What a lovely job and I bet the customer and you are both satisfied. People when working are in a rush to do everything quickly and on their mobile phones. Some have lost the ability to enjoy doing a good job. You have not and do an excellent job. I bet your in demand. My builder is eighty and brilliant and thinks well in advance and loves to work. He always always spot on. I have learnt so much from him as a DIY man him. Learnt a lot from your video. WELL DONE
Hello andrew certainly believe if someone is paying me I always do the very best I can, I do love my job and meeting and working somewhere different every day makes it all worth while, good to hear your builder doing great work for you. 👍regards Ricky
The rust stains left from cutting the RSJ can be tricky to remove. However, the blocks can easily be lifted and swapped with clean blocks towards the back of the drive or from an area out the way. This can make a huge easy improvement to the first appearance of a drive. All the best with your work. James - Pristine Paving, East Sussex.
Well TH-cam recommended this vid and I'm not disappointed. Satisfaction right here! And my kinda job. Great work, good to see somebody paying such attention to detail in their trade! Nice setup in that VW.
Hey thanks very much, good to hear that TH-cam is recommending my videos, Thanks for viewing, come a viewing come watch some of my other work videos on my channel, Cheers, Regards, Ricky
Great job I do mine once a year and resand and seal it with a water based sealer makes the world of difference. 120 sq ft takes about 50 ltrs of sealer
Perfection. You work so hard, you don’t cut corners, we see everything, you should be higher in your subscribers i think. Well done you. Cheryl from wales. X
Good to see someone re sand the drive after there’s a lot of cowboys round my way that have ruined a lot of nice driveways by not knowing what there doing. Love the videos 🤘🏼
Thanks Flam, yeah customer was very happy with the work, The neighbour did come out but not to see the work but have a moan asking about what the large pole was, and how long it would be there 😄
Those marks at the ends are a total nightmare to remove.. I usually just flip the blocks over with most stains these days to just avoid the hassle. Great vid bud
Strangely very satisfying to watch. Would you recommend putting a sealent on top of the block driveway? I ask because, I got a new block driveway done over a year ago and want to keep that new look!
Top video mate, not sure why this came up as recommended.. I don't even have a driveway and don't live down in Bournemouth but this was quality regardless 😂 Got a sub from me, keep up the good work fella 👍
Hey it’s good to hear TH-cam is recommending my content, great to have you onboard as a subscriber, cheers come check out some of my other work videos 👍regards Ricky 👍
TH-cam just randomly recommended me this video...I watched it and thoroughly enjoyed it....and just subscribed. Great work guys! - Nice content, soothing and entertaining too. Not seen this kind of channel on TH-cam. #KeepItUp
Nice job awesome setup in the van,I like the snow foam cannon idea for the hypo, before resanding I’ve wiggled a couple of stained blocks out and turned them upside down before now then resand 😉
Hello mark, thanks for the comment, yeah them snow foam bottles are ideal for making chem stick to the wall, mines broken for some reason, reminds me i must buy an new one on ebay cheers👍
I had angle grinder marks on my brick block... got it off with strong brick acid. I used a garden sprayer and just washed the stain until it melted away 🤘😉
Maybe its explained in other videos of yours but it would be great to hear your reasoning for choosing the hardware configurations you use for a particular job. Why use steam/high temperature for some jobs and not others? Why use 40° nozzles on this job? What does 035s refer to?
Hi Ricky, I think that "burn mark" is probably iron oxide (aka rust). The likelihood of angle grinder sparks achieving temperatures required to burn brick is slim. It will however spray iron filings into the surface. As such you should try Iron-X, bilt hamber autowheel or similar to dissolve the iron particles before jet washing. Hope this helps.
Hello Jaun thanks for your commnet and info i can see your point after looking into this issue more now i was also told that wet blasting with kiln dried sand would take it off without defacing the top of the brick, Juan ll ceratinly try this if the guy needs it done but he was on about having some spare bricks and will replace them. Thanks for viewing and subscribe :)
Great to see someone who takes pride in doing a job. It's all about attention to detail. TH-cam, must be reviewing my emails / web searches, as my K7 arrives today. What chemical(s) would you recommend for putting through the K7 for cleaning the Marley concrete roof tiles as well as for the monoblock wash. Cheers. Subscribed...
Hello Stephen, thanks very much. Its not really advised to put chemicals through your pump on your pressure washer as some can be quite harsh and will erode your seals , we use a seprate chemical pump. The chemicals that karcher supply are not very good, ideally for best results use soduim hypo, but dont put through pressure washer, Happy cleaning Steve 👍
@@Bournemouthjetwashing Thanks for that, I ordered a separate hand pressure sprayer, and one of those lance sprayers. Will get the sodium hypo, should that be applied straight out the container, or do you water it down, based on the degree of staining?
Stupid question (I'm good at those) - re: the burned bricks. Are the bricks cemented in place, or just sitting loose (with sand)? Could they just pop up the bricks and flip them over?
Am I the only person that finds watching this video very therapeutic......fantastic job....pity you dont have an international office here in Ireland as I would most definitely be hiring your services for my cobble lock, thanks for the video.
Ricky, do you ever suggest to use a driveway sealant afterwards? I saw a big tub of Everbuild Path & Driveway Sealant and it shows block paving? Does it work? Is it worth it? Keep up the good work!
I get asked this so many times, it really is very simple i use a parasole base and have a carbon fiber window cleaning poles on one goes up to 20ft the other goes up to 45 ft then i attach a go pro camera to the top and control the camera through the go pro app on my phone. Although when its windy i prob shoot at around 15ft i need better more ridged poles manybe fibre glass ? AZZA no drone mate the batteries wouldnt last
Hello mate, I'm preying for an answer , Live the channel 😀, Quick question as I have my first job and I'm nervous as the ratio is confusing me. I want to use the Canon like you have and use Hypo and surfactant, do you put those 2 in canon neat and the pump waters it down? If I made up say 5 litres what ratio would you go with? Thanks and keep up the good work , Your channel is great for confidence building
@@Bournemouthjetwashing Your an absolute Gem 💎 Thanks mate , And you've got great audience communication which will do you great on TH-cam #algorithm 😁 Thank you
I recommend pretreatment of the area your about to wash with chemicals 1st then wash it. Also you let residual sediment dry into the pavers while you surface cleaned the driveway in its entirety. Pause and rinse as you work 2 sections. Leaves a brighter surface! Treat a 2 and and let set into pavers. 12 hours later you can dry sand or wet sand immediately but never leave pavers without sand.... You could have tripled your invoice by adding in wet sand and finishing with sealing brother! Get that money all the way around buddy
I moved from England to America and have been bach many times sometimes every year, but these long driveways are amazing!!! Really wasted space unless you are going to park 12 vehicles!
Well to be fair everything is smaller in the uk, lived in America too for a few years till I got deported, but i do like how they do things on a large scale
Cracking job only 1 flaw just because you cannot get that burn off don't mean its not movable sand blasting would😉. I've just started doing pov blasting videos and I'm in ore with your editing skills and that tripod thats mega 👌
@@Bournemouthjetwashing Is it ok to add your channel as featured on mine? Feel free to use mine if you feel my videos will add value to your channel I show pov of sandblasting really enjoying the platform just need folk to see it now 😂
Hello Casa , Yes indeed some contractors offer sealing, its not a service i offer as i dont think its worth the extra money as it never lasts , the best way is to leave it unsealed and a be pro active and add a herbicide every couple of months to keep the driveway looking great and then re cleaned every couple of years
Hi adam , not really sure its just pressure washing, just take your time with it to do a good job and certainly having the right tools for the helps. Be honest with your customers on how well you can clean up there driveway, patio , But most of all be happy in your job👍😄
Re-sanded the next day! Lucky you could do it the same month in U.K. 👍🏻 would have liked to see you take an angle grinder to that burn mark though and took the top off it, nice bonus for the customer 😉 Had any experience cleaning a resin driveway yet? Looking to get rid of our block drive and replace with resin but it needs to able to stand up to regular washing!? 👍🏻
hello there, resanding never really a problem its the sealing , not that i offer that serivce, Left it to the customer to sort them bricks out as he said he maybe had some spare, As for the resin driveways they look great here is a video of me doing some resin in this video its the back patio area but the guy did have this resin going all the way around the house and a drive. have to go gentle with the cleaning process of resin not high pressure washing, Check out my video see what you think here. th-cam.com/video/X-CunusIgIo/w-d-xo.html
Bournemouth Jet Washing thanks, good video too! I used to do mobile valeting many years ago so have always had a decent jetwash at home to do the driveway and back garden as the whole lot is blocked, got a few barrels of sealant too, I’ve stopped using it as it makes the drives too slippery, someone said about sprinkling sand into the sealant before it’s dries to add some grip so might give it a try. Not many jobs where in such a short amount of time you can make such a dramatic impact. Cheers 👍🏻
🔥🔥 Come check out lots of my other driveway cleaning videos here. th-cam.com/play/PL-12REo_-nsW7_Ci1kMEQsnzf98qEvYWm.html
Why Do You Make A Channel About Jet Washing?
Bonjour
C est combien le prix au m2
Merci
There's something very relaxing about watching all that dirt wash away.
Gosh I was thinking that …..
This is quite easily THE BEST driveway and patio pressure washing channel on TH-cam and the 2nd best pressure washing channel on TH-cam. 👍😜😘
Cheers mate, your commercial im residential we are both killing it in our sectors, on wards and upwards, Wash on 👍
What a lovely job and I bet the customer and you are both satisfied. People when working are in a rush to do everything quickly and on their mobile phones. Some have lost the ability to enjoy doing a good job. You have not and do an excellent job. I bet your in demand. My builder is eighty and brilliant and thinks well in advance and loves to work. He always always spot on. I have learnt so much from him as a DIY man him. Learnt a lot from your video. WELL DONE
Hello andrew certainly believe if someone is paying me I always do the very best I can, I do love my job and meeting and working somewhere different every day makes it all worth while, good to hear your builder doing great work for you. 👍regards Ricky
Finally a customer who understands a clean drive/ patio with a dirty wall/ house bricks
Just looks like a dirty wall.
Love your pride in your work and guitar solos
Really liking the longer, more in-depth video format!! Always a pleasure watching your videos, Ricky, regardless of duration! Cheers, my friend!
Great stuff, cheers foad, i hope to make the videos better with editing etc 👍
The rust stains left from cutting the RSJ can be tricky to remove. However, the blocks can easily be lifted and swapped with clean blocks towards the back of the drive or from an area out the way. This can make a huge easy improvement to the first appearance of a drive. All the best with your work. James - Pristine Paving, East Sussex.
These videos are brilliant in lockdown! Even better than the bloke in America who clears floods caused by blocked road gullies....
Much better having a longer video, thank you and keep rocking 🎸🤘
Well TH-cam recommended this vid and I'm not disappointed. Satisfaction right here! And my kinda job. Great work, good to see somebody paying such attention to detail in their trade! Nice setup in that VW.
Hey thanks very much, good to hear that TH-cam is recommending my videos, Thanks for viewing, come a viewing come watch some of my other work videos on my channel, Cheers, Regards, Ricky
Great job I do mine once a year and resand and seal it with a water based sealer makes the world of difference.
120 sq ft takes about 50 ltrs of sealer
New subscriber from Birmingham (the one in Alabama) :). Love your channel because you take pride in your work. Not enough people do that today.
always not skipping ads🤗 so satisfying 😃
Glad you like them, cheers for not skipping and watching JDO :)
What ever you charged, worth every penny that.
Looks just like new.
This video left me so satisfied, almost in a full body massage kinda way. I’m so glad fb recommended this you tube channel. Keep up the good work!
Hello Michelle glad to hear you come across my videos , Please come check out some more of my work, Cheers, Ricky
How much would you charge to do a Job of that size Ricky ?
@@robertwilson7169 sorry rob cant comment on the cost online
How would I get to find out ?
Very excited when I got notified you posted. Very satisfying.
Exellent, Havent posted for a week as got struck down with man flu, but back on it now , thanks for the contuined watching christine :)
I really enjoy watching your videos. And you do an amazing job keep up the good work
Perfection. You work so hard, you don’t cut corners, we see everything, you should be higher in your subscribers i think. Well done you. Cheryl from wales. X
Thanks so much 😊 Cheryl would sure be nice to get more subs, regards Ricky
Good to see someone re sand the drive after there’s a lot of cowboys round my way that have ruined a lot of nice driveways by not knowing what there doing. Love the videos 🤘🏼
Thanks for watching and your comment Ryan, reagrds Ricky
What an improvement! Hope the neighbour saw and gets you to do his drive!
Thanks Flam, yeah customer was very happy with the work, The neighbour did come out but not to see the work but have a moan asking about what the large pole was, and how long it would be there 😄
Bournemouth Jet Washing Typical jealous neighbours lol
Superb job mate. As good as new. Great video
Those marks at the ends are a total nightmare to remove.. I usually just flip the blocks over with most stains these days to just avoid the hassle. Great vid bud
Strangely very satisfying to watch. Would you recommend putting a sealent on top of the block driveway? I ask because, I got a new block driveway done over a year ago and want to keep that new look!
Hi ya marky , certainly would not recommend any sealer as its dont really work that well , Your better off using a biocide to keep it looking its best
Top video mate, not sure why this came up as recommended.. I don't even have a driveway and don't live down in Bournemouth but this was quality regardless 😂 Got a sub from me, keep up the good work fella 👍
Hey it’s good to hear TH-cam is recommending my content, great to have you onboard as a subscriber, cheers come check out some of my other work videos 👍regards Ricky 👍
One SF joatnh
TH-cam just randomly recommended me this video...I watched it and thoroughly enjoyed it....and just subscribed. Great work guys! - Nice content, soothing and entertaining too. Not seen this kind of channel on TH-cam. #KeepItUp
Hey mark that for subscribing cheers for the comment, Regards Ricky👍
Only 30 seconds in and I think this one is going to be a very satisfying clean. Looks rough but potential for it to sparkle
Another proper job. well done mate 😃
Nice job awesome setup in the van,I like the snow foam cannon idea for the hypo, before resanding I’ve wiggled a couple of stained blocks out and turned them upside down before now then resand 😉
Hello mark, thanks for the comment, yeah them snow foam bottles are ideal for making chem stick to the wall, mines broken for some reason, reminds me i must buy an new one on ebay cheers👍
Adoro seus vídeos! Abraços diretamente do Brasil!!!!
Kind words thanks very much :)
Your videos are the best on youtube Top work keep um coming thanks
I had angle grinder marks on my brick block... got it off with strong brick acid. I used a garden sprayer and just washed the stain until it melted away 🤘😉
Yeah i heard that acid will sort it out, was just a bit worried it might stain the brick, Good to hear you sorted it :)
Mate, it I could give you two 'thumbs up' on TH-cam I would just for the air guitar solo at the end. Epic. 🤘. Love your work boss.
Hey Gabriel glad you like my content, here is another air guitar moment , Rock On ✌, th-cam.com/video/Jmujg_bWHxE/w-d-xo.html
Love your video editor😍 it makes your job look much cooler, 🤟
Hey thanks cool, the editor is me :) cheers
You did a brilliant job all round, it now looks amazing! Sue
Thanks very much sue, thanks for watching👍
This is great , I could watch this all day long 👍🏻
Maybe its explained in other videos of yours but it would be great to hear your reasoning for choosing the hardware configurations you use for a particular job. Why use steam/high temperature for some jobs and not others? Why use 40° nozzles on this job? What does 035s refer to?
Turned out very nice.
Great work Ricky
Thank you kindly
Hi Ricky,
I think that "burn mark" is probably iron oxide (aka rust). The likelihood of angle grinder sparks achieving temperatures required to burn brick is slim. It will however spray iron filings into the surface. As such you should try Iron-X, bilt hamber autowheel or similar to dissolve the iron particles before jet washing. Hope this helps.
Hello Jaun thanks for your commnet and info i can see your point after looking into this issue more now i was also told that wet blasting with kiln dried sand would take it off without defacing the top of the brick, Juan ll ceratinly try this if the guy needs it done but he was on about having some spare bricks and will replace them. Thanks for viewing and subscribe :)
Nice job..Where was the big foam hand wave today? Makes me smile 😁
What a brilliant video. My 1st watch of many of your videos. Love the music & new subscriber. Excellent job & finish.
Hey welcome aboard Englishman, Thanks very much for the comment glad you like my work 🇬🇧👍 Regards Ricky
What’s in the chemical agent , want to do my own drive and have no clue what to use lol . Great video
That truck is loaded ! holy nice set up !
Cheers yup I’m a fully mobile , quite a bit of weight in the motor now 👍😆
Great to see someone who takes pride in doing a job. It's all about attention to detail. TH-cam, must be reviewing my emails / web searches, as my K7 arrives today. What chemical(s) would you recommend for putting through the K7 for cleaning the Marley concrete roof tiles as well as for the monoblock wash. Cheers. Subscribed...
Hello Stephen, thanks very much. Its not really advised to put chemicals through your pump on your pressure washer as some can be quite harsh and will erode your seals , we use a seprate chemical pump. The chemicals that karcher supply are not very good, ideally for best results use soduim hypo, but dont put through pressure washer, Happy cleaning Steve 👍
@@Bournemouthjetwashing Thanks for that, I ordered a separate hand pressure sprayer, and one of those lance sprayers. Will get the sodium hypo, should that be applied straight out the container, or do you water it down, based on the degree of staining?
So satisfying watching ur videos
Cheers Don
Wonderful. One question, Why we put sand at last?
That bungalow is on a huge plot. The drive goes on forever.
Yeah i remember it was a big area
Stupid question (I'm good at those) - re: the burned bricks. Are the bricks cemented in place, or just sitting loose (with sand)? Could they just pop up the bricks and flip them over?
That wall came up nice, great job done 🇬🇧🇬🇧🇬🇧💜💜💜
Hello Jill , having a wall cleaned brings back that kerbside appeal :) Cheers
Cool!! It is a great pleasure to watch your videos!!!
Kind words graber, cheers 👍
@@Bournemouthjetwashing
Thank you!😊
OMG! Resanding! You are a professional, sir!👍😎
Hey Katherine, kind words thanks very much 😁👍
Bournemouth Jet Washing rather slow at the old brushing in though mate 😂
@@wilsybhoy
Excellent work mate , good to see good tradesman 👍👌💯
Cheers mr digler 😁
So satisfying!😍
👍Amazing video! Great job!!!
Nice work ... and very funny 👍 😁
Thank you so much 😀
Brilliant job well done again 👏
Thank you! Cheers!
Great video mate subscribed
Good and proper job, well done
Thanks Shaun
Your camera pigeon is very well trained 👍
Thank you so much , yeah i look after him well :)
I'd love a job like this, all day, everyday, no matter what the weather. It's the OCD in me.
Give it a go tommy its certainly is job satisfaction 👍
@@Bournemouthjetwashing
Bonjour
C est quoi le tarif au m2
Svp
Am I the only person that finds watching this video very therapeutic......fantastic job....pity you dont have an international office here in Ireland as I would most definitely be hiring your services for my cobble lock, thanks for the video.
Nice professional job how it should be done.
Great video some great shots
Cheers William 👍
Ricky, do you ever suggest to use a driveway sealant afterwards? I saw a big tub of Everbuild Path & Driveway Sealant and it shows block paving? Does it work? Is it worth it?
Keep up the good work!
Sealing is the devil, its awful stuff and is overpriced and never lasts, best too clean and biocide the driveway, thanks for watching👍
Bournemouth Jet Washing that makes sense I guess and explains why I’d not seen you doing it! That’s for getting back to me 😊
I like yours videos. I also do power wash, I started about a year ago..
Cheers ,hope all is going well for you too , thanks for watching👍
Any tips on how to keep it looking fresh? I pressure wash and sand every year, just want that new look to last until the following year!
Soft wash it with bleach 👍
Great video again.Quick Question the soap dispenser is it sh you use and will it give you the right mix
No i have to batch mix it on the job, every job is not the same mix
Looks like new. Excellent job.
Great job cocker, How long did it take from start to finish?
Cheers Arnie about 4 hours over 2 days
Wow amazing Ricky and just wondering how you get the high shots
drasticg Drone
I get asked this so many times, it really is very simple i use a parasole base and have a carbon fiber window cleaning poles on one goes up to 20ft the other goes up to 45 ft then i attach a go pro camera to the top and control the camera through the go pro app on my phone. Although when its windy i prob shoot at around 15ft i need better more ridged poles manybe fibre glass ? AZZA no drone mate the batteries wouldnt last
Hello mate, I'm preying for an answer , Live the channel 😀, Quick question as I have my first job and I'm nervous as the ratio is confusing me. I want to use the Canon like you have and use Hypo and surfactant, do you put those 2 in canon neat and the pump waters it down? If I made up say 5 litres what ratio would you go with? Thanks and keep up the good work , Your channel is great for confidence building
hello 5 litres wont last long, mix up ten , 1 litre hypo and a capfull of surfactant
@@Bournemouthjetwashing Your an absolute Gem 💎 Thanks mate , And you've got great audience communication which will do you great on TH-cam #algorithm 😁 Thank you
@@Bournemouthjetwashing Can I run that through a snow canon at that mix or will the output dilute it?
@@swiftygaming5300 you can and the mix will dilute , fill the snow foam bottle with neat hypo and see how you get on.
@@Bournemouthjetwashing Thank you again 🙏 Sorry for the questions
Great job Ricky. What camera set up are you using for the over head shots. It looks fantastic 👍
Great job!!!
Thanks very much 👍
5:25 the next door neighbour’s driving😂
Your profile pics looks awfully like GamingEthnics gamer pic from GamingEthnics Facebook page.
m.facebook.com/GamingEthnic
Haha yep I saw that too .i laughed
I recommend pretreatment of the area your about to wash with chemicals 1st then wash it. Also you let residual sediment dry into the pavers while you surface cleaned the driveway in its entirety. Pause and rinse as you work 2 sections. Leaves a brighter surface! Treat a 2 and and let set into pavers. 12 hours later you can dry sand or wet sand immediately but never leave pavers without sand.... You could have tripled your invoice by adding in wet sand and finishing with sealing brother! Get that money all the way around buddy
That tripod must be well high up!
Great tidy job!
I moved from England to America and have been bach many times sometimes every year, but these long driveways are amazing!!! Really wasted space unless you are going to park 12 vehicles!
Well to be fair everything is smaller in the uk, lived in America too for a few years till I got deported, but i do like how they do things on a large scale
Brilliant video can I ask what that ska music is when your resealing the drive with the sand cheers
Hello mark thanks very much, cant beat a bit of ska music eh 👍 its called spider juice and can be downloaded in the youtube creator studio for free
Great stuff Ricky
Cheers
Cracking job only 1 flaw just because you cannot get that burn off don't mean its not movable sand blasting would😉. I've just started doing pov blasting videos and I'm in ore with your editing skills and that tripod thats mega 👌
Hi ya mick i think it was replaced with a couple of spar bricks the guy had in the end, the tripod is a window cleaning pole with a go pro on :)
@@Bournemouthjetwashing Is it ok to add your channel as featured on mine? Feel free to use mine if you feel my videos will add value to your channel I show pov of sandblasting really enjoying the platform just need folk to see it now 😂
love, love ,,love this video..
That ending was awesome lol
hahaha cheers juan i thought id add something a bit different to see how it would go down lol
Great Video m8. We are looking to add power washing onto out list of cleaning services. 👍
Give it go paul now is the time as come september its goes quite in the residental side of work
Nice job
Hi Ricky what’s the best chemical/detergant to use on my tough algae and oily driveway and can you give a link please much appreciated
Wicked tutorial. Thanks so much.
Fantastic job!
Hello Stefany, thanks very much indeed :)
This is so satisfying to watch 👀😁 perfect job 👌
Hi dan, kind words thanks very much 👍
Nice job on the driveway
Cheers 👍
I'm curious. Some videos suggest applying sealer to the block paving. Do you not think it is needed?
Hello Casa , Yes indeed some contractors offer sealing, its not a service i offer as i dont think its worth the extra money as it never lasts , the best way is to leave it unsealed and a be pro active and add a herbicide every couple of months to keep the driveway looking great and then re cleaned every couple of years
Great job that mate.
Amazing ! Any tips and pointers for someone who’s looking to start out ?
Hi adam , not really sure its just pressure washing, just take your time with it to do a good job and certainly having the right tools for the helps. Be honest with your customers on how well you can clean up there driveway, patio , But most of all be happy in your job👍😄
Fantastic job done 👍👍
Thanks chris 👍
You r welcome what’s the stuff you spayed on the wall
@@chriscars3578 it s a soft wash mix of sodium hypo and a added surfactant
Bournemouth Jet Washing what’s the stuff you sprayed on the wall
Thanks that’s great will have to try and get some to do my wall and concrete drive
Did you have to clean calcite on that wall as well..
Re-sanded the next day! Lucky you could do it the same month in U.K. 👍🏻 would have liked to see you take an angle grinder to that burn mark though and took the top off it, nice bonus for the customer 😉
Had any experience cleaning a resin driveway yet? Looking to get rid of our block drive and replace with resin but it needs to able to stand up to regular washing!? 👍🏻
hello there, resanding never really a problem its the sealing , not that i offer that serivce, Left it to the customer to sort them bricks out as he said he maybe had some spare, As for the resin driveways they look great here is a video of me doing some resin in this video its the back patio area but the guy did have this resin going all the way around the house and a drive. have to go gentle with the cleaning process of resin not high pressure washing, Check out my video see what you think here. th-cam.com/video/X-CunusIgIo/w-d-xo.html
Bournemouth Jet Washing thanks, good video too! I used to do mobile valeting many years ago so have always had a decent jetwash at home to do the driveway and back garden as the whole lot is blocked, got a few barrels of sealant too, I’ve stopped using it as it makes the drives too slippery, someone said about sprinkling sand into the sealant before it’s dries to add some grip so might give it a try. Not many jobs where in such a short amount of time you can make such a dramatic impact. Cheers 👍🏻
Does the surface cleaner fit in the lance? Or how does that work exactly? Many thanks
What do you do with the dirt and crud that washes down to footpath/pavement? Thanks in advance for the great videos.
Hello Donal , Normally it get swept up into a builders bucket then mixed into the flower beds or taken away, cheers
This is really awesome 👍