ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Usb ports are good but still not detecting your usb stick? This can be a cause
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2024
- UK Ebay store: www.ebay.co.uk...
US Ebay store: www.ebay.com/u...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
TH-cam Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...
So this is scary. I wrote an email with this exact problem to customer support and am now getting this as a recommendation
i am enjoying NorthridgeFix videos, little bit more for entertainment, but i watch Sorins videos with pure respect to this man.
just wanted to say thanks for all your videos. They do help me and I wanted to make sure you know that I appreciate your knowledge and the way that you present your methods and even your failures. When I started doing electronic repair I would get discouraged by the ones that was not repairable. I think it is important to let the newbies know that not everything is fixable withing a budget that is.
seen this before , When some one plugs in a broken usb device where 5v is shorted to one of the data pins, they are filter coils
Thank for trick & lesson ...today i have this case on lenovo all in one ..same position usb all 6 port ..but i use 2 resistor 47 ohm replace that ..IT Nice Work ..Thank again my teacher
Had this exact problem. Don't have hot air or donor board, so I jumped the open inductor. Voila, USB working. I realize they protection is lowered, but I'm happy it's working. Thank you
Sunteti de milioane tocmai mi-am reparat usb-ul la laptopul meu dupa ce am vazut acest videoclip, de vre-o jumate de an a picat usb-ul cand am conectat o baterie externa cu o mufa cred defecta, nu imi explic cum naiba sa ars cand micro usb-ul de la baterie avea doar 2 pini + si -, oricum nu conteaza nu ma gadisem sa verific rezistorul ala am crezut ca e controlerul si l-am lasat asa, asta seara am vazut videoul dvs am desfacut latopul l-am masurat si....".ba esti nebun " chiar era ars, l-am shimbat si surpriza usb-ul meu merge. Sunteti cel mai tare , am vazut toate videoclipurile ,imi place modul dvs de lucru as putea spune ca e tipic romanesc, sunt doar un amator in electronica dar imi place si am invatat foarte multe de la dvs . Felicitari si multumesc tineti-o tot asa.
Good to have you back. Very interesting problem It really begs the question what really happened
They are common mode chokes or coils not resistors they filter anything that is not the data lines changing
Maybe someone have tried to plug a USB Killer device for some reason.
It would damage much more than just usb data line. Logic board would be dead completely don't you think?
@@Qban220
The defected part should be a common mode choke, which continues really thin wires inside, and in that case thay have worked as fuse :)
If a zapper would have been used it would fry much more then what we have here. Someone probably shorted out the 5v to data by having a lightning charging cable plugged in and plopping around until it touched something metal or fell into a cup of water.
@@kalindimitrov5629 No! try it for your self, It would fry 5v rail as well. It's designed to kill the logic board not just usb communication. Macbook is no exception, more likely it was a defective usb drive or device shorting 5v with data line.
USB killer would have fried the board completely.
Sir you are a genius. Happy to have found your channel.
Hi Sorin,
I found you a week or so ago and watch your videos with amazement.
Are there any videos where you teach the very basics of testing including how to power up circuit boards using programmable power supply, any tips on how to attach leads correctly, what components to check current or voltage ie which components not to touch with a multimeter on Ohms setting, where to connect grounds, your general working setup, etc?
I've watched some videos where you are checking component but there is no overview of what you are doing elsewhere on the board ie checking voltages or current or whatever.
You're clearly a genius. I wish I could learn 1% of what you know. It's simply incredible how you make assumptions (through vast knowledge) of where data, power or current may be going on a board and through which components. Simply incredible! I would love to learn these skills.
Do you have a degree in electronic engineering or are you self-taught over decades?
Thank you, just keep close, more videos has to come related with the beginners part (checking and identifying components)
Many thanks for all your videos... you're a star Sorin!
Very odd indeed, they are coupled common mode noise suppression coils.
Probably killed by a USB killer
yes not resistor
It happened to my machine too. I plugged a TTL adapter on a 12v header, forgot to plug in the level shifter and burned the resistors.
What if the owner has a USB device with power pin shorted to data and plugs it in again - won't that just blow the board again?
Doesn't the fact that both ports failed in the same way strongly suggest a dodgy device plugged into each port in turn?
Won't he just do the same thing again and be convinced Sorin did a bad job...?
hmmm replacing resistorr,, its not sorin style, why no wire
resistor is used to regulate voltage ( necessary for data ) , with wire there will be no drop or the required or predetermined voltage which carry data in binary . i assume .
that is amazing! your right I might have checked them after I had done all else just to be thorough... But wow.. you have the heads up on that one Sorin.. thanks my friend.. good catch..
Happy to see you Sorin
Another great job done, dear Sorin. But take into account that these are inductors, not resistors. In fact, they are there to protect the very sensitive data lines from external "attacks". Please let me know if you are in the need of some model of Apple schematic and boardview. Thanks a lot for your excellent job!.
And...let me make you a question...which one is your hot air station?, it is really FAST!, and it works like a charm!. Thanks in advance.
I've said it before. Sorin is a true genius. And for sure SMC going for a swim could do that
I had this similar problem with a Acer laptop, but this was the hub chip died, the reason was a damaged USB connector, 5V surely turned it bad on a data line ..., i could not fix. Good video, even if a rarely work on Macbooks, that is not in the preferences of peoples around here.
LOL, it always happened to me on small components. 10:41. Thanks Sorin
USB killer for sure.... It storage power from 5v rail , and with some big capacitors and a step up power supply it spits the high voltage to data line.
yes, and those 'resistors' acted like a fuse.
Nea Sorinel I am glad you returned to strength, I hope you have a successful year !
Thanks. Never thought of that.
hi big thank you for the amazing job you did i totally agree with you that no chek resistor. Now I've learned a lot.
by the way looked at battery charging very good product i will buy it but now is sold out
Thank you very much for sharing your knowledge and experience with us. more grateful for the amazing and clear videos
I had this issue in my microphone. It happened because of a fault USB hub that shorted. The short resulted in a power surge to the datalines which then fried the datalines.
Fortunately, there was an ESD protection in the datalines, so it costs 5 cents to fix.
Thank You For Teaching Sir
Thank you so much!
Of the 5 USB ports on the back of my:
Late 2009 Mac Mini 2.53Ghz.
Only ONE has full power and data pass thru.. as when new...
To drive external USB HDDs etc.
TWO USB ports are DEAD! Totally..
Another transmits data but no power...
Last one transmits data but only low power...
For SD/XD card readers and such like, but not external HDDs... keyboards...
I think I have some ideas, now...
Stay tuned...
J.C.
thank you for the tip. As always, one great video !
Thank you for sharing Sorin!!
Excellent, you don't need to explain so much to know where the fault occurs
thank you sir for sharing. This issue helpful to my daily job basis.
Smokes after repair like a boss. :)
Thank you very much for this teaching, but please I'm in Nigeria how can I get the type of your macOS in flash????.
Well done 👍🏻
i'm always watching your video sir... i learned a lot from your videos.. thank u so much.. God bless u always
😍 happy to see you sir
Nice a new update never see this fault.
Thank you
Intresting finding. Good work.
Thank you for the video.
I have a dell inspirion 5577 gaming and its USB acting weirdly.
It detects some USBs and sometimes when I move hard drive or any other devices that connected to it, the devices disconnected and connected again. I wonder if the USB ports malfunction or the USB chips.
Thanks in advance.
Hi i've ask in power supplay but probably you don't goes to this wideo. How you check offer on ebay when you looking for power supplay with the same short circut protection?
You are simply genius sorin
Ha!, I have a machine with the same problem, will check it tomorrow
Found this video as I am trying to repair a friends Macbook Pro Early 2011. Their HDD died and I have fitted a new HDD and when trying to boot from a USB OS Drive to reinstall an OS the USB ports were not recognised. After installing the OS using Internet Recovery the USB Ports were still not working. Tried resetting SMC and NVRAM - no joy. When booting as single user I get this message at the end of the boot process: AppleUSBHostPort::InterruptOccurred: overcurrent detected with port status 0x4000, localSimulatedInterrupts = 0x0
Also getting a USB Ports disabled due to a device drawing too much power when the OS is running and I try to use a USB port. A powered USB Hub does not work either.
Not checked voltage on the 5v lines yet but will do. When testing the resistors do I set the multimeter to Ohms? I can't do Surface Mount repairs - no tools and not sure if it would be worth the cost to get it repaired? Any thoughts?
Great lesson thx Sorin
That's a common mode choke most likely. Very small gauge wire there. If wire at all.
Don't act on the haters, inform the customers and stay tech, I like onnest videos. Roast my favorite manufacturer's, it will teach me and them to better the hardware. This fault was strange indeed.
You should use hot tweezers for those resistors.
Excellent work , thanks for your help and great video!
I've done this exact repair before on that same model, unsure how it happened as the laptop was a trash find, still working 2 years later. :-)
here is my experience, my usb stopped work when i try to control a relay with a microcontroller via usb, somehow it doesnt work, later i realized that is highly possible the EMF from relay possibe burned the resistor, because when i check the emf voltage from relay when I turn it off, it can go 10V, that is definitely too high. thx for pointing out the resistor burn out problem. before i only know dont connect relay to usb straight away without diode protection. now it is a close loop evidence
Always a good teacher
Please Sir I have an MSI GE72 2QF with issues on the USB Ports, one windows 7 everything works fine, but one windows 10 the USB xHCI Compliant Host controller with error code 10 shows up, please sir what could be the issues. The USB Ports will only not work correctly on windows 8 and 10
As usual You have made another Great Video. I enjoy all your videos and I thank You.
Lucky customer finding you to repair his laptop..
I like so much watching your repair videos 😊😊😊
Just Curious: Can I add an internal USB port to my laptop, so I can have a a mouse dongle connected to the inside so is not exposed to the outside bumping? Or maybe a hidden USB drive inside the laptop?
Hi Sorin i have the same problem with a Lenovo but now i can find the problem :)
Great video
I have a specific problem on my HP Probook 470 G5 i7, my USB 2.0, webcam and bluetooth are not working, not detected in device manager. But all USB 3.0 are working fine. What could be a common issue for all thesse three to malfunction, i have tried to find diagram schematics to try and deal myself with it, since i already fixed some thing thanks to you, but this is harder, and i am far away across entire Europe from you. If you could give me a hint, or something, from your experince i would be very much thanfull.
Thanks sir, that's my answer against my question.
Another lesson, thank you sir
Its CrApple. I have a Sony Vaio laptop, and one time I connected a shorted Wifi dongle to one of the USB's.. The USB immediately turned off and Windows tells me that it was detected a high current on the USB port and it was disabled until next restart. My work crap desktop PC just turns off when he detects a short in the USB ports. Amazing.
Me thinks you will get this back soon, if you do not tell them that the usb device they tried to plug in is faulty (shorted) in someway, they have obviously tried it in one socket with no result then moved it other to the second port and killed that too as it suggests by having the exact same signal path resistor open circuit!
Good find
Thank you
Thanks!
Best electronics repair content!!!!
Good day sir my laptop i used seldom and when i get busy i am not use my laptop in 1 year i keep it to my cabinet for almost 1 year with battery inserted. But when i need to using again i plugged the charger but unfortunately it doesn't work no light up sign and not power on. What cause it is? Since it function normally before i keep it for a long time
Hey there, I have lenovo y50-70 and i have damaged my graphics card. my laptop boots fine but does not detects the graphics card. this happend after cleaning the thermal paste.
thnks soooo much. u saved my usb bro. ur n1
Excellent work ,but if the "D- and gnd" has a 62 ohm between it
interesting video ! what would they have plugged in to kill the resistor ? or maybe faulty apple components ? odd that both failed on the same side ? maybe one popped, then they used the other port till that also failed ??
Where can I order a few of them?
That is why there are mandatory basic tests to do before returning a fixed computer to a customer. You test keyboard, USBs, Wifi, sound, webcam, touchpad. If you do those tests, you know for sure that USB is working when you return the computer to the customer. If he comes back 3 months later, sorry but we have tested your USBs and they were working fine. If you don't test, you will never know if it is your fault or customer's fault.
Yes you have reason
I am learning a lot from watching your videos.
Thank you very much.
I would like to ask you one question.
I have a hp probook 450 g3. The left USB port is not recognized.
One recognizes. The other is not recognized.
The voltage is 5V.
However, there will be a short on the deira line + voltage. A short circuit occurs as a result of energizing the ground part and positive voltage.
Please advise where to check.
good catch but i think that is tow choke coil any way good job sir :)
Good job; thank you for sharing. Subscribed!
btw what is the purpose of the resistor? is it a voltage divider or just a limiting current
THANKS
GREAT JOB SIR THANK YOU
interesting fix
How to fix a laptop that: turns on, nothing on screen, no backlight, no beeps, fans spinning, no image on external monitor, graphic card is fine for sure, PC doesnt boot from hard drive but it can flash crysis bios image from USB drive. I have two laptops like that. Both have same described above symptoms, both died same way. One is Alienware m17xr2, the other is Lenovo g780. Please share Your knowledge. I watched a lot of videos and still dont know how to bite it. Its totally different than finding a dead mosfet on power line.
even me i met 1 macbook with this problem...it didnt come to my mind about these resistor.. but they were gone
Good job man
Some older usb drives came with drivers you had to manually load because they were not yet compiled within the Windows install disks or externally, where the OS could reach out to its updated driver library to download and install it upon demand. Some of these aren't compiled after they have become defunct and or regarded as obsolete.
It seems like 5v varistor
I have one of those novelty USB wrist straps that is no longer being recognized by the Desktop.
Everything else is being recognized.
Any ideas on what the problem might be?
Isnt that in fact two filters constructed in one asembly?
I real loved this one my sony car radio will be fixed today
Sorin, can accidentally choosing "reverse charging" (e. g. cell phone) cause this?
hello friend ,, good video i have to check that resistor
i have problem with my MBP 2012 i5 , on mac os x yosemite 1 usb port work 2 usb port not work
here is the my problem i'm unable to install El Capitan , error cpu panic kernel , I can install sierra high sierra , mojave even catalina latest edition , there my problem start
current mac os x is mojave with latest update , MBP work fine except usb port , non working now 1 usb not working , 2 usb i know that it;s not working , sd card ok
if i close lid of mbp and leave him for few hrs and then open lid it pop up usb disabled , so I replug usb again and voila it work , but if I in any case do restart system usb will not work again so again I must close lid leave him for few hrs and open and usb work again , i'm so confused
Wow...nice one sir
The data line got hit by lightning 😂
Hi, when we don't have another borad to replace chip, how we can order the chip??
Thanks master
Hi, I have a tube of servisol silicone grease.can I use it on heat Sinks?
Very interesting