Converting an Old Rusty Work Van into our Dream Camper: Episode 11

Kyle heads to Indiana to team up with his Dad to help with the van conversion! In this episode we install a backup camera, start to get the full electrical system in place, but most importantly we create the bed frame and finally wire up and test our off-road lights!
Items used in this video:
Bed frame: rstyle.me/+9x1...
Roadshock Edge 6 Off-Road Lights: www.harborfrei...
Backup Camera: rstyle.me/+Mzy...
We started this TH-cam Channel to share our van and travel content and we have over 250k followers across our IG, TT, and FB, find us there!
/ melissaashleymeares
/ melissaashleymeares
www.tiktok.com...
For all our material sources, you can visit: linktr.ee/meli...
This description contains affiliate links. If you click on one of them, we receive a commission at no cost to you. It helps to support our channel and future content!
#offgridliving #vanlife #vanbuild #conversionvan bc #vanbuild #sprintervan #campervanconversion #campervan #cabinet #diy #bed #backupcamera

[@MearesLiving]

You'll like the on/off switch for the backup camera because if it's night and you hear something, you can turn it on to see what it is.

[@MelissaandKyle]

Oh good idea!!

[@Pootz1000]

You didn't show any sealant around the wire gland on the roof. From experience 8d put some around it and possibly underneath it too as theyre prone to leaking.
Also, rubber grommet for the wires to pass through the hole in the roof to stop them rubbing the sharp edges and cutting

[@MelissaandKyle]

Thanks for the tip! We actually put both of those on, it just didn’t make the video, but if you look at when we’re screwing them down you can see butyl tape getting pushed out from underneath the gland. And a rubber grommet was used on the hole in the metal!

[@deborahbrebner1237]

Please list the door stops you mention. Thanks

[@MelissaandKyle]

here you go! rstyle.me/+yHg2iPM6CJfm1nxYpK0s5g