Mark, we do believe you get the most out of each log you saw. The sawing is great when the log is less than desirable. Enjoy the show as we have enjoyed yours. That pile sure looked neat and clean when it was done too.
Hi Mark. As I told Ed. This Friday's eve log is much better. Yes. I know it's pallet grade. I did a lot of pallet construction. Companies in Vermont & Upstate N.Y threw them out in the late 1980s. As a farmer of 3yrs at that time. Pallets help build animal stalls, doors, & other uses. The Upstate N.Y paper company threw out huge piles of white pine pallets 5 feet by 3 feet, 5 by 4s & 5 by 5s. The boards were 4 quarters. The 5 by 5s were 8 quarters thick! I helped build a lot w/ pallets. ( The white pine pallets were my favorite. Very easy to come apart. The other oak, ash, & popular pallets were challenging to get apart. The oak, ash, & popular pallet were $90.00 then in Vermont. Anyway. We had a few Friday night eve's " booms." 😂😂😂😆😆😆😁😁😁 Say Hi to Ed, ZZ , & Hank. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
Any video is a good video That is the kind of oak I used to take off pallets, sand down, and make knick knacks holders to sell at the flea market. Had a very nice grain.
I sure wish you knew someone with a flat bead and log claw-picker-upper. NE Ohio got slammed this past Tuesday with 75-105 mpg winds & blowing rain. Many big, old trees snapped and uprooted. Hundreds of power poles snapped. Our power was out for over 60 hours. We are all safe except for freezers full of formerly frozen foods. Someone here is getting some terrific timber. Just catching up with YT videos from last 3 daze. Peace brother
Eight o’clock at night them oak boards will last a long time on pallets, been working with a lad who has autism good with his hands show him once and he can do it , building a cattle grid on the job got him tack welding cutting pipe and painting then laying a trailer floor he burnt my drill out so I got a Milwaukee it’s better than maketa it was two years old and crap , friend of mine has a Milwaukee and it’s eleven years old on it’s third set of batteries there not as cheap as maketa but they are if they last longer and two years warranty anyway you guys have a nice day
@@markgalicic7788 lad at the supply store recommended Milwaukee said they have all metal gearbox and an advanced Chuck and I got a free pack of drills , batteries last longer drilling holes lad drilled over three hundred six mil holes I’m impressed with it
Mister Mark I was wondering if you had ever seen a shotgun mill I think that is what it was called the Sawyer road on the carriage there was one in the county where I live my dad had a portable welder and used to fix it sometimes he would pour the babbit bearing for them the Sawyer was a older black man and if I remember correctly he's died everything from the carriage love your videos and you and Eddie and ZZ be safe and have a great day Sam
Hey Mark, you probably already know this but, You and Eddie could use headsets intercom similar to what driver & passenger use on a motorcycle. To definitely impart important or serious info (great safety item), but you could also just shoot the poop. Oh also been watching for a couple yrs from the logging capital of the world British Columbia!!! Lovely little mill you fellas have created 😊
You made my day! You said "Crick" instead of "Creek" (long e), and I thought "I'm not the only one!!". Growing up in Montana, that's what we always called a small, flowing body of water. Pat McManus, and outdoors author wrote a wonderful story about the difference between a crick and a creek. If you can find it, read it. It's hilarious.
I have to ask. Do you guys ever run across locust? It's hard as hell, i know, but can make beautiful flooring that's crazy durable. I'd ask about Osage orange but i know you are too far North for that.
@Keepithonest7 ½" yea I thought they looked purdy thin I didn't think they cut anything much under ¾" but I guess they do, I know your not Mark but thanks for the answer I was curious about it.
@markgalicic7788 ok I was just wondering it looked almost paper thin on the video I can't remember seeing you saw anything that thin before but my eyes are getting bad lately thanks for the reply!
Episode 320 TEXAS FLAG IS CORRECT, TODAY ITS WRONG, WHAT THE HELL? Blue for loyality, white for purity, red for bravery, star for God, one country, standing on two feet.
You go to some show just to get 'Steamed'? Steamed as in mad? While you conveniently got Eddiie and ZZ to do that for you daily? What are you getting steamed at? Or are we talking Turkish Bath steamed, where you 'take a steam' but NOT like a steam thief?
@@garybessey2184 Well it's a horse show too, don't forgo the steamed horsemeat, I go straight to the steamed horsemeat booth when I get there. Their steamed tractor is a bit chewy.
hi mark, you may not have seen my comment from the last vid, i know you're good friends with john clark.... just wondering if you've heard from him. has not posted in several days
Hello , I just talked to John last night and he is doing well he said it's been raining every day there and he hasn't been able to film anything. but thanks for asking.
![[TH] 2024 PMSL SEA Finals D3 | Fall | รู้ผลทีมแชมป์ พร้อมตั๋วสู่ PMGC](http://i.ytimg.com/vi/7NxsN0Ch6vk/mqdefault.jpg)
Mark, we do believe you get the most out of each log you saw. The sawing is great when the log is less than desirable. Enjoy the show as we have enjoyed yours. That pile sure looked neat and clean when it was done too.
thanks Anthony.
This is one of my favorite channels. Thanks for sharing.
The more and louder the politicos screech, the more I appreciate your calm demeanor. Keep up the good work!
thanks Steve.
That log seemed a better year in the end you did a awesome job guys 👍👍👍
thanks CJ
Hi Mark. As I told Ed. This Friday's eve log is much better. Yes. I know it's pallet grade. I did a lot of pallet construction. Companies in Vermont & Upstate N.Y threw them out in the late 1980s. As a farmer of 3yrs at that time. Pallets help build animal stalls, doors, & other uses. The Upstate N.Y paper company threw out huge piles of white pine pallets 5 feet by 3 feet, 5 by 4s & 5 by 5s. The boards were 4 quarters. The 5 by 5s were 8 quarters thick! I helped build a lot w/ pallets. ( The white pine pallets were my favorite. Very easy to come apart. The other oak, ash, & popular pallets were challenging to get apart. The oak, ash, & popular pallet were $90.00 then in Vermont. Anyway. We had a few Friday night eve's " booms." 😂😂😂😆😆😆😁😁😁 Say Hi to Ed, ZZ , & Hank. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
thanks Lawrence yes pallet wood is good for many things such as our slab wood boxes all pine.
I could watch you guys all day sawing logs.🇺🇲
glad you like it.
Beautiful job men! Have a great weekend,
thank you.
As much as I want smell-o-vision [for pine] certainly not for stinky black oak! Have a great time at the Show! 👍👍😎😎👌👌
thanks Greg.
hi there did good . best to all john
thanks John.
The bus motor was grinning about that oak, for sure! Have a wonderful time Steaming this weekend and God Bless ALL yall Markus!!
thanks Lewie , we sure will.
@@markgalicic7788 YESSIR and want some videos of yall getting mobbed, you famous people you!
Have fun at the steam show. Thanks to the crew for another exciting saw video.
thanks Jerry we sure will.
Some of the prettiest wood grain I've ever seen was on pallet slats.
Good luck at eye doctor
thanks Phillip.
Eddys got to be loving those half inch boards, must feel like handling paper compared to the usual cuts
he sure does.
much nicer log. I love the grain of OAK.
thanks Gary.
Good to see you doing what you do best, missing the show though but the 10th is my 83 b-day.
Happy Birthday Arthur!
@@markgalicic7788 Thanks, what happened to the old videos from way back?
I definitely remembered that you needed to pull back the taper lol. Tell ZZ the other good thing with that stuff is that it's finished.
Bill
thanks Bill.
Any video is a good video
That is the kind of oak I used to take off pallets, sand down, and make knick knacks holders to sell at the flea market. Had a very nice grain.
thanks David.
Eddie's beard is coming in nicely. 😊
for sure David.
Greetings from Eagle, Idaho. I hope your air is better than ours.... fires everywhere out west.
we have got lots of rain here over the past week.
Have a good weekend folks!
thanks Alan.
Good to see you and your crew.
thanks Alan.
Nice sawing guys ty 😊 🙏🏿 👍
thanks Richard.
You could almost make a book outta that cut with the wood being so thin.
knotty book.
Hope you gentleman can give us a brief show from the steam show.
Thanks for all you do.😊
we sure will Ronald.
Busy hands make a happy boy
very true.
That log turned out good. When I first saw it roll on to the carriage (Marks lasting his time with that) but no not too bad result.
not to bad Bob.
Hi Mark & Eddies & ZZ Mark & it's is Randy and i like yours video is Cool & Thanks Mark & Eddies & ZZ Mark & Friends Randy
thanks Randy.
Extra Happy Friday Eve!😊🍁🪚🛠🚂👍👍👍👍✌️
thanks Mel.
That's so cool sir
Nice work, men.
thanks Paul.
Thanks
your welcome.
A little quality deep inside that junky log, which is unusual.
I was happy with it for sure.
I sure wish you knew someone with a flat bead and log claw-picker-upper. NE Ohio got slammed this past Tuesday with 75-105 mpg winds & blowing rain. Many big, old trees snapped and uprooted. Hundreds of power poles snapped. Our power was out for over 60 hours. We are all safe except for freezers full of formerly frozen foods. Someone here is getting some terrific timber.
Just catching up with YT videos from last 3 daze. Peace brother
Sweet!
thanks Doug.
Eight o’clock at night them oak boards will last a long time on pallets, been working with a lad who has autism good with his hands show him once and he can do it , building a cattle grid on the job got him tack welding cutting pipe and painting then laying a trailer floor he burnt my drill out so I got a Milwaukee it’s better than maketa it was two years old and crap , friend of mine has a Milwaukee and it’s eleven years old on it’s third set of batteries there not as cheap as maketa but they are if they last longer and two years warranty anyway you guys have a nice day
thanks Alex , my son has all Milwaukee tools they do last longer.
@@markgalicic7788 lad at the supply store recommended Milwaukee said they have all metal gearbox and an advanced Chuck and I got a free pack of drills , batteries last longer drilling holes lad drilled over three hundred six mil holes I’m impressed with it
That’s too nice for pallets
Good video Bus Motor Productions
thanks James.
Looks like Little Donny needs sharpening
just a big cut for a small saw.
Gonna make some more saw dust. 66& wood, 33% sawdust.
Like using a Ferrari to get groceries haha
true Mark.
Mister Mark I was wondering if you had ever seen a shotgun mill I think that is what it was called the Sawyer road on the carriage there was one in the county where I live my dad had a portable welder and used to fix it sometimes he would pour the babbit bearing for them the Sawyer was a older black man and if I remember correctly he's died everything from the carriage love your videos and you and Eddie and ZZ be safe and have a great day Sam
If it smells like a barn ... it's black oak.
for sure Richard.
Looks like you got a fair amount of lumber out of that knarly log
it did produce much more than the last one.
@@markgalicic7788 I like your channel.
Reason being you are all good people
😎
thanks.
Hey Mark, you probably already know this but, You and Eddie could use headsets intercom similar to what driver & passenger use on a motorcycle. To definitely impart important or serious info (great safety item), but you could also just shoot the poop. Oh also been watching for a couple yrs from the logging capital of the world British Columbia!!! Lovely little mill you fellas have created 😊
thank you , not sure how that would work with the noise.
Nice video
thanks Shannon.
Better log .
much better David.
It might have been smelly/stinky, but at least it wasn't complete trash like the previous one.
much better.
👍🙋♀️💕
thanks Sharon.
That oak ain't no joke and as fricknjeep is so fond of saying it is a very unhappy contestant in this pageant.
very true.
hey mark good video how do you count the footage on that pallet wood?
thanks Andruw , we charge per board $2.00 for a 1/2"x6"x8'
How'd the eye Dr appointment go?
great Leroy , my surgery date is Sept 11th.
Praying everything goes great.
I had mine done and greatly improved my vision.
💥💥🍔🍻🐿️
thanks.
A little nicer piece of oak than the last. I know you are making 1/2" x 6" for pallets , but what is the minimum length they will buy? 43"? good video
For pallets at our mill we cut as short as the customer wants 12 “ up to 144”
@@TheWildWestMill Got ya! thanks for the reply
You said they hardly bring in good logs anymore. Do you get most of your logs from tree services?
You made my day! You said "Crick" instead of "Creek" (long e), and I thought "I'm not the only one!!". Growing up in Montana, that's what we always called a small, flowing body of water. Pat McManus, and outdoors author wrote a wonderful story about the difference between a crick and a creek. If you can find it, read it. It's hilarious.
I like it lol!
I have to ask. Do you guys ever run across locust? It's hard as hell, i know, but can make beautiful flooring that's crazy durable.
I'd ask about Osage orange but i know you are too far North for that.
we have sawed both here John very hard.
How thick are you cutting those stallboards?
these are pallet slats 1/2" thick.
Hey love the videos, I run a frick sawmill in central Pennsylvania, Kyle
thank you Kyle , I just subscribed to your channel.
@@markgalicic7788 Thanks!
Need a video from behind you so we can see how you manipulate the log with your joy sticks and other controls
I did a couple of videos like that and people cried about it.
@@markgalicic7788 Where can I find those videos?
Who is the new fella? Seems to fit in ok and has the required beard LOL
that's Mark.
what do you really mean by nasty log
just look at it.
How come you don't lay it down on the first flat side you sawed off?
I want to make a 12' cant first.
How thick are those boards you are sawing off on the video they look paper thin Mark?
@@joeysweet9045 think 🤔 Eddy said 1/2 inch
@Keepithonest7 ½" yea I thought they looked purdy thin I didn't think they cut anything much under ¾" but I guess they do, I know your not Mark but thanks for the answer I was curious about it.
the customer wanted 1/2" x 6" so that's what we sawed.
@markgalicic7788 ok I was just wondering it looked almost paper thin on the video I can't remember seeing you saw anything that thin before but my eyes are getting bad lately thanks for the reply!
Bom trabalho ,amigos,👍🇧🇷🇧🇷🇧🇷
thanks Adonay.
not bad video with the sound off
problem solved George.
😛😛😛😛😛😛❤❤❤❤❤❤👍👍👍👍👍👍👍👍👍
thanks Charles.
Episode 320 TEXAS FLAG IS CORRECT, TODAY ITS WRONG, WHAT THE HELL? Blue for loyality, white for purity, red for bravery, star for God, one country, standing on two feet.
Doug you need a better hobby or better meds
You go to some show just to get 'Steamed'? Steamed as in mad? While you conveniently got Eddiie and ZZ to do that for you daily? What are you getting steamed at? Or are we talking Turkish Bath steamed, where you 'take a steam' but NOT like a steam thief?
I've always thought I'd like to try steamed pike...
@@garybessey2184 Well it's a horse show too, don't forgo the steamed horsemeat, I go straight to the steamed horsemeat booth when I get there. Their steamed tractor is a bit chewy.
hi mark, you may not have seen my comment from the last vid, i know you're good friends with john clark.... just wondering if you've heard from him. has not posted in several days
Hello , I just talked to John last night and he is doing well he said it's been raining every day there and he hasn't been able to film anything. but thanks for asking.
@@markgalicic7788 thanks for the update.... glad to hear all is well...
Why dont you and Eddie use headset with bluetooth so that you can talk with each other?
Я дивуюсся що у вас шпали з дерева 😢
yes that's what they use.
Smells bad but yields a good number of usable pieces so it’s an overall win. You guys always figure it out. Good sawin vid! 🥸👍👀👋👋👋✅
thanks Joe.
YOU HAVE THE TEXAS FLAG UPSIDE DOWN. WHITE SHOULD BE TOUCHING ARIZONA. Red touching Tennessee.
you are wrong Doug
This has already been dealt with several episodes ago