How at your car appears so much range after reset -40.000 miles? and at mine is only 20.000km on front and 30.0000 in the rear brakes. I have brand new brakes and sensors!
Hey, i know its an old vid but yours in on the top of my search. I did changed my pads. Do i need to get a new sensors? Or just do like your video instruction?
On my video is not possible because i just did it 2 min before so wont do it 2nd time. If you replace pads and genuine sensors and follow my video should work fine as did for so many other people. If it doesn't you may need another issue. Remember E brake /hand brake activation as the video shown. Good luck 😉😉
@@Macrame78 have you replaced brake pads and sensor???if you dont change the sensor also won't reset. Has worked for thousands of people so you probably not doing something right. If you follow my video steps carefully after pads and sensor replacement should 100% work. If doesn't maybe sensor is not connected properly all way in or is a faulty sensor
I didn't know you have to lift up the hand brake.
Thank you for the tip
Thank you.
That Worked 😅
Keeps on saying reset failed
How at your car appears so much range after reset -40.000 miles? and at mine is only 20.000km on front and 30.0000 in the rear brakes. I have brand new brakes and sensors!
Diferent countries may have diferent service intervals.
thanks works perfectly
Hey, i know its an old vid but yours in on the top of my search. I did changed my pads. Do i need to get a new sensors? Or just do like your video instruction?
If your warning light for brake pads has come up i believe you will need to replace sensors too. Hope that helps
100 % working
Do you have any advice to help me. When I hold the button on the dash I get the main menu and no option to reset the brake at all.
Do you have a message coming up with brake pads worn or life remaining 0??
Thank you!
How does 26 people not get it 😂😂 stick to office work
0:38 is not possible at all. Had nothing to do with E brake or something. 🥱
On my video is not possible because i just did it 2 min before so wont do it 2nd time. If you replace pads and genuine sensors and follow my video should work fine as did for so many other people. If it doesn't you may need another issue. Remember E brake /hand brake activation as the video shown. Good luck 😉😉
I can not reset, ...
Have you put handbrake on???
@@bonnin38 do not have handbrake, I had electronic brake, but I tried all options, the computer does not allow me to reset
@@Macrame78 well electronic brake is the handbrake on that vehicle. Has to be on/applied for the system to reset. If is not applied won't work
@@Macrame78 have you replaced brake pads and sensor???if you dont change the sensor also won't reset. Has worked for thousands of people so you probably not doing something right. If you follow my video steps carefully after pads and sensor replacement should 100% work. If doesn't maybe sensor is not connected properly all way in or is a faulty sensor
@@bonnin38 no, I replaced the sensor, the problem is after sensor replacement the reads are wrong in the computer and I can not reset it.