iPhone 6 FPC Connector replacement
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2024
- 🟥 Tools, suppliers 👉👉 movilone.eu
Today we ll present the fpc connector replacement on iPhone 6, the complete process that we ve done for our client.
Repair iPhone how to change the FPC connector. This tutorial serves for any iPhone. It is a bit complicated process and needs some attention & tools & experience.
You have to be careful when you soldering the connector and do not apply too much heat. We can use tin paste to not raise the temperature too much.
MovilOne is not responsible for any damages that may occur during the repair due to missing tools or insufficient experience.
Comments and questions regarding this repair are always welcome :)
*✅ Become an EXPERT👉👉* movilone.eu
This is absolutly professional. Respect 👍👍
Thank you, Serdar xxx! Best regards
This guy is a genius!
Teamometeamo, thank you for your comment! Best regards
You make it look easy. Respect!
A'm learning a lot as a upcoming technician
Hi - great work. Do you put solder on the legs of the fpc connector before setting it in place on the mother board?
this is such a great video anyways let me ask? is that what u replaced is a fpc touch on board?
Amazing sir..... ❤️ Microscope konsa use kya ha sir
HI DEAR YOU WORK LIKE CHARMING WICH SOLDERING WIRE YOU ARE USING PLEASE REPLY
Thank you
Very clean work 😘
Thank you, Yarr for your appreciation. best regards
Hi thank you for sharing useful content, Do you have a link for your services ?
perfecto ! thanks mister , pls what is name past flux you was use ?
Hello, Mouscool! I m using Amtech and i recommend it! Thank you for watching!
@@MovilonePhoneRepair thanks Mister , we want more vidéo from everyday Thk
Sir mere i phone 6 ka fpc conecter tut gya h repair ho sakta h ya nhi or hoga bhi to kya cost aayege plz reply me sir thank you
Well done sir
Perfect tutorial. What tipe hot air you used?
300 celsius degrees with 50 of air.
Hi, great tutorial. What heat tape do you use at the beginning ? Thank you
kapton tape.
Great Job, but is really difficult to understand temperature. Possible to write?? Regards
why does the solder go right onto those contacts? looks like it just goes right into the right places?
That's why you use flux.
Thank you so much M♥Vil One.....Very Good idea.... I like BD🇧🇩
shahjalal sowpon ❤️thank you too for your comment! Best regards
Hi which one Aircon machine are you using because it is more better and for plastic
Great will practice
GYPSY HOBO alright! If you need more information, please let me know! Best regards
I have same problem but in OnePlus 5 can we solve this problem with same method
Yes, you might try. You need some special tools and a little bit of experience :) Good luck!
*Hi.* Where to buy rear camera connector FPC 37pin (20+17 pins)??? Do you have to
sell?? Looking for it over a year :( Or I will buy damaged Xiaomi Mi5
motherboard with good connector!!
How much does it cost for iPhone 11 repair?
I have replaced the battery from a local shop. After battery replacement. The phone was working for 10 days. Suddenly the display is just blank. Iphone gets detected in iTunes. It also detects the SIM card .But display is just blank.Data is very important for me .kindly help me to rectify this problem.I can ship this device to your place.
Hello,DIY AND ASSEMBLING ! You should try with another screen, first! Best regards
Is advance Microscope ? Which company?
what tape sir?
name of tape?
What was the fault of this connector? no charging, no 5volt, or bad soldering?
Hello, Paidi!It is the connector of the motherboard, responsible for transmitting the image to the screen. But the tutorial can be used for any fpc
Can you tell me, what i bought for this please?
You can try on AliExpress. Best regards
What are all the ingredients you beed to solder
Nice video.,,,
Thank you very much for watching this tutorial! Best regards
good , professional
Thank you :) Best regards
Apka shop kaha par hai
Gracias buen tip amigo. 🤠👍🏻
Gracias, Eric por tu comentario y por visionar este tutorial! Un saludo cordial
What microscope used
Amscope 90x. Best regards
Good & tks
Thank you too for watching! Best regards
What is the liquid you put before ?
Did you mean the solder paste?
@@MovilonePhoneRepair Hi ! I know now. It's the flux. Thanks
wich smd use ?
Goddamn you guys made this look so easy, I tried and just couldn’t get it to work unfortunately, I’ll just stick to soldering slightly bigger components lol.. 😂😭
location pliz
We are located in Spain. Best regards
Thank you
Thank you, too Mohammed for watching this tutorial! Best regards