www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc this should be the correct link
It does have two mix bottles but for ease of use I just went with the foam bottle because it comes with the nozzle needed to Spray foam properly as well.
The tanks on the pressure washer are not to create foam buddy that's just to spray out the soap,concrete wash,or whatever detergent but no foam as far as foam like a foam cannon does not come out of the tanks
@@ChooseYourDestiny That's good to know also but what I meant was what's the size of the orfice on the foam cannon that you use. It's that little brass or stainless steel thing that creates the foam you can screw it out and change them out to your preference?
I deleted my first reply because I found this and it should be the correct one www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc
Hey, can you PLEASE let me know the specs of the adapter you bought to use the foam cannon? I’m getting so many different results and answers online and I don’t have the money for trial an error..
www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc this should be the correct link
Thanks so much for the video! Very helpful. I’m probably going to go with the sun Joe and foam cannon you have. Would you still recommend? Any problems with these products? Thanks!
The only thing I don’t like about the sunjoe 3000 is the high pressure tube is too short. I have to constantly move the pressure washer to get my entire car
Just a quick tip. Make sure your washing from the roof first then downwards. I usually try to keep the lower panels like the lower fenders and the wheels at the very last stage or even better... a separate sponge entirely so you don't track up grime into the upper panels. Sounds a little picky but the little things count into a great exterior wash and detailing job!
Yea I definitely try to keep that in mind, I usually start with the windows then try my best to go top down. A separate sponge would definitely be the best thing though thanks for the tip.💪
I think it makes the content funner to watch. I mean all u would hear is the pressure washer otherwise which isn’t very loud it’s just a little water pump noise
@@ChooseYourDestiny you should think about getting the black 5.0 badges to match the pony up front. That’s what I did and it looks sick. Along with the 2015 GT black badge for my new decklid. All my badges are now blacked out and it looks good.
great video! 👍 what was the adapter you got to get the shorter handle and quickly click in the longer one if needed? thanks
www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc this should be the correct link
hi, curious why you used foam bottle, should sun joe spx3000 already has two bottles builtin for mix soap with water? Thank you.
It does have two mix bottles but for ease of use I just went with the foam bottle because it comes with the nozzle needed to Spray foam properly as well.
The tanks on the pressure washer are not to create foam buddy that's just to spray out the soap,concrete wash,or whatever detergent but no foam as far as foam like a foam cannon does not come out of the tanks
@@ChooseYourDestiny
What was your orfice size buddy?
I use the grey nozzle 45 degrees for my car if that’s what you mean
@@ChooseYourDestiny
That's good to know also but what I meant was what's the size of the orfice on the foam cannon that you use. It's that little brass or stainless steel thing that creates the foam you can screw it out and change them out to your preference?
Can you post link to all parts needed to use quick connect on Sun Joe gun for foam cannon?
I deleted my first reply because I found this and it should be the correct one www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc
Hey, can you PLEASE let me know the specs of the adapter you bought to use the foam cannon? I’m getting so many different results and answers online and I don’t have the money for trial an error..
www.amazon.com/Mingle-Pressure-Washer-Adapter-Connect/dp/B07HMHBLRD?pd_rd_w=uWTN1&content-id=amzn1.sym.b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_p=b9b1bcce-89ca-4e95-8ab9-11472ef3b705&pf_rd_r=KQTJ91DK2R6ERXSE8A2M&pd_rd_wg=jNzjN&pd_rd_r=10674e15-ce70-4b36-88f0-d66e709490c8&pd_rd_i=B07HMHBLRD&psc=1&ref_=pd_bap_m_grid_dv_rp_0_1_sc this should be the correct link
Thanks so much for the video! Very helpful. I’m probably going to go with the sun Joe and foam cannon you have. Would you still recommend? Any problems with these products? Thanks!
I actually used it today it’s been doing well.
What size is the quick connect
Now I could be wrong, but I am pretty sure it is a 3/8 inch it’s pretty standard for pressure washers.
@@ChooseYourDestiny bet 👍
Intro = ⛽️
A year later, is the pressure washer working with no problem? The quality seems frail
Mine is still going strong I used it a few days ago actually
What was the piece dimensions or spec to make the gun much shorter? What was it basically?
I just asked as guy at the hardware store for a quick connect. You could even bring ur wand in the store and test fit it
Nice job man
Thank you 👍
Does it have to be connected to electricity? Cause I want it for mobile car detailing? Or the cable is only for recharge?
It has to be connected at all times
The only thing I don’t like about the sunjoe 3000 is the high pressure tube is too short. I have to constantly move the pressure washer to get my entire car
I completely agree I wish it was maybe 5 feet longer and it would be perfect
@@ChooseYourDestiny Amazon sells a 25ft tube… and a 50… I’m probably gonna op for the 50, just gotta figure out how to store it
True that👍
Finally found your channel again. The name changed trucked me over
My bad 😂 welcome back
@@ChooseYourDestiny thinking about buying a 3valve 2010 bc the manual Transmisson is better than the 2011-14 gts
Not a bad idea but most people I know with 3 valves all wish they had a 5.0 but to each their own ya know. I do rlly like the sound of the 4.6
Just a quick tip. Make sure your washing from the roof first then downwards. I usually try to keep the lower panels like the lower fenders and the wheels at the very last stage or even better... a separate sponge entirely so you don't track up grime into the upper panels. Sounds a little picky but the little things count into a great exterior wash and detailing job!
Yea I definitely try to keep that in mind, I usually start with the windows then try my best to go top down. A separate sponge would definitely be the best thing though thanks for the tip.💪
Why the music?
I think it makes the content funner to watch. I mean all u would hear is the pressure washer otherwise which isn’t very loud it’s just a little water pump noise
@@ChooseYourDestiny I had to mute the part with the music.
Thanks for the input
Great video
Appreciate the support💪
Damn, we have the same car lol.
That’s actually rlly cool💪🏽😂
@@ChooseYourDestiny you should think about getting the black 5.0 badges to match the pony up front. That’s what I did and it looks sick. Along with the 2015 GT black badge for my new decklid. All my badges are now blacked out and it looks good.
Yea I’ve thought abt that but at the same time I do like the shiny 5.0 badge it matches my little exhaust tips lol