Janus 250 Stage 3 and 4 installation tutorial
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- This video will show you step-by-step on how to install your MotoCult Stage 3 Performance Package. Stage 1 and Stage 2 can also be installed using this video. Chapters are listed in the description. Enjoy!
Video Chapters:
0:00 intro Installing MotoCult carburetor parts:
13:27 Removing the exhaust:
15:15 Removing the flywheel
21:59 Removing the top end
38:42 Installing the Power Cam
52:19 Installing the lifters into the 250cc cylinder
55:18 Installing the rings onto the piston
59:34 Installing the piston
1:05:38 Installing the cylinder
1:15:41 Installing the head
1:21:49 Installing the push rods
1:24:30 Installing the rocker arms
1:30:11 Adjusting the valves
1:40:26 Installing the carburetor
1:44:12 Modifying the upper engine bracket
1:44:51 Installing the exhaust and gasket
1:47:25 Final steps
1:49:11 IMPORTANT break in suggestings
My phase3 kit is already installed, still watching the video.Devin thank you for taking the time to do this.
I was considering taking the bike to a local shop to get this done (since I'm not the fastest wrench-turner). But this explains a lot and gives me an idea what I'm in for! (Plus there's the benefit of needing a new torque wrench!) Thanks again, Devin!
Thanks Devin, I got my Stage 3 kit installed today while following this awesome tutorial.
Thank you for the shop organizational suggestions.... I think new wrenchers need a lot of that soft-skill guidance like that.
Thanks for this great vid Devin however why wouldn't you include footage of a ride so we can witness the performance and hear the exhaust?
Wow....fantastic video! Thank you. I think I'll end up buying one of these kits.
Great video. Thanks. BTW, anyone else notice something unique about this particular Halcyon?
The most unique part....it's not a Halcyon, it's a Phoenix;0)
@@kottomack I agree but the airbox says otherwise. ;-}
Maybe it's a new model, the Halcynix....?
Wondering if using a band clamp like what you would use on HVAC duct, would make getting the cylinder over the rings easier.
What are the specifications of each stage? what is your interpretation of a stage? to one person, stage 1 may be a muffler, To another it may be everything external being replaced. a third person will have stripped the engine bare and replaced every single part as they will only pull the engine apart once, and the engine will produce 5 times it's original output. and to them that is the ONE and only stage they will consider... aka stage 1!
Quit saying stage, and start saying "intended purpose kit" and say what the specs are. People need to know if a camshaft will get them down a dragstrip or up a steep hill. it can't do both!