this is an amazing guide to building this keyboard, I have done everything said in this video and my keyboard has turned out amazing and it was very easy!
If you put silicon dampening or moldable eraser rubber material in the bottom of the case instead of the foam you would even get a much deeper and better sounding keyboard! But good job on what you've done so far!
Man, that was clean thock on a budget! Btw, i have the same keyboard like yours but, the sound wws completely different. Did i just made a mistake while modding the keyboard?
Thanks for the vid. One question, do you think this keyboard can have interference issues with cherry keycaps? I've heard that it is a thing w north facing led/switches
would it be possible to add a daughter board inside the keyboard? I really want it because its cheap and already very nice because it has preclipped stabs, etc etc but I want a wired mode because i play a lot of rythm games :'l
if you look at the PCB it looks like the bluetooth transmitter is soldered on there. all you have for wires is the two from the battery compartment - so tldr, i highly doubt it's possible. i did a little searching on google and reddit and they seem to agree. which is really sad bc this is the exact same issue i have with it, it's perfect otherwise!
@@willtogs right, and they're way more expensive which is sad. the other thing that kind of dissuades me is the janky firmware/software situation with these
Just built the tester84 out myself but used some XDA profile caps to avoid interference! Do you find yourself experiencing any with the cherry’s in this build??? Would love to use some cherry on mine 😅
It will still have interference if you use thick keycaps like GMK for example. If you use other clone keycaps or perhaps Akko keycaps then interference is not an issue.
You should try and review the Tecsee brand switches sometime, I’m having trouble decided between the Ruby’s, diamond linears, and ice candies. I heard the ice candies were basically just aqua kings for half the price. Anyway it looks like they have great switches and most are factory lubed and come into about 50-60 cents a switch. Good quality low price
@@khoinguyen-cc3mo unless you're planning to use cherry profiled keycaps, I suggest buying Gateron Milky Yellow Pros, other than that, I'd say that's going to be a good build. Good luck!
Wait, are you using cherry profile on a north facing board? Does the KTT Kang whites help with interference? That's insane for the price if it does, cuz I have the same exact keyboard and I want a little poppier thock
@@renztrojillo I have noticed that the interference only show up clearly most when you use thick Cherry profile keycaps like GMK or any keycaps that has thickness of 1.5mm. Other than that, any clone keycaps that has the thickness around 1.2 - 1.3mm won't have much issue with interference -> combine that with the long stem of the Kang White and you don't have to worry much about Cherry profile interference. Alternatively, Akko's Cherry profile keycaps will suit well with Kang White too. As they don't thick as much as GMK and Akko does have a lot of North-facing prebuilt keyboards that use Cherry profile keycaps. Hoped this help you :D.
where u got that price now it cost too much one ktt kang white switch costs 3 cents and thers no board lesser than 50$ i mean reasonable quality ones whered u got that nice price i already have gateron pro blacks installed they sound pretty nice and smooth but i like ktt kang white switches sound they are more poppier i havent used them so should i spend more to get ktt kang whites or gateron pro blacks dosent have much of a difference if anyone used both let me know thanks in advance ktt kang whites are costing me arround 18-20$
@@bronzehawk3646 what were u trying to ask? I cannot understand what you are asking by "where u got that price now it cost too much one ktt kang white switch costs 3 cents and thers no board lesser than 50$ i mean reasonable quality ones whered u got that nice price"
this is an amazing guide to building this keyboard, I have done everything said in this video and my keyboard has turned out amazing and it was very easy!
You always make even the most basic boards sound premium. Nice keycaps too.
because i could only afford to buy basic board 😅 thank you.
this is the exact build im going to do for my first keyboard build! so excited :))
Me to haha
yo same
the sound is just like knuckles popping and i like that :)
Nice, no interference with the cherry profile keycaps and the north facing leds.
Great this is the exact build i am doing thank you so much for doing a demo of what it sounds like 😊
If you put silicon dampening or moldable eraser rubber material in the bottom of the case instead of the foam you would even get a much deeper and better sounding keyboard! But good job on what you've done so far!
defo making this, thanks for that! i'm so happy to finally get rid of these outemnu blues :D
Good video, with enough details but not too much. Keep it up!
sounds great from both mics 👌👌
thank you. ☺️
Bro this is heavenly like fr...
nice build i enjoyed the vid keep it up man😄👍
Man, that was clean thock on a budget! Btw, i have the same keyboard like yours but, the sound wws completely different. Did i just made a mistake while modding the keyboard?
This is fire even better than gaterons!
1000th subscriber!
Can you do a sound test for the ktt red wine using this board? Want to know the differences between the ktt red wine and the ktt white switches
Hello, have you bought the redwines or kang whites? If you did, what's the difference in sound? Are they deep or loud
how do you fix the rattle stabs pls tell me
8:20 Why need to cut off ?
tips on lubing switches. i tries lubing my durock plate mount switches today and i fail horribly the stabs would not come back up at all and stay down
When you added the PE foam and made holes for the switches did you poke all the way through or just through the PE foam?
You should dig a plate hole on the right of the spacebar right on the top of the screw hole will have a better spacebar sound
so where are people actually getting this board for $12 from?
Nice video!
Hey! Very nice build! Could you please say where you got the keyboard kit for so cheap? Thank you!
Wow, I also use the same stab mods and KTT kang whites but mine sounds poppy. Maybe it's the ABS keycaps and no mods to the case.
Can this keyboard be connected by wire?
Thockiest budget ever 😍
fav budget so far 😍
Which clip sounds closer to the real (and actual) sound of the modded keyboard? The clip using your blue yeti or the one using your iphone 12 pro max?
can u gaming on that board
where did u buy the tester 68 kit?
nice video! can you leave the link for the products? i only find way expensive than your description:(
^^^^^^^^
does ktt kang white have north facing interferences on the keycaps?
How did you make the large keys less mushy?
Thanks for the vid. One question, do you think this keyboard can have interference issues with cherry keycaps? I've heard that it is a thing w north facing led/switches
what's the japanese keycaps that you have when you did the stab testing?
where'd you buy the switches
No interference with cherry profile? Since its north facing.
It has long pole stems but the interference can happen if your keycaps is too thick or the switch has normal stems (only for north facing board)
how did you connect it via bluetooth?
great video
ktt kang white or gateron yellow ks3x47?
nice vid ^^ can u give the link for the products :0?
Is it south facing? Or is the cherry keycaps somehow fit fine with ktt switches even if north faced?
If xda profile+kang white+ciy 68, thocky or clacky brow?
i think it would be clacky. I use kang white in my tester 68 and it results in poppy sound.
where did you buy the keycaps because I wanna buy it
would it be possible to add a daughter board inside the keyboard? I really want it because its cheap and already very nice because it has preclipped stabs, etc etc but I want a wired mode because i play a lot of rythm games :'l
if you look at the PCB it looks like the bluetooth transmitter is soldered on there. all you have for wires is the two from the battery compartment - so tldr, i highly doubt it's possible. i did a little searching on google and reddit and they seem to agree. which is really sad bc this is the exact same issue i have with it, it's perfect otherwise!
@@RamtheCowy i see, a sad moment, my other options were the tes84 kit which is only wired or the epomaker th66
@@willtogs right, and they're way more expensive which is sad. the other thing that kind of dissuades me is the janky firmware/software situation with these
how long did the process take
this sounds soo nice. Im planning to use the same configuration as you. Btw are the tester 68 stabs clipped?
no they arent but some youtubers somehow got them preclipped so im not THAT sure
i got them preclipped
the black one I got was pre clipped
Newer batches have them pre-clipped
Just built the tester84 out myself but used some XDA profile caps to avoid interference! Do you find yourself experiencing any with the cherry’s in this build??? Would love to use some cherry on mine 😅
Does the cherry keycap has interference?
We’ve been waiting for a new upload. Miss your uploads. 你在哪裡？我希望你還好！😊
where did find it for 12?
Shopee
Should I change the stabs?
Btw nice video!
no
@@zyxify9429 yes pls do
@@mylessstuff1199 why they are really good when they are holee modded
imo, they're already really good, but if you do what to change the stabs, I recommend using Durock Plate mount stabilizers
Does the ktt whites have interference with cherry profiles?
It will still have interference if you use thick keycaps like GMK for example. If you use other clone keycaps or perhaps Akko keycaps then interference is not an issue.
@@huunhanle3809 ok thank you 😂😂😡😡😭😭😭😭🤣🤣😳😳😶😶😢😢🥶🥶😀😀💀💀💀💀🤣🤣😈😈🥶🥶😢😢😳😳😢😢😢😢🤣🤣
creamy sound. I like it
Awesome👍
Can the pcb be modded by making it wired?
Where did you buy it?
What deskmat do you use?
Between KTT Red WIne n Kang White, which do you prefer?
i think red wine has higher pitch? Also lighter. So it all comes back to preference
can Krytox 205g0 lube switches ?
sorry i'm new
yes :D
Why do the switches only cost 8$
You should try and review the Tecsee brand switches sometime, I’m having trouble decided between the Ruby’s, diamond linears, and ice candies. I heard the ice candies were basically just aqua kings for half the price.
Anyway it looks like they have great switches and most are factory lubed and come into about 50-60 cents a switch. Good quality low price
Jadeite is thocc af.
Purple Pandas were my first tactile, and they're alright. At $32 for 90 pcs I don't have much to complain about.
hey what so u use to wire balance?
Since this is 3 pin, would it be a good idea to film these switches?
Kailh style housings are already super tight, they wouldn’t benefit at all from films.
@@nearly- Alr thank you
Did you notice any interference using cherry profile keycaps?
dubi gloopigloop
out of context, but can I know what usb hub u using?
Wait, the board is north facing so there should be keycap interference right?
Get akko cs switches and you won't need to worry about key interference :)
@@janmartinzamudio3031 thanks, I already planned to get akko rose reds cuz they sound nice and budget:))
@@khoinguyen-cc3mo unless you're planning to use cherry profiled keycaps, I suggest buying Gateron Milky Yellow Pros, other than that, I'd say that's going to be a good build. Good luck!
@@janmartinzamudio3031 thanks, i wanna use gmk botanicle because i like how it looks, and also im fine with akko rose red so it’s not a big problem
@@khoinguyen-cc3mo I have the akko rose red and it has an interference with thick cherry profile keycaps around 1.5mm.
That spacebar upsidedown tho 💀
How tf did you get ktt kang white for 8 dollars?
And where did ypu get this board for 12$
Wait, are you using cherry profile on a north facing board? Does the KTT Kang whites help with interference? That's insane for the price if it does, cuz I have the same exact keyboard and I want a little poppier thock
KTT Kang Whites are long pole, so that might be the reason that there's no interference
Ktt kang White s aren't long pole. But, maybe the cherry keycaps is thinner than the usual keycaps so there is no interference
Wait, you using cherry profile caps. No interference?
dubi gloopigloop
Are you left-handed?
Can't wait to put $80 worth of switches and caps on a $10 board
If I could have this keyboard, I would touch it all day long!
Are those KTT Kang White V2s still have long stems?
The V2 and V3 still have long stem. Actually I believe that all KTT switches does all long stem pole.
@@huunhanle3809 thank you! Have you tried them on cherry profile keycaps if there is interference?
@@renztrojillo I have noticed that the interference only show up clearly most when you use thick Cherry profile keycaps like GMK or any keycaps that has thickness of 1.5mm. Other than that, any clone keycaps that has the thickness around 1.2 - 1.3mm won't have much issue with interference -> combine that with the long stem of the Kang White and you don't have to worry much about Cherry profile interference.
Alternatively, Akko's Cherry profile keycaps will suit well with Kang White too. As they don't thick as much as GMK and Akko does have a lot of North-facing prebuilt keyboards that use Cherry profile keycaps. Hoped this help you :D.
@@huunhanle3809 thank you so much!!
the first seconds of stab testing scared me lmao
me watching this video with my Ciy Tester84 :3 wanting to know if there is any interference using cherry profile keycaps hahah
I also use the ktt kang whites v2 hehe right now I am using my xda profile keycaps and wanting to buy a cherry profile one
@@zegiyt4069 ktt kang whites are long pole so you should have no interference even with cherry profile.
@@batmanh8899 oh ty ty I will buy cherry keycaps next week hehe
how's the battery life?
Many people have said 2-3 months
Your music is 128kbps but I like it
can i pwease have the ktts im in love with it
sure. ԅ(˃̶͈̀௰˂̶͈́ԅ)(give you)
how is this so cheap
where u got that price now it cost too much one ktt kang white switch costs 3 cents and thers no board lesser than 50$ i mean reasonable quality ones whered u got that nice price i already have gateron pro blacks installed they sound pretty nice and smooth but i like ktt kang white switches sound they are more poppier i havent used them so should i spend more to get ktt kang whites or gateron pro blacks dosent have much of a difference if anyone used both let me know thanks in advance ktt kang whites are costing me arround 18-20$
?
what do you need
@@platypussoup7827 th66 PC plate no Bluetooth and ktt Kang white v3 switches
@@bronzehawk3646 what were u trying to ask? I cannot understand what you are asking by "where u got that price now it cost too much one ktt kang white switch costs 3 cents and thers no board lesser than 50$ i mean reasonable quality ones whered u got that nice price"
@@platypussoup7827 look at his description he got everything so cheap
Absolutely no way those prices include shipping
🧢🧢🧢🧢
sell me this board please :( I live where it is impossible to get lube,keycaps,switches anything
where do you live?
@@quadingledale8031 Bosnia and Herzegowina. I don't mind waiting as long as it takes..
You can’t order it off AliExpress?
@@Zelda00Gamer no shipping or if there is , they offer 100$+ just for switches :(
Amazon
pretty sure spend lot money for the battery later lmfao
Jackson James Lopez Susan Jones Jose
𝓹𝓻𝓸𝓶𝓸𝓼𝓶 🙏