Great to hear how you have cracked the code to the Villages! As being a son to a politician my whole life I learned quickly it is not what you know it is who you know!
50:00 looks absolutely incredible! Love seeing the different methods used in advanced detailing. So much more in-depth than a basic wash job. Good luck with the business endeavors. Definitely got a lot of irons in the fire!
I learned the rinse from the bottom up technique from Rick over at RAD Garage and I especially do this during the winter at the local pay n sprays to maximize the cleaning from the soap on the panel. Furthermore, loading up the tire brush with Brake Buster is something I mainly do in the winter to ensure I have good coverage cleaning the tire because I won't be revisiting tire/wheel cleaning when I get the car back in the garage. Those other cleaning options you mentioned were great for those that are looking for more than one way to wash their car!
Matt, the Bilt Hamber Touchless to rinseless wash process is something I think you should really explore more. After using Touchless, with your pressure washer setup, the car is 95% clean. Doing a rinseless wash in the garage afterwards would be perfect. Also - McKees just came out with N914 V2.
These videos are great. Can’t be overstated. I wish you carried everything that’s on my current buy list. Maybe I want to buy certain products as an under informed consumer
Gotta say I admire the passion for taking care of the people that work for and with you. Wish more people in charge would do things like this. ironically enough I was actually just thinking myself “oh yeah a brick and motar store would be amazing and what if Matt franchised out to other locations”. Foot traffic for brick and motar is hard to capture for niche stores though. I feel like you’ll probably make it work eventually. Excuse the idea rambling.
@Chem-x talks about rinsing from bottom to top and the static cling of the product on the paint. It also helps you see where you rinsed, in his case because most of his washes are touchless...
Yeah my two step soaps loosen road film and then the power washer is what’s cleaning from there, so I’m not rinsing as much as cleaning with the high psi, final rinse would still be top down😁
Personally, I would borrow from a bank. I would sure hate to see some investor/partner push against your vision. However, you are a successful business guy so I’m here for it either way.
I know you are a fan of this new pre soak foam but I’m staring to think it is something I’m not really going to need as I wash often and never let my vehicles get that dirty similar to yours. Plus both of my vehicles have already been coated. One less step in the process to worry about
You've got the cleanest E92 out there, Matt - well done! Do you find the ride height is a pain at all for scraping the front lip on driveways or even highway dips? Which exhaust system did you end up sticking with?
Thanks Matt@@ObsessedGarage - appreciate it. Because of your E92 content, I picked up a 2011 E90, so I'm very interested in the clean mods you've done on yours. Which seats did you swap to? They're perfect for the car.
“Underwater basket weaving….” Lmao Have you ever tried Autofiber’s Flat Out pads? It’s an edgeless 700 gsm pad that is firm, but flexible on all the curves of a vehicle and doesn’t get too heavy…rinses well-doesn’t hold onto debris or dirt…they’re awesome!
What is in the bottle he sprays while wiping the car off. Haven't been on this channel for a while. As an idea for desalination you could look into the units they use for yachts. If you can remove salt from sea water for a large boat to drink, shower and clean. Then surely there should be.design features or efficiency you can draw down from. If memory serves me they were not as expensive as one would expect.
Matt, Would destination OG ever consider getting into selling appliances for the home? This would bring in other eliminates of the destination OG experience. Just wondering
pH neutral soap lacks the necessary make-up to do any real cleaning. I use it for the lubrication. Prewash stuff is generally alkaline and will do more work at removing dirt.
@@ObsessedGarageoh okay that makes sense. Was wondering that for a while cause I always have a bunch of soap and was wondering if the pre wash was worth it
You could look into the "Water on the Go" DI systems. They may have higher flow rates in their larger systems. I use the small dual bed system with 465 TDS water. Brings it to 0 to 1 TDS.
Good idea, not so good execution plan! You’re not a partnership kind of guy. You’re looking for someone to foot the bill and have little to no control. While it might be slow, reprioritize all the Matty ideas and allocate the appropriate time and resources to this idea.
*sigh* so 2 weeks ago I had the idea to get some gear and I recorded my first car wash and talk video... And then I discovered your wash and talks... Thought I had an original idea 😔 Or.... Great minds think alike? Hmmmm...
Yes, but...it's not quite that simple. I've had a cost segregation study done, so I'm able to receive a substantial accelerated deprecation deduction in years 1, 2, and 3. To get the biggest benefit, OG, LLC needs to own it. Then if I transfer it to another LLC and pay myself rent, you still have to pay sales tax. The benefits are as simple as it may seem.
Matt, on my recommendation it's too difficult to discern angel investors fromn sharks; instead I would recmmend a mentor/business historian whom has been through the challenges and can guide you.
Another product for your consideration: Koch Chemie Teerwäsche A (Tea), possibly in place of Eulex. It is every bit as effective for "normal" tar or adhesive (with a little extra dwell time) but much safer for different types of surfaces. I ran into an unfortunate situation with Eulex when I was removing PPF adhesive from a side mirror on my X5. A small amount got onto some black plastic trim and it stained/damaged it pretty badly (I was able to minimize it with Solution Finish). I did the rest of the vehicle with Tea and had no issues with it on the trim. It does take slightly longer to act, but is still very effective.
Have you tried Gyeon Tar? It's safe on plastics and even polycarbonate plastic headlights. Personally I keep Tar and Eulex, but only use Eulex when Tar won't cut it or for debadging.
Everything this dude promotes is a ripoff- everything on the OG site is priced horrendously. $200 for 2 buckets is fuckery!!! I’m pretty convinced he’s a serial killer. Zero emotion at all.
Great to hear how you have cracked the code to the Villages! As being a son to a politician my whole life I learned quickly it is not what you know it is who you know!
50:00 looks absolutely incredible! Love seeing the different methods used in advanced detailing. So much more in-depth than a basic wash job. Good luck with the business endeavors. Definitely got a lot of irons in the fire!
I learned the rinse from the bottom up technique from Rick over at RAD Garage and I especially do this during the winter at the local pay n sprays to maximize the cleaning from the soap on the panel. Furthermore, loading up the tire brush with Brake Buster is something I mainly do in the winter to ensure I have good coverage cleaning the tire because I won't be revisiting tire/wheel cleaning when I get the car back in the garage. Those other cleaning options you mentioned were great for those that are looking for more than one way to wash their car!
love your love for m3s. its what got me into this obsession of paint preservation
Will Matt remember to apply Brake Buster directly to the brush???
Maybe! 😆
Nope😂
on wheels 3-4 i think he will.
It's very interesting to learn about your business plans. I know you'll take OG into a prosperous future. Very exciting to follow the journey.
It’s going to be an exciting year. Looking forward to what you have coming.
The car looks incredible! Great to see how much you enjoy it
What a treat this is…outside wash n talk is the best!
Matt, the Bilt Hamber Touchless to rinseless wash process is something I think you should really explore more. After using Touchless, with your pressure washer setup, the car is 95% clean. Doing a rinseless wash in the garage afterwards would be perfect. Also - McKees just came out with N914 V2.
Town Square business concept sounds cool. Clear glass garage doors too. Industry name is a ‘full view door’.
E92 got depth in that gloss. Looks real good Matt
Awesome your thinking about your employees and them having access to the resources!
As a bmw fan and owner the m3 is one of the reasons i start watching your videos
These videos are great. Can’t be overstated.
I wish you carried everything that’s on my current buy list. Maybe I want to buy certain products as an under informed consumer
Gotta say I admire the passion for taking care of the people that work for and with you. Wish more people in charge would do things like this. ironically enough I was actually just thinking myself “oh yeah a brick and motar store would be amazing and what if Matt franchised out to other locations”. Foot traffic for brick and motar is hard to capture for niche stores though. I feel like you’ll probably make it work eventually. Excuse the idea rambling.
Good cleaning technique for an outstanding car... regards from Perú
these are so satisfying and soothing to watch lmao
This garage build is gonna be epic 🎉🎉
That M3 simply is stunning
beautiful car, i had a white e93 m3 with fox leather. the bucket trolly needs a high level handle, i think it would help with moving them about
@Chem-x talks about rinsing from bottom to top and the static cling of the product on the paint. It also helps you see where you rinsed, in his case because most of his washes are touchless...
Yeah my two step soaps loosen road film and then the power washer is what’s cleaning from there, so I’m not rinsing as much as cleaning with the high psi, final rinse would still be top down😁
goals have time to go to cross fit , wash car and go mountain biking WHILE having kids and tending business and family.
I'm late, but I bought your new soap, and it's fantastic.
You need some golf cart solutions for the Villages, that would kill it.
Respect to you for using the lower tier AR pressure washer against the man yelling in the street instead of the Kranzle
Whoa I drive through the villages all the time, it's crazy how quickly they're building that stuff there...
Cant wait for it to get warmer so I can wash outside again
RO and DI combination is the ultimate is water treatment but you'd need a water storage tank to hold the water and have that feed the dual Kranzle's.
Personally, I would borrow from a bank. I would sure hate to see some investor/partner push against your vision. However, you are a successful business guy so I’m here for it either way.
I know you are a fan of this new pre soak foam but I’m staring to think it is something I’m not really going to need as I wash often and never let my vehicles get that dirty similar to yours. Plus both of my vehicles have already been coated. One less step in the process to worry about
You should wring out the pad after rinse. Because when you rinse without wringing. You carry more rinse water than wash water to the car.
You've got the cleanest E92 out there, Matt - well done! Do you find the ride height is a pain at all for scraping the front lip on driveways or even highway dips?
Which exhaust system did you end up sticking with?
It's clear on the road. I just have to careful when approaching driveways. You get used to it. The exhaust to get is 100% ARH full exhaust.
Thanks Matt@@ObsessedGarage - appreciate it. Because of your E92 content, I picked up a 2011 E90, so I'm very interested in the clean mods you've done on yours.
Which seats did you swap to? They're perfect for the car.
AMX Performance is matching Black Nappa leather.
How is the lumbar support for the lower back on them? I've got a bad low back...@@ObsessedGarage
Hey Matt, I was just curious, what do you think of the rivian models that were announced recently? Also what’s up with the Vespa?
“Underwater basket weaving….” Lmao
Have you ever tried Autofiber’s Flat Out pads? It’s an edgeless 700 gsm pad that is firm, but flexible on all the curves of a vehicle and doesn’t get too heavy…rinses well-doesn’t hold onto debris or dirt…they’re awesome!
I haven't, but I have tried many of his older versions.
Hello Matt.. would love the concept of bringing OG to Australia. How do we get into contact ? Thanks Matt
The bot comments have no chill
That’s what happens when you buy subscribers.
@@JimG89887 oh no....
@@JimG89887lol. Hahah.
What is in the bottle he sprays while wiping the car off. Haven't been on this channel for a while. As an idea for desalination you could look into the units they use for yachts. If you can remove salt from sea water for a large boat to drink, shower and clean. Then surely there should be.design features or efficiency you can draw down from. If memory serves me they were not as expensive as one would expect.
Matt, which outdoor cameras do you use?! I don’t think I’ve ever heard cameras mentioned.
They are just junk ADT cameras. I don't know much about those.
Would love to hear a little about what you prefer when it comes to cameras, in a video. If any preference at all. 👍🏽👍🏽
Matt, what is the best glass coating you have used? I am coating my glass in my shower LOL.
Don’t forget the jams this time Matt
Hey Matt, Have you tried the preforated synthetic clay towel of DIY Detail or Rag Company? If so, would like to hear your feedback.
Are those 18 or 19 inch wheels on the e92? Car looks amazing!
Matt when are you going to do the Active 2.3 review that you mentioned.
When I get back from California next week.
Matt, Would destination OG ever consider getting into selling appliances for the home? This would bring in other eliminates of the destination OG experience. Just wondering
That’s part of the plan.
Matty I was anti-mitt too, for some reason I got the deli-mitt when Corey first released it and I can't go back now.
Matt what is your thoughts on washing a car with a microfiber towel ? Sort of like ammo nyc does.
I hate doing that. It's too floppy and holds too much water.
Woahhhh don’t forget OG UK!
Yep...next year.
Anone ever use the incredipole or the mitt on a stick? I’m looking for a solid product. None have yet to meet my needs.
The pad is great, but the pole is kind of crappy.
What’s up with the scooter in the back there
I was hoping you’d do a dedicated 20amp vacuum. Take my money now!
It's next up. Grant from Modern Day is visiting later this month.
So is there a reason to use prewash instead of just regular foam soap. Like foam soap it wash it off then foam it again
pH neutral soap lacks the necessary make-up to do any real cleaning. I use it for the lubrication. Prewash stuff is generally alkaline and will do more work at removing dirt.
@@ObsessedGarageoh okay that makes sense. Was wondering that for a while cause I always have a bunch of soap and was wondering if the pre wash was worth it
Straight Bilt Hamber Touch-Less in the foam cannon....does your high GPM affect the PIR that much?
Yes, technically to get a 4% PIR, I would need a more concentrated product.
You could look into the "Water on the Go" DI systems. They may have higher flow rates in their larger systems. I use the small dual bed system with 465 TDS water. Brings it to 0 to 1 TDS.
Looks like their business size systems can do between 5 and 7 gallons/min
So theres a 2.0 of the touchless coming?
Good idea, not so good execution plan! You’re not a partnership kind of guy. You’re looking for someone to foot the bill and have little to no control. While it might be slow, reprioritize all the Matty ideas and allocate the appropriate time and resources to this idea.
What wheel is that ?? Looking good
Stock 359M Wheels
I need you to put the Evo up on a giveaway. Got lots I need to buy from the site I’m holding off tho.
Consider bitcoin on the balance sheet, Matt. Let it appreciate and use the fixed supply/deflationary properties it carries do it's thing.
Wash and talk on the Vespa?
We need OG house plans based around the garage.
Amen!
PLEASE
Didn’t you give this M3 away?
Matt, Why can't you do all of your bricks and mortar stuff at the bank building ?
I need the foot traffic of one of the town squares.
No worries@@ObsessedGarage. Coming from AUSTRALIA i'm not familiar with the town squares.
Hay Matt, can we get an update on the GT4 at the Helen house?
It's a Cayman GTS. It is there are ready to borrow with the house.
PPF the complete car, no swirls anymore. End less maintenance work
*sigh* so 2 weeks ago I had the idea to get some gear and I recorded my first car wash and talk video... And then I discovered your wash and talks... Thought I had an original idea 😔
Or.... Great minds think alike? Hmmmm...
Never mix your wheel cleaning mit with your paint cleaning buckets! What are you thinking.
When did he dunk his wheel mitt in the 2 buckets for the paint?
@@whitegoodman7465when he cleans the wheeks
There are carbon ceramic brakes on the car so it doesn't matter.
@@russellhagy not sure I understand the joke because of course it matters?
@@555fourthstreet8 There is no joke. Ceramic brake dust is not the same as dust from iron brakes.
Wait…Did I hear Matt say “contactless wash”, he’s looking for a business partner, and moving into another HOA community?
Ha, ha...
@@ObsessedGarage
This is going to be as epic as it gets!
So how many times do I soap my car while washing
Foam > Rinse > Foam > Wash > Rinse
@@aydonmillwhy are you foaming twice? You mean just for extra dirty cars?
@@555fourthstreet8 You don’t have to do it. But the first foam and rinse may help loosen or pull off dirt prior the the wash step
Couldn’t you own the building on an LLC and then lease it to yourself and have that count?
Yes, but...it's not quite that simple. I've had a cost segregation study done, so I'm able to receive a substantial accelerated deprecation deduction in years 1, 2, and 3. To get the biggest benefit, OG, LLC needs to own it. Then if I transfer it to another LLC and pay myself rent, you still have to pay sales tax. The benefits are as simple as it may seem.
Matt, on my recommendation it's too difficult to discern angel investors fromn sharks; instead I would recmmend a mentor/business historian whom has been through the challenges and can guide you.
That's the plan.
Another product for your consideration: Koch Chemie Teerwäsche A (Tea), possibly in place of Eulex. It is every bit as effective for "normal" tar or adhesive (with a little extra dwell time) but much safer for different types of surfaces.
I ran into an unfortunate situation with Eulex when I was removing PPF adhesive from a side mirror on my X5. A small amount got onto some black plastic trim and it stained/damaged it pretty badly (I was able to minimize it with Solution Finish). I did the rest of the vehicle with Tea and had no issues with it on the trim. It does take slightly longer to act, but is still very effective.
Have you tried Gyeon Tar? It's safe on plastics and even polycarbonate plastic headlights. Personally I keep Tar and Eulex, but only use Eulex when Tar won't cut it or for debadging.
Somebody else sent me an email suggesting that as well. Thanks for the tip.
@@KiranPatel-fk1pg I haven't. Will probably take me 10+ years to go through this 1L of Tea, so we'll see if I remember. 😂
I cringe every time Matt sets the ebrake. Its like hes gonna rip it out of the floor 😂
Ha, ha... I'm just that strong.
RW Ftw
What’s the backstory of your comment “when your driving improves”? Love your business vision!
Austin Texas brother
Where's the SNOT!
Matt does your brain ever stop thinking outside the box?
Nope...that's part of my problem.
1 thousandth view 🥳
👍
Matt needs some sun
This isn't false.
❤
i would be willing to invest 500k
Everything this dude promotes is a ripoff- everything on the OG site is priced horrendously. $200 for 2 buckets is fuckery!!! I’m pretty convinced he’s a serial killer. Zero emotion at all.
That's complete nonsense.
Ty bro I listen to lots of what you say. ❤ CarPro 🦾💦⛽💦