ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2019
- When offloading it's nice to have more clearance. An inch literally makes a difference.
Check out the video and see how.
It's important when you're done to torque them evenly to 93 ft lbs and check them VERY often like 100 miles, 250, 500, 1000 to be safe.
I got these bump stops and flip kit from Duro Bumps
www.toyotabump...
If you're interested in getting them and saving a 10% off!!! check out their site and use coupon code "Robgets10"
MotivX Tools 1/2 inch socket set amzn.to/2kJrs9E
Here's ALL my Amazon tested products:
www.amazon.com...
********************************************
Follow me on instagram for sneak previews and info I don't put up on TH-cam @_RobDaman
********************************************
items used to produce this video:
Samsung S10+ amzn.to/2Uy9tj4
DJI Osmo Pocket get it at amazon amzn.to/2ED2pNR
get it from DJI direct! click.dji.com/...
Other stuff I use...
Sony A7iii camera amzn.to/2p1J8f2
Tamron 28-75 2.8 lens amzn.to/2x6MhOF
DJI Ronin S gimbal amzn.to/2CIjIwO
smooth q mobile phone stabilizer amzn.to/2vuX5Ho
Samsung 64gb microsd amzn.to/2CuKxkf
Takstar boom microphone amzn.to/2q7SbfC
Blackvue DR900S-2CH amzn.to/2PJ2thi
Blackvue B-124 Power Magic Ultra Battery amzn.to/2MVrLKJ
Blackvue Genuine Coaxial Cable Rear 10m for Hardshell installs amzn.to/2MWUyhN
Blendmount Mirror Mount amzn.to/2wh0Kba
Samsung 128gb Endurance microSD amzn.to/2yYTm5B
______________
Disclaimer:
Due to factors beyond the control of Rob Daman, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Rob Daman.
#bajadesigns #ledfoglights #bestfoglights
#anytimebackupcamera
#tacoma #toyota #quicksand #robdaman #robdman #coopertires#stmaxx#volkracing#quicksand#trdbro#trdpro#tacoma#quicksand#truck#goexplore#getoutdoors#offroading#wheeling#overlanding#mallcrawler#trdoffroad#Tacomaworld#toyotatruck#toyotalove#toyotatacoma#bajadesignsofficial#TacomaBeast#TCMBST#te37x #raysmsc #sema2019
Installed this same kit on my son’s 2005 Tacoma 4x4 access cab. He is running the 3.5” Durobumps. You definitely want to trim off any excess thread on the u-bolts down to 1/2”. When you bottom out the bumps that extra thread will contact the frame, it hurts your spine….:). I chose their shortest u-bolt option 7.75” (standard) on stock springs with a 1” block I got from Toytec. With this setup the u-bolt length was perfect, no trimming with about 1/2” of thread showing. The Durobumps are a progressive bump stop. The first 1 3/4 inches is very soft then it gets much more dense and firmer.
Great video. Didn’t realize this was so simple to do. I bought Durobumps to go with my lift kit but didn’t think about the U bolts. My first time off-road with my truck, guess what hung up… my factory Ubolt bracket. Will be ordering these. Thanks for the tip.
Glad it helped
Good video seems to have answered all my questions. Mine just showed up today, and wait.
Glad I could help!
Nice job! I would also mark a torque line on the nut and bolt.
good suggestion
Awesome mod man. Thanks for sharing Rob 🤙
Thanks for watching 🤜🤛
Good stuff brotha. Definitely on my list
Thanks for watching 🤜🤛
Great vid! May do this for my taco
thanks for watching
Your DIY vids always coming in clutch. Switching out my Timbrens to Archive in the coming weeks. Thanks always Rob! P.S. I will be removing the tires prior haha!
smart move
Please do a review after a few offroad trips.
Good job brother 😁👍
thanks for your support
I just order the U bolt, I didn’t get the standard size one, but instead I got the 8.85” since I will be adding the Dakar leaf springs as well on my 2016 Tacoma.
right on!
Rob, maybe use some red lock tight so you won’t have to keep checking the torque!
And maybe you might want to cut the ends of the u bolts because when those bump stops get compressed all the way you’re going to run into some bad problems you can snap the you bolts or bend them, I seen it happen on those flip kits!! Lol
Just a suggestion....👍🏽👍🏽👍🏽
Great vids tho ..keep them coming 😎
thanks for the tips. I haven't seen any suggestions to use loctite. I speculate it's due to the u bolts naturally stretching.
NO! WET TORQUE AND DRY TORQUE ARE DIFFERENT! Bolts are torque to yield (TTY) in most cases and you don't want to roll the dice on the drivetrain. Not saying there isn't a way to do it, but run numbers and compare torque figures first.
U bolts are not a set it and forget it thing just because u used loctite. It is highly recommended to do the retorques. With the proper tools like torque adapters it only takes minutes to accomplish. I fix helicopters for a living and im always doing retorques. U can also use torque stripe to mark ur hardware to see if your hardware has turned between intervals.
Thanks for the discount code just place the order....
No problem!!
Rob. Look into getting either a set of crows feet or some torque adapters on amazon. Makes torquing hardware in odd places much easier. Im looking at getting that same flip kit
Definitely on my list
Definitely a useful mod! Wondering about the length of the screws that hold the bump stops, with the thicker metal, shouldn’t they be a tad longer?
Yes they should be.
Nice mod
Have the same setup. They definitely make a difference. Did you use loctite?
nice. No loctite. I haven't seen any recommendations do that. I speculate it's due to the u bolts stretching.
@@RobDaman Are you lactating?
possibly
That’s a brilliant idea. What a great modification for Toyota owners.
no thread locker?
I can’t find a kit for my 2018 ZR2.
Any ideas?
I need to install bump stops anyway.
When I installed my Alcan springs I ordered a 9in set thinking I would need longer bolts and I ended cutting most of it off! Now that I am ready for the flip kit I would like to have the correct length to start with! I am leaning toward 7.75in but maybe I should do the 8.85in and cut them down again? The length Ubolt you purchased was what please?
Definitely go longer and trim. It's been a while and I actually forgot.
What size Bumps you get ? 4.25” or 5.25” ? And what’s the gap in between the Top of the Bumpstop and where it hits the part of the frame ?
Mine are 4.25"
I changed my leaf pack and have a lighter load (no hardshell and CargoGlide is lighter than Decked) so it's about 2 inches. (eye balled not measured)
Just and observation, that exhaust dump....how well is it working on heating up your brake line and spare tire?
I know why you chopped it, but I would have at least re-routed the pipe or left it a little longer so it isn’t dumping directly over your brake line and heating up that spare tire, not to mention, heating up that axle as well.
Just my .02, it’s your truck, you do as you please.
Thanks for your concern.
I just drove 21 miles in stop and go traffic. When I got home, I touched everything bare handed but it wasn't any warmer than any other areas mentioned. Pipe is pretty far from those items. I'd be happy to do a video of it if you could fund the tools to measure temperatures of the aforementioned areas.
here's the vid of me cutting it: th-cam.com/video/3SEhcdDcR2w/w-d-xo.html There's a few angles that you may be able to see the clearance.
Again thanks for concerns.
what kinda muffler is that is it copper?
it's the stock muffler but cut for clearance. It's stainless steel I believe.
Here's the video of the chop
th-cam.com/video/3SEhcdDcR2w/w-d-xo.html
What size UBolt flip kit you running 8.85” or 9.4” ?
This is the 8.85 if I recall. Durobumps has a good tutorial on how to measure what you need.
Rob Daman thanks bro🤙🏽
Do those leaf springs allow for more payload weight? Or is it still stock #s
Those are Deavers stage 2 leaf packs for more weight. I yanked my stock+AAL not long ago. I haven't done a suspension update since my UCA's because I may try again to change em.
Rob Daman what made you change from a stock + AAL setup to a deaver pack? About to do my rear end. Been running kings for too long without a lift in the rear.
@@AL20496it couldn't handle the static payload of 400+ lbs so i went pull leaf pack
Hey Rob did you have to do anything special to get your spare tire to fit under there?
A hammer helped but it fit
What length u bolt did you get?
I honestly forgot but durobumps has a article on how to measure it properly. you definitely want longer vs shorter.
Measre from the bottom of your axle to the top of the leaf pack then add 2 inches. If u get em longer than needed you can always cut them to the length u want. I would suggest leaving an inch or two of thread sticking out of the nut.
Hi Rob, Do you know what size the nuts are ? I think they are19mm but not sure from what socket I tried. Thanks
i can't recall if it was a 17,18 or 19. been a while
Hey Rob! Love your reviews! Would you be interested in selling these?
thanks. you mean selling durobumps or another similar product?
@@RobDaman the durobumps and flip kit?
When offroading it's nice to have more clearance. An inch literally makes a difference.
Check out the video and see how.
It's important when you're done to torque them evenly to 93 ft lbs and check them VERY often like 100 miles, 250, 500, 1000 to be safe.
Off Loading what?
Typo. Fixed. Thanks
Now you can bump your U-Bolts into your Frame instead of the Dirt,..I don't like it.
pu81nk. Im curious to know why u think the u bolts are going to hit the frame? Yes Rob could stand to cut about an inch or so off them but with the bump stop he installed there shouldnt be any issues with that.
Not recommended.
Why?
A compete waste of money!
Why?