You need to do a video on removal of the bearing. Most mates are clueless as how to do it. Use a large knife pulled connected to two threaded rods and screw plate with sharpened bolt pushing on end of axle in small hole. Tighten bolt to pull bearing off. After new seal has been put on axle drop bearing down axle shaft and use a long heavy steel pipe and slam it on or press it on with an axle bearing press.
![[FULL EP.73] เปิดบ้าน 70 ล้าน "แป้ง Zbing" ยกมาทั้งญี่ปุ่น l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/YBnJhTt07Pg/mqdefault.jpg)
You need to do a video on removal of the bearing. Most mates are clueless as how to do it. Use a large knife pulled connected to two threaded rods and screw plate with sharpened bolt pushing on end of axle in small hole. Tighten bolt to pull bearing off. After new seal has been put on axle drop bearing down axle shaft and use a long heavy steel pipe and slam it on or press it on with an axle bearing press.
Hi I forgot to ask you
What tools did you use to remove the roller bearings?
Thanks
Greetings Mario
You don t have to remove the rear tires just the wheels, just 6 size 38 mm nuts + conic washers.
How do you go about setting the preload on the two tapered bearing if you were to change the bearings aswell. Thanks in advance
Great video, please show how you Replace the 2 Brake Axle inner and outer oil seals..
@
Hi
Can't you just dismantle the hub where the wheel is screwed to replace the oil seal? Thanks
Greetings Mario
Unfortunately no, I had to use a bearing puller and some heat to get the bearing off the axle so I could change the seal.
@@fixingfordsonsaustralia6632
Thank you very much
Great video
@@fixingfordsonsaustralia6632 Hi. Do you have a photo of the bearing puller?
gzhihhu
Gzhihhu means I haven’t got a clue how to do it!