🇬🇧 Detailed review of Kllisre X99 D8 LGA 2011-3 | CPU Overclocking | Turbo Boost Unlock | Nvidia SLI
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Detailed review of Chinese Kllisre X99 D8 motherboard on Intel LGA 2011-3 socket. Unlocking turbo boost with Intel Xeon E5-2640 V3 and overclocking Intel Core i7-6800k with Intel Xeon E5-1650 V3. Testing different RAM configurations: 16 GB, 32 GB, 64 GB, 128 GB, 160 GB, 224 GB, in single, dual, and quad channel configurations.
Intro: 00:04
Motherboard specification: 00:13
Limited original BIOS: 02:37
Turbo Boost Unlock issue: 04:50
VRM thermal test: 07:36
Testing and unlocking turbo boost of Xeon E5-2640 V3: 10:28
Testing and overclocking Xeon E5-1650 V3: 12:01
Testing and overclocking Core i7-6800k: 13:07
Testing features and ports: 07:17, 14:26
Dual GTX 1080 Nvidia SLI test: 15:31
Verdict: 16:56
Alternatives: 20:19
Turbo Boost unlock step by step guide: • 🇬🇧 Xeon E5-2600 V3 Tur...
Detailed review of Huananzhi X99-TF: • 🇬🇧 E5-2640 V3 Turbo Un...
Detailed review of Huananzhi X99-F8: • 🇬🇧 Detailed review of ...
Detailed review of Huananzhi X99-8M: • 🇬🇧 Detailed Review of ...
Original BIOS: www.miyconst.co...
Geekbench 5 and Userbenchmark results:
browser.geekbe...
browser.geekbe...
www.userbenchm...
www.userbenchm...
The motherboard was bought here: www.aliexpress...
Use the following AliExpress links to support my channel:
Huananzhi X99-TF: s.click.aliexpr...
Huananzhi X99-F8: s.click.aliexpr...
Huananzhi X99-8M: s.click.aliexpr...
Kllisre X99 D8: s.click.aliexpr...
KingDian SSD: s.click.aliexpr...
My blog: miyconst.githu...
Music: www.audiomicro...
I bought one and paired it with a e5 2620v3 , the motherboard is good and works well. thanks for all the tools and info
I gotta say, your channel is a godsend, Miyconst! I've been looking to make a virtualization environment with Proxmox and your detailed review of the motherboard has made my mind on it. I don't think that I'll be overclocking the CPU (plannning on a E5-2678v3), so it seems to be solid enough for running 24/7.
Now if you have any kind of heatsink recommendations, I'd gladly hear it since I'm worried about the heat dispersion with this processor.
Again, thanks for the review and keep up with such amazing content!
Edit:
Any links to some good ECC RAM are welcome as well!
E5-2678 V3 is not a very hot CPU, any decent cooler, for example Cooler Master Hyper 212 Evo will do the job just fine. For ECC REG memories, I need to know your location, otherwise my recommendations will be irrelevant. In general, Samsung DDR4-2133/2400 ECC REG modules are the best.
I'm gonna make sure to use your links when i'll buy the stuff, and i'm gonna share with my friends, thanks for the help man.
Please always pick the best priced item from the most reputable seller on AliExpress. You can use my links to navigate to AliExpress, but if the link leads to a not reputable seller or an overpriced product - don't buy it. AliExpress affiliate program limits my abilities very much, I cannot link sellers and products I want, I can only link what AliExpress allows me to link.
Nice review, I really liked my x79 plexhd but recently switched to ryzen build. I hope to do some more xeon reviews in the future though!
As soon as Chinese will make something interesting - I will review it. For now, I have finished almost all their interesting boards.
A little virtualization test would be perfect. Try proxmox as it's very easy to setup within minutes. You Can then try to associate a full Sata pcie controler to a vm to ensure full VT instructions support.
Yeah, I already have it planned, but not sure when I will have time for it.
nice review , thanks
What does it mean that LAN "works" did you tried to send big files (20GB at least) between 2 PCs to stress controller?
Other than that, great review, as always, hope you get at least 10K subs.
No, maximum files size I send over the network was 1GB. I will test 20GB or bigger file and let you know.
@@Miyconst In my experience .iso files are best to stress LAN on both sides (plus M2/SATA controllers as well).
Which BIOS can i use for the Huananzhi BD3?? ( Hack Turboboost) (in app mi899)
Thanks for all your work. Will PWM fans work ok, given only one temperature sensor works? Or just use 3 pin fans?
PWM fans connected to the CPU fan header work well.
Great analysis! I am very inclined to buy is board for the price she finds herself , to use it with the Xeon 2640v3, (for games) but I have some doubts. 1. VRM heats up a lot? To the point of causing throttling cpu? She will accept RAM ddr4 not ECC. (For common desktop). 3. LAN Port is gigabyte? Thanks for the attention!
Hi. Here are some answers for your questions: 1. VRM heats up with E5-1650 V3 when overclocked, works fine with E5-2600 CPUs. 2. The motherboard works with regular DDR4 and DDR4 ECC REG, it means that with Xeon E5 processors you can use ANY RAM, with Core i7 processors you can use only regular RAM. 3. LAN port is advertised as a gigabit ethernet, but I didn't test the speed myself.
@@Miyconst Thank you friend for the answers were very helpful. Thank you friend for the answers were very helpful. I found this MOBO very interesting, to get a bargain for my country (Brazil), I intend to buy one, by the dissipation of the VRM being passive, I will use use with 2640v3. I found this MOBO very interesting, to get a bargain for my country (Brazil), I intend to buy one, by the dissipation of the VRM being passive, I will use use with 2640v3. Will it be board will be able to suit me well or only one MOBO Huanan F8 would be complete. Did you mention about the BIOS exchange, for the Huanan F8 model and with that released the "turbo boost" and the board was stable, has any tutorial on how to do?
@@arthuralmiro I have step by step guide of how to unlock turbo boost: th-cam.com/video/VkwEvATIgW0/w-d-xo.html
Kllisre X99 D8 works stable with BIOS from Huananzhi X99-F8.
Nice vídeo. Just one question. I will be able to flush the huananzhi BIOS with the FTP Tool after i remove the BIOS lock, without breaking my motherboard?
Yes, X99-F8 BIOS is compatible with JingSha X99 D8, but beware that Chinese may change the motherboard without any notice and if that happens, your motherboard might be incompatible.
Hello, I am delighted with your videos, I just purchased a kllisre x99 f4 chip C612 board, could you give me some information or a video to turbo boost said board. all the best
This video has all the info you need: th-cam.com/video/IsgBQ0ZMxYY/w-d-xo.htmlsi=8mBKF65I64XDMtw1
I messaged the official killsire store they forgot to photoshop the jingsha logo on the overview photo on aliexpress looking forward to their response xD
😄, it's the same motherboard after all, just two brands are selling it.
I'm missing a link to the USB flasher in the description :/
Nice overview, thanks for the information!
I am using such one: www.amazon.de/s?k=ch341a
@@Miyconst thanks a lot! :)
I love your E5/X99 videos^^
Great video, one question does the motherboard support pcie bifurcation?
It does, but I don't recommend this motherboard because their quality degraded a lot after I published the video.
Keep stock D8 bios and forget overclocking. It should run cool and reliable...
PS, as an idea of what to look at, I'd love you to recommend a small FF / low power offering with the intel AES instruction set for PF sense or others.
I don't think I understand what you mean, sorry :).
Is there any way for M2 wifi to work on this card? Because I installed an M2 wifi (intel 9560) and the card did not recognize !!!
The WiFi slot itself works, but there are compatibility issues.
Hello, il supposed to buy this motherboard kllisrer d8 or huanchi x99 d8 with e5 2620 v3 . I have doubts with memory. Can I install memory with 2400 MHz, 2600mhz 3000mhz ‽ Are they compatible with e5 2620 v3or needed overclocking or limited to 1866 MHz because of the processeur‽ Thank you
DDR4-2400/2600/3000 will work, but the maximum memory speed with E5-2620 V3 will be DDR4-1866, this is the CPU limitation and nothing you can do about it.
@@Miyconst hello, thank you for answer. Let me tell you that your tests are really impressive, really good, taking account elements that many tests do not integrate in their tests. It is real pleasure to watch and listen. I'm agree with you as to the memory.
In other words and in response to your mail s and test if Chinese motherboard: Altermiter X 99 z99 = Plex HD, so they are not good. However, if I understood, the best value are: killrise x99 d8 and huanchi x99 f8 as for the Chinese motherboards x99. The idea is to buy one of the two motherboards ( I prefer with three slots pcie 16x.. in case I need to replace my broken ethernet port, or usb 3.2...and so on ) the xeon i5 2620v3 and memory of 2400-2600mhz ( although memory is limited to 1866). So, with turbo boast and overclocking. If in one year or two, I feel I need a better processor, for instance i5 2680v3 or v4, I shall not replace the memory I bought for the e5 2620v3. I will use the e5 2620 v3 for playing and photos ( dxo optics program and decompress big files ( 13go, 15gi, 20 go). As to the killsre x99 d8, it seems is more complicated to flash bios with huanchi x99 f8's bios ( I'm not an expert). Is my explaining a reasonable choice ‽ Thank you
@@ulises3113 Overall Huananzhi X99-F8 is a better board. It feels to be of a better quality, has a decent BIOS out of the box, has no issues to flash modified BIOS, and has two M.2 Slots. So, Kllisre X99 D8 makes sense if it's $15-20 cheaper than Huananzhi X99-F8.
It doesn't describe the Chipset on CPU-Z on this video? Do you know what chipset is it? B85 or C612?
@Miyconst
If we add 4x8gb ddr4 ram sticks what speed will it run
Will it run 2133mhz out of the box
It depends on which CPU and which RAM you use.
Great video
Ok I have an error, everything is working fine but sometimes while doing whatever more in gaming the screen and audio freeze after that the monitor goes black and the pc still on but not signal, do you know what is the problem? Bad can you tell me where can I find the CPU MC driver for delete it just in case? I really need help bro, sorry for bother you but this is killing me, buy a new pc, build the pc and pum this error, I can't do nothing xd
подскажите как на этой плате включить автозапуск при подаче питания? пункта похожего на "Restore on AC / Power Loss" не нашел на ней....
Наскільки я пам'ятаю, цього пункту в оригінальному БІОС немає.
hi i have a kllisre D8, i can't install a sapphire r9 280x toxic it gives me black screen. While with an old HD 2600 Pro it works great. What can I do?
Hi, really liked your review and off the back bought a 32GB E5 2678 v3 DDR4, AMD RX580 8GB machine. At the moment I have a half TB NVME SSD which is almost out of space!! the question I have for you is ... If I add a NVME to PCI adaptor card, and an additional 1TB drive on that card, will it be visible and are there seperate PCI channels brought out from the Xeon or are the channels on a switch. thanks
Xeon E5 CPUs have 40 PCI-E lanes, and the slots on the motherboard are connected to their own lanes, they are not shared, thus you can add an expansion card with an extra PCI-E NVMe SSD.
but after all, but is it the best kllisre or huananzin x99 f8 ??? Your content is exceptional, continue with excellent work
These two boards are about the same, get the one which is cheaper.
Thanks for the review. I'm trying to set up wake on lan in bios, but I didn't find it. Does wake on lan is available on this motherboard (X99 D8) ? And how to activate it ?
Sorry, I am not sure if this feature is available and how to set it up on this motherboard.
I'm trying to do the same, not had any luck so far. I flashed F8 BIOS & enabled it there, but there's nothing in Windows to tweak & it's not responding to the WOL packets.
Hello miyconst, I am writing to ask you about a problem with this motherboard and it is that I already assembled it but it gives me a problem on the led screen which is the "b0", I don't know what it could be since at first I got the error " b7 "but I solved it by changing the slot ram ... what should I do, please help me :(
Great review! Do you know is VT-d/IOMMU enabled on this motherboard or other X99 boards?
Intel Virtualization is working on this motherboard, at least it worked for me. I have tested Hyper-V under Windows 10 Pro.
@@Miyconst Thanks, but I'm afraid it doesn't tell if VT-d is enabled or not. Hyper-V and other virtualizations only need VT-x which is enabled in most CPUs/Mobos, but for PCI passthrough you'll need VT-d support too.
I don't know how to check VT-d support in Windows, but in Linux quite easy, but requires enabling it first. Here's a link how to do it Proxmox (debian-based)
www.reddit.com/r/homelab/comments/b5xpua/the_ultimate_beginners_guide_to_gpu_passthrough/
@@anttikuisma5470 I see what you mean and thank you for another tip to what to test with these Chinese motherboards. It will take me some time to validate if it actually works, but the BIOS has required settings at least: www.miyconst.com/UploadedFiles/kllisre-x99-d8/kllisre-x99-d8-vt-d-00.jpg www.miyconst.com/UploadedFiles/kllisre-x99-d8/kllisre-x99-d8-vt-d-01.jpg
Hi friend. I have this mother board running with a TBU Bios from huanan f8. When i turn off system, mouse led not turn off. Do you know how i can solve this problem? Thanks
I am not sure what to suggest in the current situation. The issue might be with the mouse itself. You can try to use other USB ports.
On ali express link item description, it says the mobo runs dual channel. Why do u say quad channel????
Which motherboard are you talking about? JingSha X99 D8 has 8 memory slots, it's physically impossible to fit all of them into two memory channels.
Do someone know that G.Skill Ripjaws V is compatibility with this motherboard?
Most likely it is supported.
Hi
I have this board and recently purchased a 6900K processor. I plugged it in and the computer turns on but there is a black screen. what could be the problem? Could it be that the bios is not updated? Is there a bios you recommend installing?
Thanks
Hi. With such problem description it's next to impossible to suggest something. Please join my discord and provide full specs of the setup with pictures.
Hi Miyconst, thank you for the hard work!
I have a couple of questions:
1- Does the RAM in this kind of motherboards has to be server RAM (ECC)? Can I use regular RAM? Is ECC RAM fine or should I go for non-ECC?
2- I've seen that max RAM frequency supported by x99 D8/TF motherboards is 2400MHz, but you use 3200MHz RAM in some videos. Is this because you changed something in the BIOS?
Thank you in advance!
You can use all sorts of memory with JingSha X99-D8, the only requirement is to use one memory type at a time. The memory speed on these boards is limited by the CPU, not by the motherboard. You can install DDR4-4000, but the maximum speed will be limited by the CPU used.
@@Miyconst Thank you very much! Can I use 2400MHz RAM with Xeon E5 2678 V3? I can't find RAM speed specs for this CPU anywhere.
@@jlb2876 you can, but the speed will be limited to DDR4-2133, this CPU has the same DDR4 memory specification as E5-2680 V3.
Hi Kostiantyn, I'l triying to figure out how to disable the leds light with the HUANZHI X99-F8 bios on my Jingsha x99 D8. With the original Bios it was posible. Thank you and I wish you a happy 2022.
I am sorry to say, but I don't think that Huananzhi BIOS has this feature.
@@Miyconst Thanks for the answer anyway, I just bought some RGB RAM (the price was right) and I feel like I have a Christmas tree under my desk. Maybe ther is a Jingsha Bios with turbo unlock and undervolting ?
У мене є питання, чи не продаєте ви материнських плати після відзнятого відео? Та чи можливо взагалі через Вас зробити собі замовлення на материнську плата та процесор разом з анлоком турбобусту? Або відправити материнську плату для анлоку турбобусту?
Доброго дня, Сергій. Через мене можна замовити, також можна відправити для розблокування турбо бусту. Ви можете написати мені на miyconst@gmail.com.
Do you have a step by step flashing BIOS video?
Thank you so much from Colombia?
What kind of BIOS flashing are you looking for? I already have guides how to apply Turbo Boost Unlock hack and how to use CH341a external USB flash programmer.
@@Miyconst I've just found the video, thank you so much!!
@@intolko hi, can you share the video? I dont know how change the bios to X99-F8
@@olhodegatolives46 th-cam.com/video/4qX2zihB6UE/w-d-xo.html
this is not available any more any where on aliexress so i was looking at the HUANANZHI X99 F8, would this one be ok for overclocking the 1650v3. also do you have a recomendation for a cpu cooler
thanks
Yes, Huananzhi X99-F8 will be just fine with E5-1650 V3. For a good CPU cooler you have to look at your local market, I can say that Noctua is good 😁.
i have the same problem with the turbo unlock, can you make a guide and put the best settings for the bios settings?
i dont know wwhere to find that cpu mc driver? i need help, sorry for the problems xd
I'm looking forward to buy the jingsha version of this mobo, to pair it with an e5-2660 v3, samsung reg ecc 16gb ram cl12 2133 (2x8) and a 1660 oc dual fan form pcyes, i will use mainly for school, gaming and some video editing, do you think that i will be fine with that config?
Yes, you will be very fine with this setup.
How to log in to the BIOS which button I tried everything goes to the AB error
It shall be the Delete button.
Hello i don't understand something because in the video you say can't use the FTP tool, but in reading the comments it seems you actually can? I have received a Killsre x99 D8 motherboard and i did not knew about the issue. Can you help me in that regard? Thank you very much!
FPT works with JingSha X99-D8, but you have to disable BIOS write protection in the BIOS settings.
Привіт, мені вона пришла з 2678 вже з розлоченим турбобустом (наскільки я розумію)
Чи є сенс в перепрошивці біоса, і пошуку кращих таймінгів памяті? Який буде теоретичний приріст потужності в іграх?
Вітаю. Подивись на швидкість ЦП в іграх. Якщо частота опускається нижче 3.3 ГГц, тоді є сенс прошити BIOS з пониженням напруги на процесор. Щодо затримок ОЗП, то затягнувши їх можна отримати до 5% додаткової продуктивності.
@@Miyconst 5% не супер показник, при тому шо мені піде не один день шукати робочий конфіг і то все довести до ладу.
Дякую за відповіть. Keep up good job!
hey miycost, can you show how to uninstall cpu mcupdate?
You don't have to do that any more, but if you really want to, you can take a look at my first Turbo Boost Unlock tutorial.
I would like to build a cheap x99 setup. I already have the e5 2620 v3. any recommendations?
How much memory do you have and how much do you need? What is the purpose of the setup? Gaming or server?
I just have the cpu, but I guess 16gb will be enough. Just for some gaming.
@@GabrielCardoso-zr6di then I would suggest Huananzhi X99-8M and two 8 GB stick of the cheapest DDR4 RAM you can find, just try to have identical sticks.
I'll check it out. Thanks man I appreciate.
I just got a Xeon E5 2650 v3. Should I go with X99 F8. I don't wanna overclocking it.
Xeon E5-26XX are locked, it's not possible to overclock these. X99-F8 is a good board, but for an E5-2650 V3 it's an overkill.
Will replacing the heatsink on the VRMs with a new one improve cooling? And could the VRMs be replaced with better ones, using a hot air rework station?
Maybe, but I think it is not worth it, since then you are going to the price range of the branded motherboards.
Great job you're doing. I have one kllisre x99-D8 but my systin tmpin6 and tmpin8 are showing 121.°c (not working) do you know if there is anyway to fix this? Or probably are faulty sensors? My other sensors working fine (cputin tmpin5 and tmpin3).
These sensors are simply missing on the motherboard.
Nice video, i got a question, to flash the bios to the x99-f8 i need to put the x99f8.rom archive in a usb and update the bios through the bios settings?
No, you have to use FPT tool.
14:57 My memories only work in the same slots as the video is in quad channel. The BIOS is factory set. would have some explanation for that. 2640v3 CPU. To use a v4 CPU, should I change the BIOS?
There are 4 memory channels and 8 memory slots, two slots per channel. The first one is the main slot, the second one is working only if the first one is populated. If you have Turbo Boost unlocked BIOS you need to restore it to the full BIOS to use V4 CPUs.
@@MiyconstThank"s!
Hi great review do you know if the cheap gtx 1060 (p106-90) for mining can be used on this platform for 3d rendering?
The motherboard itself does not have any limitations, if the GPU is compatible with your software, you can use it on this motherboard.
Could you do a video of you flashing the bios?
Okay, I put it into my future plans.
@@Miyconst it will help a lot!
It's already available: th-cam.com/video/4qX2zihB6UE/w-d-xo.html
What is best for intel xenon e5 2640 v4
I would go with my standard pick - JingSha X99 D8.
Does this motherboard support auto restore after AC power loss ?
Yes, as far as I know.
Hi, I bought an x99 d8 motherboard and a xeon 2660 v3, when I turned it on for the first time, the turbo boost was already at 3.3ghz on all cores, is this normal?
I believe some sellers/manufacturers have started flashing the turbo boost unlock BIOS' before shipping.
Thanks for the review miyconst. Managed to unlock turbo on my E5 2678 thanks to you. My M.2 Wifi slot doesn't work for AX200 chip, do you know if it'll work if I get a pcie adapter for it? Any suggestions?
As far as I know, these Chinese boards have compatibly problems with many M.2 WiFi adapters. An external pci-e option should work well, but I can't guarantee.
@@Miyconst Thanks for the reply. Keep up the good work man, you're amazing.
Can i use it for intel xenon e5 2640v4
Yes, you can.
The cooling fins 100% same as my Asus x99-aii 🤔
Hello Miyconst, i have a similar motherboard, a X99 D8 of Jingsha, and i have a question, sorry for not being related to the subject of this video. I installed today a SSD NVME (Pioneer APS-SE20Q 1TB) in the NVME PCIe Gen3 x4 slot, but i don't see it in the BIOS screen, nor in the hard drives section, boot or include in the ADVANCED > NVME CONFIGURATION section. Don't know which can be the problem: if the NVME is not compatible, i need to update the motherboard, or there's something i need to do to make it work. Do you know what could be the reason? Thanks.
I am afraid this SSD is not compatible with the motherboard. To be 100% sure you can try an external PCI-E to M.2 adapter and validate the SSD on another motherboard.
@@Miyconst Thank you, i bought a PCI-E to M.2 adapter and also didn't worked. I installed it in another chinese motherboard (Atermiter X99 D4) and also didn't worked. But i thought it will not be conclusive as both of them are similar (chinese boards). Is there a way to know which nmve will work in a specific chinese board? Any forum where people post their experiences with motherboards? Or do you know a nmve that could probably work with a Jingsha X99 D8? Cause it will be difficult to guess it. Thanks in advance.
There is a jingsha version of this with the same name d8. Is it the same?
I have already ordered the JingSha X99 D8 motherboard, and will test it as soon as it comes. Two motherboards look the same, but might not be the same.
Would you recommend Huananzhi X99-TF? My concern is on the CPU sensors, if it is the same as Kllisre x99, then I might not consider it. Thanks.
Which CPU sensor do you talk about? Huananzhi X99-TF, Huananzhi X99-F8, and Kllisre X99 D8 all have working CPU temperature sensor, the motherboard temperature sensor is showing temperature with -20C degrees offset.
hi this mother board D8 is compatible whit cpu E5-2630L v3?
Yes, it is.
Did you had a chance to look under the VRM heatsink of this board and X99-F8? Are they the same hardware?
Sorry, I didn't do that.
Английский на слух не воспринимаю, но я понял, что прошить биос от Huananzni x99 f8 можно только программатором, так? На видео он пытался прошивать с помощью FPT Tool, выскакивали ошибки. Я правильно понял? Программатор у меня есть, попробовал и сделал бакап текущего биоса, но боюсь прошивать, а вдруг сотру биос, а записать не получиться. Кто-нибудь делал, получилось?
BIOS від Huananzhi можна прошити за допомоги FPT, але для цього необхідно вимкнути захист на запис в налаштуваннях BIOS. th-cam.com/video/u__OXCuxM_U/w-d-xo.html
@@Miyconst Уважаемый, мне очень нравится Украинский язык, но я все равно плохо понимаю его. Я знал, что там опция которую нужно отключить, но это видио сбивает с толку, он отключает эту опцию потом прошивает биос и идут ошибки. Если бы это было на русском я бы скорее всего понял о чем идет речь.
somebody knows where I to research manual X99-D8
Unfortunately there is no such manual.
Hi there, the JPWR1 jumper on my motherboard (same like this one) is melting. Do you know what the function of that jumper? For now I just take it off, as far as I know the motherboard is still working without that jumper. Is there any effect if I'm not installing that jumper? Thanks a lot.
That's jumper is supposed to turn the motherboard on when power goes on, but it should not melt. If it melts, there might be a short circuit on the motherboard.
@@Miyconst For now the motherboard still working okay without any jumper connected on any JPWR1 pins.. Will try to check for any short circuit as far as I can.
Btw I've tried your new BIOSes, my Xeon E5 2630L v3 seems working fine with -90mv/-50mv, -100mv/-50mv is not stable. For everyday use, I set it on -80mv/-50mv.
Thanks a lot!
Hi Miyconst! I have one, but when I turn it on, the led shows FF code! Do you have any ideia what can I do to fix it?
Something is connected incorrectly or CPU power is not connected or BIOS is corrupted.
Miyconst I got a simple question, I purchase 2 E5 2673 V3 (they were on sale so why not) this one will work well on this motherboard? I'm worried about the VRM heat and I'm not gonna go crazy like trying to overclocked to max I just want a simple rig for my emulated games PS2 not for hard core games like Cyberpunk 2077
Yes, it should be fine. The VRM is not the best but E5-2673 V3 is also not super demanding.
thank you @@Miyconst
What monitoring software are you using during video games for the overlay? Thanks
It's MSI Afterburner.
do you think this motherboard supports an overclocked i7 6950x of at least 4.1Ghz?
I think it's a gamble. Depends on the quality of your i7. If it requires too much power and voltage to stay at that frequency, it will fail on this board.
Отлично рассказываешь, я почти всё понял без знания английского.
Man please can you help me? I just bought 2 Kllisre X99 D4 and I try tu use a kingston a400 ssd m.2 but they doesn't appear in the bios, what do I have to do? is a BIOS configuration or what are my best options?
Your options are:
1. Replace the SSD with something else.
2. Try to use Huananzhi X99-F8 BIOS.
Unfortunately, it's a known issue, and some of the SSDs are not compatible with this motherboard.
Thanks for video. Kllisre X99 D8 and Jingsha X99 D8 is the same Motherboard?
Hard to say, my JingSha X99 D8 has stuck somewhere in between China & Europe, so I have no idea when I will be able to test it.
Ok, Thank you man. I will look forward to it. Hug from Brazil.
Hello, is any benefit of using F8 bios, when i dont want overclock? I would like just buy ali set of D8+2678v3+32gbddr4quadchannel , and unlock turbo - sounds ok, or missing something important ?
The X99-F8 BIOS can adjust memory timings, the stock D8 BIOS does not have such option. To unlock Turbo Boost you have to flash modified BIOS, thus I don't see why not to use X99-F8 BIOS.
Hello :) I have question: Is this motherboard the same as JINGSHA X99 D8I?
Can I use JingSha X99 D8 from Your Mi899 than BIOS - stock Huananzhi X99-F8, TU FFS -70/50mv for Intel Xeon 2696 V3 ?
Thank U!
I have not tested the JingSha X99-D8I motherboard, thus I can't answer for certain, but from what I know, these two are different motherboards.
@@Miyconst Hmm... :) The Kllisre X99 D8 are the same as JingSha X99-D8 (from your reviews) that "I" JINGSHA X99 D8"I" isn't just only white plastic plate for back of motherboard - USB etc... ?
like the reviews, probably better off with the huanazhi x99-f8 and find a replacement VRM heatsink for that, just to avoid all the fiddling... though i do have a USB programmer...
With mine Mi899 app you can easily flash desired BIOS on these motherboards, fiddling is no longer required.
Windows sleep Mode work in S3 (suspend to ram) mode?
Yes, it works, but only without Turbo Boost Unlock.
does this motherboard support IOMMU ??
It does, with Huananzhi BIOS.
hello myconst i really need to know if ram with 8 memory banks work with this because i read online it does not work
As far as I know, it doesn't. You need 16 banks modules.
Do you optimize ram memory on intel with ryzen dram calculator ? Does it work well ?
No, I don't. I only used it for memory speed and latency benchmarking.
Great review!
Do you know about any chinese motherboard with 3-4 PCIe 3.0 X16 support?
JingSha X99 has three PCI-E X16 slots, but the last one is only connected as X4.
@@Miyconst And is there any way to redistribute the lanes and get x8? Is it bios or CPU specific?
@@marcgiry7815 yes, you can disable the M.2 slot and dedicate 8 PCI-E lanes to the last PCI-E X16 slot.
Hi. Where do I get an overclocking bios? Thanks!
Get the Huananzhi X99-F8 BIOS from my website: www.miyconst.com/Blog/View/2082/original-bios-for-chinese-x99-motherboards
Could you indicate a link (aliexpress) from a wifi card to this motherboard ??
Sorry, I can't. I don't know which one is good and which one would work.
Do you know if any of these boards support bifurcation of the x16 slots into x4/x4/x4/x4 or x8/x8? This would allow using a cheap quad NVMe adapter in one and a GPU in the other. It would be a very welcome feature but a lot of name brand consumer motherboards leave it it out despite workstations from Dell, HP, etc, including it.
Hi Emma. As far as I can tell - yes. I tested connecting two GPUs & a single NVMe adapter. All Xeon E5 V3 CPUs have 40 PCI-E lanes, thus it's not even required to reduce the number of PCI-E lanes per slot, even though it's possible to do that via BIOS settings. In my case two GPUs worked as PCI-E x16, and the NVMe adapter worked as PCI-E x4 for total of 36 PCI-E lanes occupied.
@@Miyconst I'd actually be interested in using an add-in card like the ASUS Hyper M.2 x16 or the Dell Ultra-Speed Drive Quad NVMe, both of which take four PCIe x4 devices and put them into a single PCIe x16 slot. These options require the BIOS to support mapping the x16 slot into x4/x4/x4/x4 instead. There are cards with multiplexer chips on them that don't require splitting the slot in the BIOS, but attaching the four NVMe drives directly to the CPU is vastly preferable (and definitely cheaper).
@@EmmaBroadleaf Okay, I will try to get my hands on one of such cards and check if it works on the Chinese X99 boards.
So, in summary, should I flash f8 bios with removed microcode to get turbo unlock? As far as I understand, I will have only one chance to flash anything, as the second time will brick the motherboard... Is it correct? I don't have external bios writer...
That's not correct. You can flash your BIOS as many times as you want, as long as you don't brick the motherboard, if you do brick, then an external USB flash programmer will be needed.
Take a look at mine Mi899 app, it will help you flashing the BIOS.
@@Miyconst thank you for your reply. In the video, you flashed full version of f8 and after that, you flashed turbo unlock f8 version and then this last flash bricked the board. Anyway, I will use your excellent mi899 software and flash f8 with turbo unlocked version. Is this the correct way to unlock turbo boost in this board? Thank you once again.
Excellent video !! Can I unlock turbo booster on xeon e5 2620 v3? Thanks.
Yes, you can.
@@Miyconst Thanks!! And in that simpler version that only has 4 ram slots? This one: a.aliexpress.com/_dSKgT1H
Avx instructions are not well supported?
How to fix this issue? Anyone has any idea?
You have to describe the problem better. What exactly and how does not work?
Hello and happy new year!!!! I have Jingsha x99-d8 motherboard, i flash it with huananzhi bios x99-tf to unlock overclock but it's supported by my xeon e5 2620 v3 cpu - Could you kindly tell me which kind of i7 cpu support that motherboard ? There are so confusing informations through internet. I know it's compatible with Haswell-e microarchitecture (is 5960x compatible ?) because cpuz software tells me that but what about Broadwell-e microarchitecture (as your 6800k you provided) ? Many thanks in advance!!!!! :D
This motherboard works with all i7-5XXX and i7-6XXX CPUs, but if you install a CPU with 28 PCI-E lanes, you have to use the second PCI-E X16 slot for the GPU.
@@Miyconst thank you for your fast reply! I appreciate that. I learn from your video this difference of "pcie lanes" so i probably try to buy the cheapest between 5960x and 6950x or the expensive 4669 v4. Hope it will work with that troubling motherboard 😅 you deserve a donation, give me your paypal
Thank you for the support. My PayPal is miyconst@gmail.com
Hi Kostiantyn, first at all thank you all you are doing for the community, its just great. I just bougt a JINGSHA X99 D8 motherboard with an E5 2678 v3 with the intention to make a hackintosh for audio production. For the moment I'm facing a problem relative to the MSR 0xE2. I have to unlock it and I cannot disable CFG-Lock in the BIOS because the option doesn't exist. So my first question is what Bios will be the best for this motherboard ? Do you know if a bios from Huananzhi have this option ? Thank you for your time
Find it, it's call MSR Lock control in x99 D8. But I still want to know what Bios will be the best for this motherboard ?
I would recommend the BIOS from iEngineer for Huananzhi X99-F8, but prepare a CH341A before flashing this BIOS, in case something goes wrong.
@@Miyconst Thanks to you, and happy new year! For the moment I think I won't tempt the devil! I managed to install MACOS on it and it works fine except for the USB3. I can't configure it correctly in the BIOS, because I have the impression that the USB ports are not powered enough. Some options like USB Precondition, USB XHCI S755 WA, USB XHCI Interrupt Remap WA, could you help me to configure them correctly? Thanks
@@gregoiresamsa5573 Sadly, I can't really help with the USB issue, as I have no clue what is wrong there. I have also tried macOS with JingSha X99-D8 using OpenCore, in my case USB ports (2.0 & 3.0) worked just fine after I set the following values to "Enable" in the BIOS: "Advanced -> USB Configuration -> XHCI Hand-off" and "Advanced -> USB Configuration -> EHCI Hand-off".
@@Miyconst That's great, but how did you do it? I tried it myself first with Opencore and I couldn't even boot my disk with High Sierra. Do you mind telling me more about your installation? I've been struggling too much for at least a week now.
will this work the I7-5960x
Yes, it will.
Hello, i'm looking to make a gaming pc with intel xeon, still not decided on the processor, it will surely be one of these
1. Intel Xeon E5-2620 V3 @ 3.2 GHz.
2. Intel Xeon E5-2640 V3 @ 3.4 GHz.
3. Intel Xeon E5-2650 V3 @ 3.0 GHz.
4. Intel Xeon E5-2678 V3 @ 3.3 GHz.
5. Intel Xeon E5-1650 V3 @ 4.3 GHz.
What gpus does it support?
Does it support all the new ones?
Kllisre / JingSha X99 D8 can definitely support up to 256 GB of RAM, and it also support all the CPUs you have listed.
@@Miyconst Thanks a lot! Thinking to pair it with a Geforce 1660 Super OC 6gb GDDR6.
Hi Miyconst thanks for review. I have one but I need know if this motherboard work with 64GB with default bios or I need update the bios to works
By 64 GB, do you mean 64 GB memory modules or 64 GB in total? With the default BIOS I had mixed experience, for example 8 * 8 GB SK Hynix modules worked, but 8 * 8 GB Micron didn't work. Replacing the BIOS with the Huananzhi X99-F8 solved the issue.
@Miyconst Thanks for the reply. I bought the kit with 32GB 4x8GB KLLISRE and I intend to buy more 2x16GB KLLISRE in the future I will complete 128GB.
Make sure to install your memory with 16 GB per memory channel. It means that all 8 GB sticks should be on one side of the CPU, and the 16 GB sticks on the other side, and there shall be an empty slot in between the 16 GB modules.
Very good channel, thanks for your videos. I have one problem with this Kllisre X99 D8. It´s the first time i´ve mounted this board and when I turn on the computer, just when Windows logo appears, then it makes 4 or 5 reboots!! and then the Windows startup recovery menu appears, and after that I can enter well, and it does not fail while I'm working. The problem is if I suspend, reboot or shutdown. I always have the same problem when turning on. I do not know what I can do. Is it possible that they are the ram memory? I also bought 2x8gb ram kllisre 2400mhz and xeon 2620 v3. Please, I would appreciate if you could give me any advice?
Yes, it could be related to the memory. Validate your memory with Memtest86. Also, do you have Turbo Unlock applied?
@@Miyconst thank you very much for the help. I have passed the memtest and everything ok without problem and 0 errors. I have not done the turbo unlock. What could i do now? Thanks again
Do you think it would be a good idea to put the original bios from your website in the board? (firstly i would have to learn how to do it)
@@daniels7220 now you have to stress test your CPU & GPU, this way you will figure out which component causes the crashes.
@@Miyconst Ok, I,ve done the stress test in CPU. With "prime95" and CPU-Z. It´s ok I think, but I have a question. How is it possible in CPU-Z appears 3191Mhz with a xeon 2620 v3, if the base frequency is supposed to be 2400Mhz?
sorry if i write something incoherent. My knowledge is very limited in this, and it´s the first time i do it!
This is the score, if you want to take a look:
valid.x86.fr/6czwvr
Is this overclocked?? i don´t have done anything!
Any idea on how the X99-D4 perform? Does it have big issues on "normal" usage? No OC, Standard Boost, only VMs?
I am working on the detailed video review of X99 D4, but will tell you in advance, that everything said about X99 D8 can be applied to X99 D4. Basically, X99 D4 is a copy of Huananzhi X99-8M, no major issues found, works with Huananzhi BIOS, possible to overclock & unlock turbo boost. How it's gonna behave in the long run - nobody knows, since the board has just been released, but during the short testing it was behaving very well.
@@Miyconst I'm worried about VRMs, proper chips are like 1 dollar more. No idea why they still use that crappy stuff!
My plan is to try the cheap kit, that is better than my i5-750. I hope that aliexpress will refound me if I receive a DEAD board.
I've seen some RU videos with details on VRMs, could you do something similar?
Or a basic recap of all the differences?
Hello, I have a question regarding XMP (or similar function) for the BIOS of the Kllisre x99 KEN53-813B-4N and the turbo boost: are they available at all for this model of the motherboard, and if so can the BIOS be upgraded any other way but with the usage of a programmator? Thanks in advance, tho I doubt I'll get a reply.
Hello there. I cannot identify your motherboard by this model name, this thus I can't help you, but you can join my discord and send pictures there.
@@Miyconst Thanks for the reply, I really didn't expect to receive any feedback especially this soon.
Regarding Discord and photos - currently the system is being used quite actively, so I won't be able to in the nearest time. However I've looked through my saved pages on this motherboard I've made back when I was building my PC plus googled it's number from above and looked at the page where I was ordering it from. Overall it's the D4 type, as far as I can tell. CPUZ doesn't give any info on the motherboard but the BIOS version - 5.11 dated 20/04/2020 and that it's x99 Mobo.
@@Hirokuro_Asura so, basically it's Kllisre X99-K4? If so, there is a review for this board: th-cam.com/video/3iPQvGxKjG4/w-d-xo.html and th-cam.com/video/H0OzFSGt2Dg/w-d-xo.html compatible BIOS options you can find in my Mi899 application: th-cam.com/video/bO2t790vhg8/w-d-xo.html
@@Miyconst So will I be able to update my BIOS like I did on my older laptops via USB and built in the BIOS update option or I'll have to get programmator, given I decide to tread upon this trail?
@@Hirokuro_Asura please watch the Mi899 video first, but the programmator might be needed.
Is it possible to Turbo Boost an E5-2678 V3 not to the maximum, just a litle bit more than the regular clock??
That's exactly what CPU does itself if you don't apply the Turbo Boost Frequency unlock. It will tubo itself when it sees possible.
@@Miyconst I wanted my regular clock to be like 2.8... not the 2.5 base... but im ok for now... thanks for the nice videos on this matter, you doing a great job!
Hi, i have this motherboard with 8 x 4 GB RAM. I have problem, when i restart windows i have "B7" postcode and i have to remove one of RAM stick and then turn on computer or reset BIOS. I can normally shut down PC and turn it on but reboot (reset) isn't work... With 4 x 4 GB i dont have any problems. Do you know how can i fix it?
You can try BIOS from Huananzhi, it has better memory compatibility.
@@Miyconst i have this bios
Generally its working fine, but when i press reset i have B7 code.
Okay, then I don't really know how to fix it. Did you run Memtest86? I may suggest to try BIOS from iEngineer, but beware that it may brick the motherboard.
Can I go for quad channel ram or I just can dual channel?
Minimum is one memory stick or a single channel. For the best performance, it's better to have four channels active, but dual channel is also fine.
I should not need 1.320 vcore to run a 4.2mhz OC?
It really depends on how good the CPU is, some require more voltage, others less. For the sake of VRM testing, 1.32 Volts is a good value.