipples etc. Cool little kit tho.
Honda 2100I companion Can someone help me i removed the tether that holds the gas cap on to generator in the process all the components fell out of gas cap and i cant figure the correct configuration of putting it back together so the off on switch works correctly on the cap..Any suggestions?
Soon as I heard the panties comment you got a thumbs up!
Will this work on my cat very quiet generators?
Can someone please help me?
What are the dimensions of the oil screw and the thread of the tank on your Hondas?
None of the suppliers specify the dimensions of the threads of the oil screw and especially the tank cap.
I have a Zipper ZI-STE2000IV, this is supposed to be a clone of the Honda EU2000i.
And I want to know if this set also fits on my generator.
The thread of the oil screw has an outside diameter of 17.24mm, 0.68",
the thread of the tank has an outside diameter of 45.9mm, 1.81".
the gas cap is 43.3 mm, 1.705" inside.
On the new EU2200i, the thread of the oil screw has been significantly enlarged. So be careful which set you buy.
You crack me up!😂
Looks like its time for a rebuild,Jerry...
Cylinder compression and leak down tests are spot on, which why I’m leaning towards valve seals. Oil burn clears up after a few minutes of running
What size thread on rhis adapter
Unfortunately, the links to where to buy the parts doesn't work. :-(
Amazon
Nothing wrong with the size of the gas tank. It will run for 9 hours on less than a gallon of gas. It's best to let it cool down for 20 to 30 minutes then refuse it. Your generator will last longer if you take care of it.
Would the honda eu2200i runs a bosch jackhammer (1700w) just fine? I am thinking to get one for my out door project.
1700W is less than 2200w so what do you think?
My dads eu1000i smoked like that ran good but someome stole it from me .
Makes me wonder, how good the magnet is mounted on the dipstick. If this is not done right/falls out, then it will be a big mess, I assume?
Pressed into Chinese aluminum that expands when it heats and falls out, gutting engine.
@@eegg6954 Am afraid so. An assumption on you part, or experience?
@@yxcvmk Happened to me on a 2000i
@@eegg6954 What a mess. Thanks for the feedback!
@@eegg6954 sorry for your loss.
I'm trying to decide between one of these 2000 Watts for around $400 to $500 or buy a brand-new 2200 for about $1,000. I want to buy two and link them for an RV. So spending $2,000 plus tax sounds like a lot of money compared to $800. Many of the used ones don't have that much use and I'm just wondering how reliable they will be when already used. I know that they are typically very reliable
Your better off to spend the money and get the larger unit instead of linking 2 together
@@TestDontguess Why would you recommend the larger one? My issues are that its big, its bulky its REALLY heavy and hard to move. . The smaller ones are lighter weight. I can take one generator when I only need one. The big one costs $2000 for 3000 watts. The smaller ones cost $2000 for 4400 watts. More power for the same money. Way more versatile and easier to move around.
My 2200 will run a 13,500 btu RV air conditioner by itself. It surges when the compressor kicks on in stock form, but after installing a micro air easy start it is much easier on it. Extra cost of the easy start is worth it to me to power it with one small gen. Just my 2 pennies.
My friend the reason why it smokes is you didn't change the oil at the right intervals. And look at the oil that you're draining out now that's way past when you should've changed it.
Rebuild that thing already.
Where do you get these accessories?
Link is in the description
Would you say these are quiet generators?
YES! Nothing less quiet than the Honda eu2200i.
No not really at least this one wasn’t
That kit don’t fit the new Bluetooth model, the gas cap fits but the new model has a bigger oil fill hole approx 1 1/8”....the filler and dipstick just fall into filler hole
Isn’t the new models the 2200i
I just slice a water bottle and jam it in. Throw away after clean up
I just use a 6" piece of one inch pvc pipe, but then again, am a little parsimonious.
is that Honda Gen good for 12-13 amps? Worst case I'd need 20A for my mig welder... recommend?
No 20amp that I am aware of as it’s only 2000watts
If I read the MIG welder 115 VAC specs, its 2.50 to 1.77 KW....
@@dg98adams looks like you know the answer then
How much does it cost to run this generator for 8 hours a day 24/7?
Your amazon link don’t work
thanks for pointing that out, links have been fixed
Yes. 2 design flaws. No oil drain plug and no fuel flowshutoff.
The on/off switch is a fuel flow shut off
I have a powerhouse ph2100pri generator and it's the same fucking stupid design but mine doesn't have the dish under the spout so it's kinda dumb.
Yea great units...till the belt breaks or you see it...You'll need a mortgage to pay the repair bill
I’ve rebuilt this unit myself there isn’t anything very expensive to it
My god that poor thing
all night long.
LOL! @ 2:57 .....THAT, or lame! ESPECIALLY,...with THAT accessory! That's a deal-SEALER...or...you're...LAME...in the Bush!
Funny shit 😂
I’m gay, but I still like that accessory!
Does not look like you have taken very good care of it. I'm not sure I would trust your advice......
Maybe because somebody actually uses their generator with 1000’s and 1000’s of hours and not like someobody as yourself which most likely it just sits on a shelf
@@TestDontguess I polish my generator once a month and give it a foam bath. Looks like it's brand new out of the box with 1800 hours on it......
Come talk to me when you have over 7k hours and have used it in a industrial environment
I think it’s time to retire that unit brother.
A piece of cardboard does the same thing
Lol
Thanks, buy some bitcoin retire early 😉
I can't believe you said that. How culturally insensitive of you !!!! ...lol